[DEFAULT] # # From cinder # # Backup metadata version to be used when backing up volume metadata. If this # number is bumped, make sure the service doing the restore supports the new # version. (integer value) #backup_metadata_version = 2 # The number of chunks or objects, for which one Ceilometer notification will # be sent (integer value) #backup_object_number_per_notification = 10 # Interval, in seconds, between two progress notifications reporting the backup # status (integer value) #backup_timer_interval = 120 # The maximum number of items that a collection resource returns in a single # response (integer value) #osapi_max_limit = 1000 # Base URL that will be presented to users in links to the OpenStack Volume API # (string value) # Deprecated group/name - [DEFAULT]/osapi_compute_link_prefix #osapi_volume_base_URL = # Ceph configuration file to use. (string value) #backup_ceph_conf = /etc/ceph/ceph.conf backup_ceph_conf = /etc/ceph/ceph.conf # The Ceph user to connect with. Default here is to use the same user as for # Cinder volumes. If not using cephx this should be set to None. (string value) #backup_ceph_user = cinder backup_ceph_user = cinder-backup # The chunk size, in bytes, that a backup is broken into before transfer to the # Ceph object store. (integer value) #backup_ceph_chunk_size = 134217728 backup_ceph_chunk_size = 134217728 # The Ceph pool where volume backups are stored. (string value) #backup_ceph_pool = backups backup_ceph_pool = backups # RBD stripe unit to use when creating a backup image. (integer value) #backup_ceph_stripe_unit = 0 backup_ceph_stripe_unit = 0 # RBD stripe count to use when creating a backup image. (integer value) #backup_ceph_stripe_count = 0 backup_ceph_stripe_count = 0 # If True, always discard excess bytes when restoring volumes i.e. pad with # zeroes. (boolean value) #restore_discard_excess_bytes = true restore_discard_excess_bytes = true # File with the list of available smbfs shares. (string value) #smbfs_shares_config = /etc/cinder/smbfs_shares # Default format that will be used when creating volumes if no volume format is # specified. (string value) # Allowed values: raw, qcow2, vhd, vhdx #smbfs_default_volume_format = qcow2 # Create volumes as sparsed files which take no space rather than regular files # when using raw format, in which case volume creation takes lot of time. # (boolean value) #smbfs_sparsed_volumes = true # Percent of ACTUAL usage of the underlying volume before no new volumes can be # allocated to the volume destination. (floating point value) #smbfs_used_ratio = 0.95 # This will compare the allocated to available space on the volume destination. # If the ratio exceeds this number, the destination will no longer be valid. # (floating point value) #smbfs_oversub_ratio = 1.0 # Base dir containing mount points for smbfs shares. (string value) #smbfs_mount_point_base = $state_path/mnt # Mount options passed to the smbfs client. See mount.cifs man page for # details. (string value) #smbfs_mount_options = noperm,file_mode=0775,dir_mode=0775 # Compression algorithm (None to disable) (string value) #backup_compression_algorithm = zlib # Use thin provisioning for SAN volumes? (boolean value) #san_thin_provision = true # IP address of SAN controller (string value) #san_ip = # Username for SAN controller (string value) #san_login = admin # Password for SAN controller (string value) #san_password = # Filename of private key to use for SSH authentication (string value) #san_private_key = # Cluster name to use for creating volumes (string value) #san_clustername = # SSH port to use with SAN (integer value) # Minimum value: 1 # Maximum value: 65535 #san_ssh_port = 22 # Execute commands locally instead of over SSH; use if the volume service is # running on the SAN device (boolean value) #san_is_local = false # SSH connection timeout in seconds (integer value) #ssh_conn_timeout = 30 # Minimum ssh connections in the pool (integer value) #ssh_min_pool_conn = 1 # Maximum ssh connections in the pool (integer value) #ssh_max_pool_conn = 5 # Configuration file for HDS NFS cinder plugin (string value) #hds_hnas_nfs_config_file = /opt/hds/hnas/cinder_nfs_conf.xml # Global backend request timeout, in seconds. (integer value) #violin_request_timeout = 300 # Option to enable strict host key checking. When set to "True" Cinder will # only connect to systems with a host key present in the configured # "ssh_hosts_key_file". When set to "False" the host key will be saved upon # first connection and used for subsequent connections. Default=False (boolean # value) #strict_ssh_host_key_policy = false # File containing SSH host keys for the systems with which Cinder needs to # communicate. OPTIONAL: Default=$state_path/ssh_known_hosts (string value) #ssh_hosts_key_file = $state_path/ssh_known_hosts # The storage family type used on the storage system; valid values are # ontap_7mode for using Data ONTAP operating in 7-Mode, ontap_cluster for using # clustered Data ONTAP, or eseries for using E-Series. (string value) # Allowed values: ontap_7mode, ontap_cluster, eseries #netapp_storage_family = ontap_cluster # The storage protocol to be used on the data path with the storage system. # (string value) # Allowed values: iscsi, fc, nfs #netapp_storage_protocol = # The hostname (or IP address) for the storage system or proxy server. (string # value) #netapp_server_hostname = # The TCP port to use for communication with the storage system or proxy # server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for # HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS. (integer value) #netapp_server_port = # The transport protocol used when communicating with the storage system or # proxy server. (string value) # Allowed values: http, https #netapp_transport_type = http # Administrative user account name used to access the storage system or proxy # server. (string value) #netapp_login = # Password for the administrative user account specified in the netapp_login # option. (string value) #netapp_password = # This option specifies the virtual storage server (Vserver) name on the # storage cluster on which provisioning of block storage volumes should occur. # (string value) #netapp_vserver = # The vFiler unit on which provisioning of block storage volumes will be done. # This option is only used by the driver when connecting to an instance with a # storage family of Data ONTAP operating in 7-Mode. Only use this option when # utilizing the MultiStore feature on the NetApp storage system. (string value) #netapp_vfiler = # The name of the config.conf stanza for a Data ONTAP (7-mode) HA partner. # This option is only used by the driver when connecting to an instance with a # storage family of Data ONTAP operating in 7-Mode, and it is required if the # storage protocol selected is FC. (string value) #netapp_partner_backend_name = # The quantity to be multiplied by the requested volume size to ensure enough # space is available on the virtual storage server (Vserver) to fulfill the # volume creation request. Note: this option is deprecated and will be removed # in favor of "reserved_percentage" in the Mitaka release. (floating point # value) #netapp_size_multiplier = 1.2 # This option determines if storage space is reserved for LUN allocation. If # enabled, LUNs are thick provisioned. If space reservation is disabled, # storage space is allocated on demand. (string value) # Allowed values: enabled, disabled #netapp_lun_space_reservation = enabled # If the percentage of available space for an NFS share has dropped below the # value specified by this option, the NFS image cache will be cleaned. (integer # value) #thres_avl_size_perc_start = 20 # When the percentage of available space on an NFS share has reached the # percentage specified by this option, the driver will stop clearing files from # the NFS image cache that have not been accessed in the last M minutes, where # M is the value of the expiry_thres_minutes configuration option. (integer # value) #thres_avl_size_perc_stop = 60 # This option specifies the threshold for last access time for images in the # NFS image cache. When a cache cleaning cycle begins, images in the cache that # have not been accessed in the last M minutes, where M is the value of this # parameter, will be deleted from the cache to create free space on the NFS # share. (integer value) #expiry_thres_minutes = 720 # This option is used to specify the path to the E-Series proxy application on # a proxy server. The value is combined with the value of the # netapp_transport_type, netapp_server_hostname, and netapp_server_port options # to create the URL used by the driver to connect to the proxy application. # (string value) #netapp_webservice_path = /devmgr/v2 # This option is only utilized when the storage family is configured to # eseries. This option is used to restrict provisioning to the specified # controllers. Specify the value of this option to be a comma separated list of # controller hostnames or IP addresses to be used for provisioning. (string # value) #netapp_controller_ips = # Password for the NetApp E-Series storage array. (string value) #netapp_sa_password = # This option specifies whether the driver should allow operations that require # multiple attachments to a volume. An example would be live migration of # servers that have volumes attached. When enabled, this backend is limited to # 256 total volumes in order to guarantee volumes can be accessed by more than # one host. (boolean value) #netapp_enable_multiattach = false # This option specifies the path of the NetApp copy offload tool binary. Ensure # that the binary has execute permissions set which allow the effective user of # the cinder-volume process to execute the file. (string value) #netapp_copyoffload_tool_path = # This option defines the type of operating system that will access a LUN # exported from Data ONTAP; it is assigned to the LUN at the time it is # created. (string value) #netapp_lun_ostype = # This option defines the type of operating system for all initiators that can # access a LUN. This information is used when mapping LUNs to individual hosts # or groups of hosts. (string value) # Deprecated group/name - [DEFAULT]/netapp_eseries_host_type #netapp_host_type = # This option is used to restrict provisioning to the specified pools. Specify # the value of this option to be a regular expression which will be applied to # the names of objects from the storage backend which represent pools in # Cinder. This option is only utilized when the storage protocol is configured # to use iSCSI or FC. (string value) # Deprecated group/name - [DEFAULT]/netapp_volume_list # Deprecated group/name - [DEFAULT]/netapp_storage_pools #netapp_pool_name_search_pattern = (.+) # Base dir containing mount point for gluster share. (string value) #glusterfs_backup_mount_point = $state_path/backup_mount # GlusterFS share in : format. # Eg: 1.2.3.4:backup_vol (string value) #glusterfs_backup_share = # Volume prefix for the backup id when backing up to TSM (string value) #backup_tsm_volume_prefix = backup # TSM password for the running username (string value) #backup_tsm_password = password # Enable or Disable compression for backups (boolean value) #backup_tsm_compression = true # Request for FC Zone creating host group (boolean value) #hpxp_zoning_request = false # Type of storage command line interface (string value) #hpxp_storage_cli = # ID of storage system (string value) #hpxp_storage_id = # Pool of storage system (string value) #hpxp_pool = # Thin pool of storage system (string value) #hpxp_thin_pool = # Logical device range of storage system (string value) #hpxp_ldev_range = # Default copy method of storage system. There are two valid values: "FULL" # specifies that a full copy; "THIN" specifies that a thin copy. Default value # is "FULL" (string value) #hpxp_default_copy_method = FULL # Copy speed of storage system (integer value) #hpxp_copy_speed = 3 # Interval to check copy (integer value) #hpxp_copy_check_interval = 3 # Interval to check copy asynchronously (integer value) #hpxp_async_copy_check_interval = 10 # Target port names for host group or iSCSI target (list value) #hpxp_target_ports = # Target port names of compute node for host group or iSCSI target (list value) #hpxp_compute_target_ports = # Request for creating host group or iSCSI target (boolean value) #hpxp_group_request = false # Instance numbers for HORCM (list value) #hpxp_horcm_numbers = 200,201 # Username of storage system for HORCM (string value) #hpxp_horcm_user = # Add to HORCM configuration (boolean value) #hpxp_horcm_add_conf = true # Resource group name of storage system for HORCM (string value) #hpxp_horcm_resource_name = meta_resource # Only discover a specific name of host group or iSCSI target (boolean value) #hpxp_horcm_name_only_discovery = false # Storage system storage pool for volumes (string value) #storwize_svc_volpool_name = volpool # Storage system space-efficiency parameter for volumes (percentage) (integer # value) # Minimum value: -1 # Maximum value: 100 #storwize_svc_vol_rsize = 2 # Storage system threshold for volume capacity warnings (percentage) (integer # value) # Minimum value: -1 # Maximum value: 100 #storwize_svc_vol_warning = 0 # Storage system autoexpand parameter for volumes (True/False) (boolean value) #storwize_svc_vol_autoexpand = true # Storage system grain size parameter for volumes (32/64/128/256) (integer # value) #storwize_svc_vol_grainsize = 256 # Storage system compression option for volumes (boolean value) #storwize_svc_vol_compression = false # Enable Easy Tier for volumes (boolean value) #storwize_svc_vol_easytier = true # The I/O group in which to allocate volumes (integer value) #storwize_svc_vol_iogrp = 0 # Maximum number of seconds to wait for FlashCopy to be prepared. (integer # value) # Minimum value: 1 # Maximum value: 600 #storwize_svc_flashcopy_timeout = 120 # Connection protocol (iSCSI/FC) (string value) #storwize_svc_connection_protocol = iSCSI # Configure CHAP authentication for iSCSI connections (Default: Enabled) # (boolean value) #storwize_svc_iscsi_chap_enabled = true # Connect with multipath (FC only; iSCSI multipath is controlled by Nova) # (boolean value) #storwize_svc_multipath_enabled = false # Allows vdisk to multi host mapping (boolean value) #storwize_svc_multihostmap_enabled = true # Indicate whether svc driver is compatible for NPIV setup. If it is # compatible, it will allow no wwpns being returned on get_conn_fc_wwpns during # initialize_connection. It should always be set to True. It will be deprecated # and removed in M release. (boolean value) #storwize_svc_npiv_compatibility_mode = true # Allow tenants to specify QOS on create (boolean value) #storwize_svc_allow_tenant_qos = false # If operating in stretched cluster mode, specify the name of the pool in which # mirrored copies are stored.Example: "pool2" (string value) #storwize_svc_stretched_cluster_partner = # Driver to use for backups. (string value) #backup_driver = cinder.backup.drivers.swift backup_driver = cinder.backup.drivers.ceph # Offload pending backup delete during backup service startup. (boolean value) #backup_service_inithost_offload = false # Make exception message format errors fatal. (boolean value) #fatal_exception_format_errors = false # IP address of this host (string value) #my_ip = 10.16.48.99 # Default glance host name or IP (string value) #glance_host = $my_ip glance_host = VARINET4ADDR # Default glance port (integer value) # Minimum value: 1 # Maximum value: 65535 #glance_port = 9292 # A list of the glance API servers available to cinder ([hostname|ip]:port) # (list value) #glance_api_servers = $glance_host:$glance_port # Version of the glance API to use (integer value) #glance_api_version = 1 # Number retries when downloading an image from glance (integer value) #glance_num_retries = 0 # Allow to perform insecure SSL (https) requests to glance (boolean value) #glance_api_insecure = false # Enables or disables negotiation of SSL layer compression. In some cases # disabling compression can improve data throughput, such as when high network # bandwidth is available and you use compressed image formats like qcow2. # (boolean value) #glance_api_ssl_compression = false # Location of ca certificates file to use for glance client requests. (string # value) #glance_ca_certificates_file = # http/https timeout value for glance operations. If no value (None) is # supplied here, the glanceclient default value is used. (integer value) #glance_request_timeout = # The topic that scheduler nodes listen on (string value) #scheduler_topic = cinder-scheduler # The topic that volume nodes listen on (string value) #volume_topic = cinder-volume # The topic that volume backup nodes listen on (string value) #backup_topic = cinder-backup # DEPRECATED: Deploy v1 of the Cinder API. (boolean value) #enable_v1_api = true enable_v1_api = True # Deploy v2 of the Cinder API. (boolean value) #enable_v2_api = true enable_v2_api = True # Enables or disables rate limit of the API. (boolean value) #api_rate_limit = true # Specify list of extensions to load when using osapi_volume_extension option # with cinder.api.contrib.select_extensions (list value) #osapi_volume_ext_list = # osapi volume extension to load (multi valued) #osapi_volume_extension = cinder.api.contrib.standard_extensions # Full class name for the Manager for volume (string value) #volume_manager = cinder.volume.manager.VolumeManager # Full class name for the Manager for volume backup (string value) #backup_manager = cinder.backup.manager.BackupManager # Full class name for the Manager for scheduler (string value) #scheduler_manager = cinder.scheduler.manager.SchedulerManager # Name of this node. This can be an opaque identifier. It is not necessarily a # host name, FQDN, or IP address. (string value) #host = x86-024.build.eng.bos.redhat.com host = VARHOSTNAME # Availability zone of this node (string value) #storage_availability_zone = nova storage_availability_zone = nova # Default availability zone for new volumes. If not set, the # storage_availability_zone option value is used as the default for new # volumes. (string value) #default_availability_zone = default_availability_zone = nova # If the requested Cinder availability zone is unavailable, fall back to the # value of default_availability_zone, then storage_availability_zone, instead # of failing. (boolean value) #allow_availability_zone_fallback = false # Default volume type to use (string value) #default_volume_type = # Time period for which to generate volume usages. The options are hour, day, # month, or year. (string value) #volume_usage_audit_period = month # Path to the rootwrap configuration file to use for running commands as root # (string value) #rootwrap_config = /etc/cinder/rootwrap.conf # Enable monkey patching (boolean value) #monkey_patch = false # List of modules/decorators to monkey patch (list value) #monkey_patch_modules = # Maximum time since last check-in for a service to be considered up (integer # value) #service_down_time = 60 # The full class name of the volume API class to use (string value) #volume_api_class = cinder.volume.api.API # The full class name of the volume backup API class (string value) #backup_api_class = cinder.backup.api.API # The strategy to use for auth. Supports noauth, keystone, and deprecated. # (string value) # Allowed values: noauth, keystone, deprecated #auth_strategy = keystone auth_strategy = keystone # A list of backend names to use. These backend names should be backed by a # unique [CONFIG] group with its options (list value) #enabled_backends = enabled_backends = ceph # Whether snapshots count against gigabyte quota (boolean value) #no_snapshot_gb_quota = false # The full class name of the volume transfer API class (string value) #transfer_api_class = cinder.transfer.api.API # The full class name of the volume replication API class (string value) #replication_api_class = cinder.replication.api.API # The full class name of the consistencygroup API class (string value) #consistencygroup_api_class = cinder.consistencygroup.api.API # OpenStack privileged account username. Used for requests to other services # (such as Nova) that require an account with special rights. (string value) #os_privileged_user_name = # Password associated with the OpenStack privileged account. (string value) #os_privileged_user_password = # Tenant name associated with the OpenStack privileged account. (string value) #os_privileged_user_tenant = # Auth URL associated with the OpenStack privileged account. (string value) #os_privileged_user_auth_url = # Multiplier used for weighing volume capacity. Negative numbers mean to stack # vs spread. (floating point value) #capacity_weight_multiplier = 1.0 # Multiplier used for weighing volume capacity. Negative numbers mean to stack # vs spread. (floating point value) #allocated_capacity_weight_multiplier = -1.0 # IP address of sheep daemon. (string value) #sheepdog_store_address = 127.0.0.1 # Port of sheep daemon. (integer value) # Minimum value: 1 # Maximum value: 65535 #sheepdog_store_port = 7000 # Specifies the path of the GPFS directory where Block Storage volume and # snapshot files are stored. (string value) #gpfs_mount_point_base = # Specifies the path of the Image service repository in GPFS. Leave undefined # if not storing images in GPFS. (string value) #gpfs_images_dir = # Specifies the type of image copy to be used. Set this when the Image service # repository also uses GPFS so that image files can be transferred efficiently # from the Image service to the Block Storage service. There are two valid # values: "copy" specifies that a full copy of the image is made; # "copy_on_write" specifies that copy-on-write optimization strategy is used # and unmodified blocks of the image file are shared efficiently. (string # value) # Allowed values: copy, copy_on_write, #gpfs_images_share_mode = # Specifies an upper limit on the number of indirections required to reach a # specific block due to snapshots or clones. A lengthy chain of copy-on-write # snapshots or clones can have a negative impact on performance, but improves # space utilization. 0 indicates unlimited clone depth. (integer value) #gpfs_max_clone_depth = 0 # Specifies that volumes are created as sparse files which initially consume no # space. If set to False, the volume is created as a fully allocated file, in # which case, creation may take a significantly longer time. (boolean value) #gpfs_sparse_volumes = true # Specifies the storage pool that volumes are assigned to. By default, the # system storage pool is used. (string value) #gpfs_storage_pool = system # Set 512 byte emulation on volume creation; (boolean value) #sf_emulate_512 = true # Allow tenants to specify QOS on create (boolean value) #sf_allow_tenant_qos = false # Create SolidFire accounts with this prefix. Any string can be used here, but # the string "hostname" is special and will create a prefix using the cinder # node hostname (previous default behavior). The default is NO prefix. (string # value) #sf_account_prefix = # Account name on the SolidFire Cluster to use as owner of template/cache # volumes (created if does not exist). (string value) #sf_template_account_name = openstack-vtemplate # Create an internal cache of copy of images when a bootable volume is created # to eliminate fetch from glance and qemu-conversion on subsequent calls. # (boolean value) #sf_allow_template_caching = true # Overrides default cluster SVIP with the one specified. This is required or # deployments that have implemented the use of VLANs for iSCSI networks in # their cloud. (string value) #sf_svip = # Create an internal mapping of volume IDs and account. Optimizes lookups and # performance at the expense of memory, very large deployments may want to # consider setting to False. (boolean value) #sf_enable_volume_mapping = true # SolidFire API port. Useful if the device api is behind a proxy on a different # port. (integer value) # Minimum value: 1 # Maximum value: 65535 #sf_api_port = 443 # IBMNAS platform type to be used as backend storage; valid values are - v7ku : # for using IBM Storwize V7000 Unified, sonas : for using IBM Scale Out NAS, # gpfs-nas : for using NFS based IBM GPFS deployments. (string value) # Allowed values: v7ku, sonas, gpfs-nas #ibmnas_platform_type = v7ku # The URL of the Swift endpoint (string value) #backup_swift_url = backup_swift_url = http://VARINET4ADDR:8080/v1/AUTH_ # Info to match when looking for swift in the service catalog. Format is: # separated values of the form: :: - # Only used if backup_swift_url is unset (string value) #swift_catalog_info = object-store:swift:publicURL # Swift authentication mechanism (string value) #backup_swift_auth = per_user # Swift authentication version. Specify "1" for auth 1.0, or "2" for auth 2.0 # (string value) #backup_swift_auth_version = 1 # Swift tenant/account name. Required when connecting to an auth 2.0 system # (string value) #backup_swift_tenant = # Swift user name (string value) #backup_swift_user = # Swift key for authentication (string value) #backup_swift_key = # The default Swift container to use (string value) #backup_swift_container = volumebackups backup_swift_container = volumes_backup # The size in bytes of Swift backup objects (integer value) #backup_swift_object_size = 52428800 # The size in bytes that changes are tracked for incremental backups. # backup_swift_object_size has to be multiple of backup_swift_block_size. # (integer value) #backup_swift_block_size = 32768 # The number of retries to make for Swift operations (integer value) #backup_swift_retry_attempts = 3 # The backoff time in seconds between Swift retries (integer value) #backup_swift_retry_backoff = 2 # Enable or Disable the timer to send the periodic progress notifications to # Ceilometer when backing up the volume to the Swift backend storage. The # default value is True to enable the timer. (boolean value) #backup_swift_enable_progress_timer = true # Location of the CA certificate file to use for swift client requests. (string # value) #backup_swift_ca_cert_file = # These values will be used for CloudByte storage's addQos API call. (dict # value) #cb_add_qosgroup = graceallowed:false,iops:10,iopscontrol:true,latency:15,memlimit:0,networkspeed:0,throughput:0,tpcontrol:false # These values will be used for CloudByte storage's createVolume API call. # (dict value) #cb_create_volume = blocklength:512B,compression:off,deduplication:off,protocoltype:ISCSI,recordsize:16k,sync:always # Driver will use this API key to authenticate against the CloudByte storage's # management interface. (string value) #cb_apikey = # CloudByte storage specific account name. This maps to a project name in # OpenStack. (string value) #cb_account_name = # This corresponds to the name of Tenant Storage Machine (TSM) in CloudByte # storage. A volume will be created in this TSM. (string value) #cb_tsm_name = # A retry value in seconds. Will be used by the driver to check if volume # creation was successful in CloudByte storage. (integer value) #cb_confirm_volume_create_retry_interval = 5 # Will confirm a successful volume creation in CloudByte storage by making this # many number of attempts. (integer value) #cb_confirm_volume_create_retries = 3 # A retry value in seconds. Will be used by the driver to check if volume # deletion was successful in CloudByte storage. (integer value) #cb_confirm_volume_delete_retry_interval = 5 # Will confirm a successful volume deletion in CloudByte storage by making this # many number of attempts. (integer value) #cb_confirm_volume_delete_retries = 3 # This corresponds to the discovery authentication group in CloudByte storage. # Chap users are added to this group. Driver uses the first user found for this # group. Default value is None. (string value) #cb_auth_group = None # Interval, in seconds, between nodes reporting state to datastore (integer # value) #report_interval = 10 # Interval, in seconds, between running periodic tasks (integer value) #periodic_interval = 60 # Range, in seconds, to randomly delay when starting the periodic task # scheduler to reduce stampeding. (Disable by setting to 0) (integer value) #periodic_fuzzy_delay = 60 # IP address on which OpenStack Volume API listens (string value) #osapi_volume_listen = 0.0.0.0 osapi_volume_listen = 0.0.0.0 # Port on which OpenStack Volume API listens (integer value) # Minimum value: 1 # Maximum value: 65535 #osapi_volume_listen_port = 8776 # Number of workers for OpenStack Volume API service. The default is equal to # the number of CPUs available. (integer value) #osapi_volume_workers = osapi_volume_workers = 12 # The full class name of the compute API class to use (string value) #compute_api_class = cinder.compute.nova.API # Number of nodes that should replicate the data. (string value) #drbdmanage_redundancy = 1 # Pool or Vdisk name to use for volume creation. (string value) #dothill_backend_name = A # linear (for Vdisk) or virtual (for Pool). (string value) # Allowed values: linear, virtual #dothill_backend_type = virtual # DotHill API interface protocol. (string value) # Allowed values: http, https #dothill_api_protocol = https # Whether to verify DotHill array SSL certificate. (boolean value) #dothill_verify_certificate = false # DotHill array SSL certificate path. (string value) #dothill_verify_certificate_path = # List of comma-separated target iSCSI IP addresses. (list value) #dothill_iscsi_ips = # File with the list of available gluster shares (string value) #glusterfs_shares_config = /etc/cinder/glusterfs_shares # Base dir containing mount points for gluster shares. (string value) #glusterfs_mount_point_base = $state_path/mnt # REST API authorization token. (string value) #pure_api_token = # ID of the project which will be used as the Cinder internal tenant. (string # value) #cinder_internal_tenant_project_id = # ID of the user to be used in volume operations as the Cinder internal tenant. # (string value) #cinder_internal_tenant_user_id = # The scheduler host manager class to use (string value) #scheduler_host_manager = cinder.scheduler.host_manager.HostManager # Maximum number of attempts to schedule an volume (integer value) #scheduler_max_attempts = 3 # Path or URL to Scality SOFS configuration file (string value) #scality_sofs_config = # Base dir where Scality SOFS shall be mounted (string value) #scality_sofs_mount_point = $state_path/scality # Path from Scality SOFS root to volume dir (string value) #scality_sofs_volume_dir = cinder/volumes # VNX authentication scope type. (string value) #storage_vnx_authentication_type = global # Directory path that contains the VNX security file. Make sure the security # file is generated first. (string value) #storage_vnx_security_file_dir = # Naviseccli Path. (string value) #naviseccli_path = # Comma-separated list of storage pool names to be used. (string value) # Deprecated group/name - [DEFAULT]/storage_vnx_pool_name #storage_vnx_pool_names = # VNX secondary SP IP Address. (string value) #san_secondary_ip = # Default timeout for CLI operations in minutes. For example, LUN migration is # a typical long running operation, which depends on the LUN size and the load # of the array. An upper bound in the specific deployment can be set to avoid # unnecessary long wait. By default, it is 365 days long. (integer value) #default_timeout = 525600 # Default max number of LUNs in a storage group. By default, the value is 255. # (integer value) #max_luns_per_storage_group = 255 # To destroy storage group when the last LUN is removed from it. By default, # the value is False. (boolean value) #destroy_empty_storage_group = false # Mapping between hostname and its iSCSI initiator IP addresses. (string value) #iscsi_initiators = # Comma separated iSCSI or FC ports to be used in Nova or Cinder. (string # value) #io_port_list = * # Automatically register initiators. By default, the value is False. (boolean # value) #initiator_auto_registration = false # Automatically deregister initiators after the related storage group is # destroyed. By default, the value is False. (boolean value) #initiator_auto_deregistration = false # Report free_capacity_gb as 0 when the limit to maximum number of pool LUNs is # reached. By default, the value is False. (boolean value) #check_max_pool_luns_threshold = false # Delete a LUN even if it is in Storage Groups. (boolean value) #force_delete_lun_in_storagegroup = false # Force LUN creation even if the full threshold of pool is reached. (boolean # value) #ignore_pool_full_threshold = false # IP address for connecting to VMware ESX/vCenter server. (string value) #vmware_host_ip = # Username for authenticating with VMware ESX/vCenter server. (string value) #vmware_host_username = # Password for authenticating with VMware ESX/vCenter server. (string value) #vmware_host_password = # Optional VIM service WSDL Location e.g http:///vimService.wsdl. # Optional over-ride to default location for bug work-arounds. (string value) #vmware_wsdl_location = # Number of times VMware ESX/vCenter server API must be retried upon connection # related issues. (integer value) #vmware_api_retry_count = 10 # The interval (in seconds) for polling remote tasks invoked on VMware # ESX/vCenter server. (floating point value) #vmware_task_poll_interval = 0.5 # Name of the vCenter inventory folder that will contain Cinder volumes. This # folder will be created under "OpenStack/", where # project_folder is of format "Project ()". (string value) #vmware_volume_folder = Volumes # Timeout in seconds for VMDK volume transfer between Cinder and Glance. # (integer value) #vmware_image_transfer_timeout_secs = 7200 # Max number of objects to be retrieved per batch. Query results will be # obtained in batches from the server and not in one shot. Server may still # limit the count to something less than the configured value. (integer value) #vmware_max_objects_retrieval = 100 # Optional string specifying the VMware vCenter server version. The driver # attempts to retrieve the version from VMware vCenter server. Set this # configuration only if you want to override the vCenter server version. # (string value) #vmware_host_version = # Directory where virtual disks are stored during volume backup and restore. # (string value) #vmware_tmp_dir = /tmp # CA bundle file to use in verifying the vCenter server certificate. (string # value) #vmware_ca_file = # If true, the vCenter server certificate is not verified. If false, then the # default CA truststore is used for verification. This option is ignored if # "vmware_ca_file" is set. (boolean value) #vmware_insecure = false # Name of a vCenter compute cluster where volumes should be created. (multi # valued) #vmware_cluster_name = # Pool or Vdisk name to use for volume creation. (string value) #lenovo_backend_name = A # linear (for VDisk) or virtual (for Pool). (string value) # Allowed values: linear, virtual #lenovo_backend_type = virtual # Lenovo api interface protocol. (string value) # Allowed values: http, https #lenovo_api_protocol = https # Whether to verify Lenovo array SSL certificate. (boolean value) #lenovo_verify_certificate = false # Lenovo array SSL certificate path. (string value) #lenovo_verify_certificate_path = # List of comma-separated target iSCSI IP addresses. (list value) #lenovo_iscsi_ips = # The maximum size in bytes of the files used to hold backups. If the volume # being backed up exceeds this size, then it will be backed up into multiple # files.backup_file_size must be a multiple of backup_sha_block_size_bytes. # (integer value) #backup_file_size = 1999994880 # The size in bytes that changes are tracked for incremental backups. # backup_file_size has to be multiple of backup_sha_block_size_bytes. (integer # value) #backup_sha_block_size_bytes = 32768 # Enable or Disable the timer to send the periodic progress notifications to # Ceilometer when backing up the volume to the backend storage. The default # value is True to enable the timer. (boolean value) #backup_enable_progress_timer = true # Path specifying where to store backups. (string value) #backup_posix_path = $state_path/backup # Custom directory to use for backups. (string value) #backup_container = # REST server port. (string value) #sio_rest_server_port = 443 # Whether to verify server certificate. (boolean value) #sio_verify_server_certificate = false # Server certificate path. (string value) #sio_server_certificate_path = # Whether to round volume capacity. (boolean value) #sio_round_volume_capacity = true # Whether to allow force delete. (boolean value) #sio_force_delete = false # Whether to unmap volume before deletion. (boolean value) #sio_unmap_volume_before_deletion = false # Protection domain id. (string value) #sio_protection_domain_id = # Protection domain name. (string value) #sio_protection_domain_name = # Storage pools. (string value) #sio_storage_pools = # Storage pool name. (string value) #sio_storage_pool_name = # Storage pool id. (string value) #sio_storage_pool_id = # Group name to use for creating volumes. Defaults to "group-0". (string value) #eqlx_group_name = group-0 # Timeout for the Group Manager cli command execution. Default is 30. Note that # this option is deprecated in favour of "ssh_conn_timeout" as specified in # cinder/volume/drivers/san/san.py and will be removed in M release. (integer # value) #eqlx_cli_timeout = 30 # Maximum retry count for reconnection. Default is 5. (integer value) #eqlx_cli_max_retries = 5 # Use CHAP authentication for targets. Note that this option is deprecated in # favour of "use_chap_auth" as specified in cinder/volume/driver.py and will be # removed in next release. (boolean value) #eqlx_use_chap = false # Existing CHAP account name. Note that this option is deprecated in favour of # "chap_username" as specified in cinder/volume/driver.py and will be removed # in next release. (string value) #eqlx_chap_login = admin # Password for specified CHAP account name. Note that this option is deprecated # in favour of "chap_password" as specified in cinder/volume/driver.py and will # be removed in the next release (string value) #eqlx_chap_password = password # Pool in which volumes will be created. Defaults to "default". (string value) #eqlx_pool = default # The number of characters in the salt. (integer value) #volume_transfer_salt_length = 8 # The number of characters in the autogenerated auth key. (integer value) #volume_transfer_key_length = 16 # Services to be added to the available pool on create (boolean value) #enable_new_services = true # Template string to be used to generate volume names (string value) #volume_name_template = volume-%s # Template string to be used to generate snapshot names (string value) #snapshot_name_template = snapshot-%s # Template string to be used to generate backup names (string value) #backup_name_template = backup-%s # Multiplier used for weighing volume number. Negative numbers mean to spread # vs stack. (floating point value) #volume_number_multiplier = -1.0 # Default storage pool for volumes. (integer value) #ise_storage_pool = 1 # Raid level for ISE volumes. (integer value) #ise_raid = 1 # Number of retries (per port) when establishing connection to ISE management # port. (integer value) #ise_connection_retries = 5 # Interval (secs) between retries. (integer value) #ise_retry_interval = 1 # Number on retries to get completion status after issuing a command to ISE. # (integer value) #ise_completion_retries = 30 # Storage pool name. (string value) #zfssa_pool = # Project name. (string value) #zfssa_project = # Block size. (string value) # Allowed values: 512, 1k, 2k, 4k, 8k, 16k, 32k, 64k, 128k #zfssa_lun_volblocksize = 8k # Flag to enable sparse (thin-provisioned): True, False. (boolean value) #zfssa_lun_sparse = false # Data compression. (string value) # Allowed values: off, lzjb, gzip-2, gzip, gzip-9 #zfssa_lun_compression = off # Synchronous write bias. (string value) # Allowed values: latency, throughput #zfssa_lun_logbias = latency # iSCSI initiator group. (string value) #zfssa_initiator_group = # iSCSI initiator IQNs. (comma separated) (string value) #zfssa_initiator = # iSCSI initiator CHAP user (name). (string value) #zfssa_initiator_user = # Secret of the iSCSI initiator CHAP user. (string value) #zfssa_initiator_password = # iSCSI initiators configuration. (string value) #zfssa_initiator_config = # iSCSI target group name. (string value) #zfssa_target_group = tgt-grp # iSCSI target CHAP user (name). (string value) #zfssa_target_user = # Secret of the iSCSI target CHAP user. (string value) #zfssa_target_password = # iSCSI target portal (Data-IP:Port, w.x.y.z:3260). (string value) #zfssa_target_portal = # Network interfaces of iSCSI targets. (comma separated) (string value) #zfssa_target_interfaces = # REST connection timeout. (seconds) (integer value) #zfssa_rest_timeout = # IP address used for replication data. (maybe the same as data ip) (string # value) #zfssa_replication_ip = # Flag to enable local caching: True, False. (boolean value) #zfssa_enable_local_cache = true # Name of ZFSSA project where cache volumes are stored. (string value) #zfssa_cache_project = os-cinder-cache # Sets the value of TCP_KEEPALIVE (True/False) for each server socket. (boolean # value) #tcp_keepalive = true # Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not # supported on OS X. (integer value) #tcp_keepidle = 600 # Sets the value of TCP_KEEPINTVL in seconds for each server socket. Not # supported on OS X. (integer value) #tcp_keepalive_interval = # Sets the value of TCP_KEEPCNT for each server socket. Not supported on OS X. # (integer value) #tcp_keepalive_count = # CA certificate file to use to verify connecting clients (string value) #ssl_ca_file = # Certificate file to use when starting the server securely (string value) #ssl_cert_file = # Private key file to use when starting the server securely (string value) #ssl_key_file = # Maximum line size of message headers to be accepted. max_header_line may need # to be increased when using large tokens (typically those generated by the # Keystone v3 API with big service catalogs). (integer value) #max_header_line = 16384 # Timeout for client connections' socket operations. If an incoming connection # is idle for this number of seconds it will be closed. A value of '0' means # wait forever. (integer value) #client_socket_timeout = 900 # If False, closes the client socket connection explicitly. Setting it to True # to maintain backward compatibility. Recommended setting is set it to False. # (boolean value) #wsgi_keep_alive = true # Number of times to attempt to run flakey shell commands (integer value) #num_shell_tries = 3 # The percentage of backend capacity is reserved (integer value) # Maximum value: 100 #reserved_percentage = 0 # Prefix for iSCSI volumes (string value) #iscsi_target_prefix = iqn.2010-10.org.openstack: # The IP address that the iSCSI daemon is listening on (string value) #iscsi_ip_address = $my_ip # The list of secondary IP addresses of the iSCSI daemon (list value) #iscsi_secondary_ip_addresses = # The port that the iSCSI daemon is listening on (integer value) # Minimum value: 1 # Maximum value: 65535 #iscsi_port = 3260 # The maximum number of times to rescan targets to find volume (integer value) #num_volume_device_scan_tries = 3 # The backend name for a given driver implementation (string value) #volume_backend_name = # Do we attach/detach volumes in cinder using multipath for volume to image and # image to volume transfers? (boolean value) #use_multipath_for_image_xfer = false # If this is set to True, attachment of volumes for image transfer will be # aborted when multipathd is not running. Otherwise, it will fallback to single # path. (boolean value) #enforce_multipath_for_image_xfer = false # Method used to wipe old volumes (string value) # Allowed values: none, zero, shred #volume_clear = zero # Size in MiB to wipe at start of old volumes. 0 => all (integer value) #volume_clear_size = 0 # The flag to pass to ionice to alter the i/o priority of the process used to # zero a volume after deletion, for example "-c3" for idle only priority. # (string value) #volume_clear_ionice = # iSCSI target user-land tool to use. tgtadm is default, use lioadm for LIO # iSCSI support, scstadmin for SCST target support, iseradm for the ISER # protocol, ietadm for iSCSI Enterprise Target, iscsictl for Chelsio iSCSI # Target or fake for testing. (string value) # Allowed values: tgtadm, lioadm, scstadmin, iseradm, iscsictl, ietadm, fake #iscsi_helper = tgtadm # Volume configuration file storage directory (string value) #volumes_dir = $state_path/volumes # IET configuration file (string value) #iet_conf = /etc/iet/ietd.conf # Chiscsi (CXT) global defaults configuration file (string value) #chiscsi_conf = /etc/chelsio-iscsi/chiscsi.conf # Sets the behavior of the iSCSI target to either perform blockio or fileio # optionally, auto can be set and Cinder will autodetect type of backing device # (string value) # Allowed values: blockio, fileio, auto #iscsi_iotype = fileio # The default block size used when copying/clearing volumes (string value) #volume_dd_blocksize = 1M # The blkio cgroup name to be used to limit bandwidth of volume copy (string # value) #volume_copy_blkio_cgroup_name = cinder-volume-copy # The upper limit of bandwidth of volume copy. 0 => unlimited (integer value) #volume_copy_bps_limit = 0 # Sets the behavior of the iSCSI target to either perform write-back(on) or # write-through(off). This parameter is valid if iscsi_helper is set to tgtadm # or iseradm. (string value) # Allowed values: on, off #iscsi_write_cache = on # Sets the target-specific flags for the iSCSI target. Only used for tgtadm to # specify backing device flags using bsoflags option. The specified string is # passed as is to the underlying tool. (string value) #iscsi_target_flags = # Determines the iSCSI protocol for new iSCSI volumes, created with tgtadm or # lioadm target helpers. In order to enable RDMA, this parameter should be set # with the value "iser". The supported iSCSI protocol values are "iscsi" and # "iser". (string value) # Allowed values: iscsi, iser #iscsi_protocol = iscsi # The path to the client certificate key for verification, if the driver # supports it. (string value) #driver_client_cert_key = # The path to the client certificate for verification, if the driver supports # it. (string value) #driver_client_cert = # Tell driver to use SSL for connection to backend storage if the driver # supports it. (boolean value) #driver_use_ssl = false # Float representation of the over subscription ratio when thin provisioning is # involved. Default ratio is 20.0, meaning provisioned capacity can be 20 times # of the total physical capacity. If the ratio is 10.5, it means provisioned # capacity can be 10.5 times of the total physical capacity. A ratio of 1.0 # means provisioned capacity cannot exceed the total physical capacity. A ratio # lower than 1.0 will be ignored and the default value will be used instead. # (floating point value) #max_over_subscription_ratio = 20.0 # Certain ISCSI targets have predefined target names, SCST target driver uses # this name. (string value) #scst_target_iqn_name = # SCST target implementation can choose from multiple SCST target drivers. # (string value) #scst_target_driver = iscsi # Option to enable/disable CHAP authentication for targets. (boolean value) # Deprecated group/name - [DEFAULT]/eqlx_use_chap #use_chap_auth = false # CHAP user name. (string value) # Deprecated group/name - [DEFAULT]/eqlx_chap_login #chap_username = # Password for specified CHAP account name. (string value) # Deprecated group/name - [DEFAULT]/eqlx_chap_password #chap_password = # Namespace for driver private data values to be saved in. (string value) #driver_data_namespace = # String representation for an equation that will be used to filter hosts. Only # used when the driver filter is set to be used by the Cinder scheduler. # (string value) #filter_function = # String representation for an equation that will be used to determine the # goodness of a host. Only used when using the goodness weigher is set to be # used by the Cinder scheduler. (string value) #goodness_function = # If set to True the http client will validate the SSL certificate of the # backend endpoint. (boolean value) #driver_ssl_cert_verify = false # List of options that control which trace info is written to the DEBUG log # level to assist developers. Valid values are method and api. (list value) #trace_flags = # There are two types of target configurations managed (replicate to another # configured backend) or unmanaged (replicate to a device not managed by # Cinder). (boolean value) #managed_replication_target = true # List of k/v pairs representing a replication target for this backend device. # For unmanaged the format is: {'key-1'='val1' 'key-2'='val2'...},{...} and for # managed devices its simply a list of valid configured backend_names that the # driver supports replicating to: backend-a,bakcend-b... (list value) #replication_devices = # If set to True, upload-to-image in raw format will create a cloned volume and # register its location to the image service, instead of uploading the volume # content. The cinder backend and locations support must be enabled in the # image service, and glance_api_version must be set to 2. (boolean value) #image_upload_use_cinder_backend = false # If set to True, the image volume created by upload-to-image will be placed in # the internal tenant. Otherwise, the image volume is created in the current # context's tenant. (boolean value) #image_upload_use_internal_tenant = false # Enable the image volume cache for this backend. (boolean value) #image_volume_cache_enabled = false # Max size of the image volume cache for this backend in GB. 0 => unlimited. # (integer value) #image_volume_cache_max_size_gb = 0 # Max number of entries allowed in the image volume cache. 0 => unlimited. # (integer value) #image_volume_cache_max_count = 0 # The maximum number of times to rescan iSER targetto find volume (integer # value) #num_iser_scan_tries = 3 # Prefix for iSER volumes (string value) #iser_target_prefix = iqn.2010-10.org.openstack: # The IP address that the iSER daemon is listening on (string value) #iser_ip_address = $my_ip # The port that the iSER daemon is listening on (integer value) # Minimum value: 1 # Maximum value: 65535 #iser_port = 3260 # The name of the iSER target user-land tool to use (string value) #iser_helper = tgtadm # Public url to use for versions endpoint. The default is None, which will use # the request's host_url attribute to populate the URL base. If Cinder is # operating behind a proxy, you will want to change this to represent the # proxy's URL. (string value) #public_endpoint = # Nimble Controller pool name (string value) #nimble_pool_name = default # Nimble Subnet Label (string value) #nimble_subnet_label = * # Path to store VHD backed volumes (string value) #windows_iscsi_lun_path = C:\iSCSIVirtualDisks # Pool or Vdisk name to use for volume creation. (string value) #hpmsa_backend_name = A # linear (for Vdisk) or virtual (for Pool). (string value) # Allowed values: linear, virtual #hpmsa_backend_type = virtual # HPMSA API interface protocol. (string value) # Allowed values: http, https #hpmsa_api_protocol = https # Whether to verify HPMSA array SSL certificate. (boolean value) #hpmsa_verify_certificate = false # HPMSA array SSL certificate path. (string value) #hpmsa_verify_certificate_path = # List of comma-separated target iSCSI IP addresses. (list value) #hpmsa_iscsi_ips = # A list of url schemes that can be downloaded directly via the direct_url. # Currently supported schemes: [file]. (list value) #allowed_direct_url_schemes = # Default core properties of image (list value) #glance_core_properties = checksum,container_format,disk_format,image_name,image_id,min_disk,min_ram,name,size # Name for the VG that will contain exported volumes (string value) #volume_group = cinder-volumes # If >0, create LVs with multiple mirrors. Note that this requires lvm_mirrors # + 2 PVs with available space (integer value) #lvm_mirrors = 0 # Type of LVM volumes to deploy; (default, thin, or auto). Auto defaults to # thin if thin is supported. (string value) # Allowed values: default, thin, auto #lvm_type = default # LVM conf file to use for the LVM driver in Cinder; this setting is ignored if # the specified file does not exist (You can also specify 'None' to not use a # conf file even if one exists). (string value) #lvm_conf_file = /etc/cinder/lvm.conf # use this file for cinder emc plugin config data (string value) #cinder_emc_config_file = /etc/cinder/cinder_emc_config.xml # IP address or Hostname of NAS system. (string value) #nas_ip = # User name to connect to NAS system. (string value) #nas_login = admin # Password to connect to NAS system. (string value) #nas_password = # SSH port to use to connect to NAS system. (integer value) # Minimum value: 1 # Maximum value: 65535 #nas_ssh_port = 22 # Filename of private key to use for SSH authentication. (string value) #nas_private_key = # Allow network-attached storage systems to operate in a secure environment # where root level access is not permitted. If set to False, access is as the # root user and insecure. If set to True, access is not as root. If set to # auto, a check is done to determine if this is a new installation: True is # used if so, otherwise False. Default is auto. (string value) #nas_secure_file_operations = auto # Set more secure file permissions on network-attached storage volume files to # restrict broad other/world access. If set to False, volumes are created with # open permissions. If set to True, volumes are created with permissions for # the cinder user and group (660). If set to auto, a check is done to determine # if this is a new installation: True is used if so, otherwise False. Default # is auto. (string value) #nas_secure_file_permissions = auto # Path to the share to use for storing Cinder volumes. For example: # "/srv/export1" for an NFS server export available at 10.0.5.10:/srv/export1 . # (string value) #nas_share_path = # Options used to mount the storage backend file system where Cinder volumes # are stored. (string value) #nas_mount_options = # Provisioning type that will be used when creating volumes. (string value) # Allowed values: thin, thick # Deprecated group/name - [DEFAULT]/glusterfs_sparsed_volumes # Deprecated group/name - [DEFAULT]/glusterfs_qcow2_volumes #nas_volume_prov_type = thin # IP address or hostname of mg-a (string value) #gateway_mga = # IP address or hostname of mg-b (string value) #gateway_mgb = # Use igroups to manage targets and initiators (boolean value) #use_igroups = false # Global backend request timeout, in seconds (integer value) #request_timeout = 300 # Comma-separated list of REST servers IP to connect to. (eg # http://IP1/,http://IP2:81/path (string value) #srb_base_urls = # XMS cluster id in multi-cluster environment (string value) #xtremio_cluster_name = # Number of retries in case array is busy (integer value) #xtremio_array_busy_retry_count = 5 # Interval between retries in case array is busy (integer value) #xtremio_array_busy_retry_interval = 5 # Serial number of storage system (string value) #hitachi_serial_number = # Name of an array unit (string value) #hitachi_unit_name = # Pool ID of storage system (integer value) #hitachi_pool_id = # Thin pool ID of storage system (integer value) #hitachi_thin_pool_id = # Range of logical device of storage system (string value) #hitachi_ldev_range = # Default copy method of storage system (string value) #hitachi_default_copy_method = FULL # Copy speed of storage system (integer value) #hitachi_copy_speed = 3 # Interval to check copy (integer value) #hitachi_copy_check_interval = 3 # Interval to check copy asynchronously (integer value) #hitachi_async_copy_check_interval = 10 # Control port names for HostGroup or iSCSI Target (string value) #hitachi_target_ports = # Range of group number (string value) #hitachi_group_range = # Request for creating HostGroup or iSCSI Target (boolean value) #hitachi_group_request = false # Infortrend raid pool name list. It is separated with comma. (string value) #infortrend_pools_name = # The Infortrend CLI absolute path. By default, it is at # /opt/bin/Infortrend/raidcmd_ESDS10.jar (string value) #infortrend_cli_path = /opt/bin/Infortrend/raidcmd_ESDS10.jar # Maximum retry time for cli. Default is 5. (integer value) #infortrend_cli_max_retries = 5 # Default timeout for CLI copy operations in minutes. Support: migrate volume, # create cloned volume and create volume from snapshot. By Default, it is 30 # minutes. (integer value) #infortrend_cli_timeout = 30 # Infortrend raid channel ID list on Slot A for OpenStack usage. It is # separated with comma. By default, it is the channel 0~7. (string value) #infortrend_slots_a_channels_id = 0,1,2,3,4,5,6,7 # Infortrend raid channel ID list on Slot B for OpenStack usage. It is # separated with comma. By default, it is the channel 0~7. (string value) #infortrend_slots_b_channels_id = 0,1,2,3,4,5,6,7 # Let the volume use specific provisioning. By default, it is the full # provisioning. The supported options are full or thin. (string value) #infortrend_provisioning = full # Let the volume use specific tiering level. By default, it is the level 0. The # supported levels are 0,2,3,4. (string value) #infortrend_tiering = 0 # Configuration file for HDS iSCSI cinder plugin (string value) #hds_hnas_iscsi_config_file = /opt/hds/hnas/cinder_iscsi_conf.xml # The name of ceph cluster (string value) #rbd_cluster_name = ceph # The RADOS pool where rbd volumes are stored (string value) #rbd_pool = rbd # The RADOS client name for accessing rbd volumes - only set when using cephx # authentication (string value) #rbd_user = # Path to the ceph configuration file (string value) #rbd_ceph_conf = # Flatten volumes created from snapshots to remove dependency from volume to # snapshot (boolean value) #rbd_flatten_volume_from_snapshot = false # The libvirt uuid of the secret for the rbd_user volumes (string value) #rbd_secret_uuid = # Directory where temporary image files are stored when the volume driver does # not write them directly to the volume. Warning: this option is now # deprecated, please use image_conversion_dir instead. (string value) #volume_tmp_dir = # Maximum number of nested volume clones that are taken before a flatten # occurs. Set to 0 to disable cloning. (integer value) #rbd_max_clone_depth = 5 # Volumes will be chunked into objects of this size (in megabytes). (integer # value) #rbd_store_chunk_size = 4 # Timeout value (in seconds) used when connecting to ceph cluster. If value < # 0, no timeout is set and default librados value is used. (integer value) #rados_connect_timeout = -1 # Number of retries if connection to ceph cluster failed. (integer value) #rados_connection_retries = 3 # Interval value (in seconds) between connection retries to ceph cluster. # (integer value) #rados_connection_interval = 5 # The hostname (or IP address) for the storage system (string value) #tintri_server_hostname = # User name for the storage system (string value) #tintri_server_username = # Password for the storage system (string value) #tintri_server_password = # API version for the storage system (string value) #tintri_api_version = v310 # Instance numbers for HORCM (string value) #hitachi_horcm_numbers = 200,201 # Username of storage system for HORCM (string value) #hitachi_horcm_user = # Password of storage system for HORCM (string value) #hitachi_horcm_password = # Add to HORCM configuration (boolean value) #hitachi_horcm_add_conf = true # Timeout until a resource lock is released, in seconds. The value must be # between 0 and 7200. (integer value) #hitachi_horcm_resource_lock_timeout = 600 # HP LeftHand WSAPI Server Url like https://:8081/lhos (string # value) #hplefthand_api_url = # HP LeftHand Super user username (string value) #hplefthand_username = # HP LeftHand Super user password (string value) #hplefthand_password = # HP LeftHand cluster name (string value) #hplefthand_clustername = # Configure CHAP authentication for iSCSI connections (Default: Disabled) # (boolean value) #hplefthand_iscsi_chap_enabled = false # Enable HTTP debugging to LeftHand (boolean value) #hplefthand_debug = false # Administrative user account name used to access the storage system or proxy # server. (string value) #netapp_login = # Password for the administrative user account specified in the netapp_login # option. (string value) #netapp_password = # The hostname (or IP address) for the storage system or proxy server. (string # value) #netapp_server_hostname = # The TCP port to use for communication with the storage system or proxy # server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for # HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS. (integer value) #netapp_server_port = # This option is used to specify the path to the E-Series proxy application on # a proxy server. The value is combined with the value of the # netapp_transport_type, netapp_server_hostname, and netapp_server_port options # to create the URL used by the driver to connect to the proxy application. # (string value) #netapp_webservice_path = /devmgr/v2 # This option is only utilized when the storage family is configured to # eseries. This option is used to restrict provisioning to the specified # controllers. Specify the value of this option to be a comma separated list of # controller hostnames or IP addresses to be used for provisioning. (string # value) #netapp_controller_ips = # Password for the NetApp E-Series storage array. (string value) #netapp_sa_password = # This option specifies whether the driver should allow operations that require # multiple attachments to a volume. An example would be live migration of # servers that have volumes attached. When enabled, this backend is limited to # 256 total volumes in order to guarantee volumes can be accessed by more than # one host. (boolean value) #netapp_enable_multiattach = false # The transport protocol used when communicating with the storage system or # proxy server. (string value) # Allowed values: http, https #netapp_transport_type = http # This option defines the type of operating system that will access a LUN # exported from Data ONTAP; it is assigned to the LUN at the time it is # created. (string value) #netapp_lun_ostype = # This option defines the type of operating system for all initiators that can # access a LUN. This information is used when mapping LUNs to individual hosts # or groups of hosts. (string value) # Deprecated group/name - [DEFAULT]/netapp_eseries_host_type #netapp_host_type = # This option is used to restrict provisioning to the specified pools. Specify # the value of this option to be a regular expression which will be applied to # the names of objects from the storage backend which represent pools in # Cinder. This option is only utilized when the storage protocol is configured # to use iSCSI or FC. (string value) # Deprecated group/name - [DEFAULT]/netapp_volume_list # Deprecated group/name - [DEFAULT]/netapp_storage_pools #netapp_pool_name_search_pattern = (.+) # Request for FC Zone creating HostGroup (boolean value) #hitachi_zoning_request = false # Number of volumes allowed per project (integer value) #quota_volumes = 10 # Number of volume snapshots allowed per project (integer value) #quota_snapshots = 10 # Number of consistencygroups allowed per project (integer value) #quota_consistencygroups = 10 # Total amount of storage, in gigabytes, allowed for volumes and snapshots per # project (integer value) #quota_gigabytes = 1000 # Number of volume backups allowed per project (integer value) #quota_backups = 10 # Total amount of storage, in gigabytes, allowed for backups per project # (integer value) #quota_backup_gigabytes = 1000 # Number of seconds until a reservation expires (integer value) #reservation_expire = 86400 # Count of reservations until usage is refreshed (integer value) #until_refresh = 0 # Number of seconds between subsequent usage refreshes (integer value) #max_age = 0 # Default driver to use for quota checks (string value) #quota_driver = cinder.quota.DbQuotaDriver # Enables or disables use of default quota class with default quota. (boolean # value) #use_default_quota_class = true # Max size allowed per volume, in gigabytes (integer value) #per_volume_size_limit = -1 # The configuration file for the Cinder Huawei driver. (string value) #cinder_huawei_conf_file = /etc/cinder/cinder_huawei_conf.xml # Storage Center System Serial Number (integer value) #dell_sc_ssn = 64702 # Dell API port (integer value) # Minimum value: 1 # Maximum value: 65535 #dell_sc_api_port = 3033 # Name of the server folder to use on the Storage Center (string value) #dell_sc_server_folder = openstack # Name of the volume folder to use on the Storage Center (string value) #dell_sc_volume_folder = openstack # Enable HTTPS SC certificate verification. (boolean value) #dell_sc_verify_cert = false # Which filter class names to use for filtering hosts when not specified in the # request. (list value) #scheduler_default_filters = AvailabilityZoneFilter,CapacityFilter,CapabilitiesFilter # Which weigher class names to use for weighing hosts. (list value) #scheduler_default_weighers = CapacityWeigher # Base dir containing mount point for NFS share. (string value) #backup_mount_point_base = $state_path/backup_mount # NFS share in hostname:path, ipv4addr:path, or "[ipv6addr]:path" format. # (string value) #backup_share = # Mount options passed to the NFS client. See NFS man page for details. (string # value) #backup_mount_options = # IP address/hostname of Blockbridge API. (string value) #blockbridge_api_host = # Override HTTPS port to connect to Blockbridge API server. (integer value) #blockbridge_api_port = # Blockbridge API authentication scheme (token or password) (string value) # Allowed values: token, password #blockbridge_auth_scheme = token # Blockbridge API token (for auth scheme 'token') (string value) #blockbridge_auth_token = # Blockbridge API user (for auth scheme 'password') (string value) #blockbridge_auth_user = # Blockbridge API password (for auth scheme 'password') (string value) #blockbridge_auth_password = # Defines the set of exposed pools and their associated backend query strings # (dict value) #blockbridge_pools = OpenStack:+openstack # Default pool name if unspecified. (string value) #blockbridge_default_pool = # Data path IP address (string value) #zfssa_data_ip = # HTTPS port number (string value) #zfssa_https_port = 443 # Options to be passed while mounting share over nfs (string value) #zfssa_nfs_mount_options = # Storage pool name. (string value) #zfssa_nfs_pool = # Project name. (string value) #zfssa_nfs_project = NFSProject # Share name. (string value) #zfssa_nfs_share = nfs_share # Data compression. (string value) # Allowed values: off, lzjb, gzip-2, gzip, gzip-9 #zfssa_nfs_share_compression = off # Synchronous write bias-latency, throughput. (string value) # Allowed values: latency, throughput #zfssa_nfs_share_logbias = latency # REST connection timeout. (seconds) (integer value) #zfssa_rest_timeout = # Flag to enable local caching: True, False. (boolean value) #zfssa_enable_local_cache = true # Name of directory inside zfssa_nfs_share where cache volumes are stored. # (string value) #zfssa_cache_directory = os-cinder-cache # Space network name to use for data transfer (string value) #hgst_net = Net 1 (IPv4) # Comma separated list of Space storage servers:devices. ex: # os1_stor:gbd0,os2_stor:gbd0 (string value) #hgst_storage_servers = os:gbd0 # Should spaces be redundantly stored (1/0) (string value) #hgst_redundancy = 0 # User to own created spaces (string value) #hgst_space_user = root # Group to own created spaces (string value) #hgst_space_group = disk # UNIX mode for created spaces (string value) #hgst_space_mode = 0600 # Directory used for temporary storage during image conversion (string value) #image_conversion_dir = $state_path/conversion # Match this value when searching for nova in the service catalog. Format is: # separated values of the form: :: # (string value) #nova_catalog_info = compute:Compute Service:publicURL nova_catalog_info = compute:nova:publicURL # Same as nova_catalog_info, but for admin endpoint. (string value) #nova_catalog_admin_info = compute:Compute Service:adminURL nova_catalog_admin_info = compute:nova:adminURL # Override service catalog lookup with template for nova endpoint e.g. # http://localhost:8774/v2/%(project_id)s (string value) #nova_endpoint_template = # Same as nova_endpoint_template, but for admin endpoint. (string value) #nova_endpoint_admin_template = # Region name of this node (string value) #os_region_name = # Location of ca certificates file to use for nova client requests. (string # value) #nova_ca_certificates_file = # Allow to perform insecure SSL requests to nova (boolean value) #nova_api_insecure = false # Connect with multipath (FC only).(Default is false.) (boolean value) #flashsystem_multipath_enabled = false # DPL pool uuid in which DPL volumes are stored. (string value) #dpl_pool = # DPL port number. (integer value) # Minimum value: 1 # Maximum value: 65535 #dpl_port = 8357 # Add CHAP user (boolean value) #hitachi_add_chap_user = false # iSCSI authentication method (string value) #hitachi_auth_method = # iSCSI authentication username (string value) #hitachi_auth_user = HBSD-CHAP-user # iSCSI authentication password (string value) #hitachi_auth_password = HBSD-CHAP-password # Driver to use for volume creation (string value) #volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver # Timeout for creating the volume to migrate to when performing volume # migration (seconds) (integer value) #migration_create_volume_timeout_secs = 300 # Offload pending volume delete during volume service startup (boolean value) #volume_service_inithost_offload = false # FC Zoning mode configured (string value) #zoning_mode = none # User defined capabilities, a JSON formatted string specifying key/value # pairs. The key/value pairs can be used by the CapabilitiesFilter to select # between backends when requests specify volume types. For example, specifying # a service level or the geographical location of a backend, then creating a # volume type to allow the user to select by these different properties. # (string value) #extra_capabilities = {} # Default iSCSI Port ID of FlashSystem. (Default port is 0.) (integer value) #flashsystem_iscsi_portid = 0 # Connection protocol should be FC. (Default is FC.) (string value) #flashsystem_connection_protocol = FC # Allows vdisk to multi host mapping. (Default is True) (boolean value) #flashsystem_multihostmap_enabled = true # 3PAR WSAPI Server Url like https://<3par ip>:8080/api/v1 (string value) #hp3par_api_url = # 3PAR username with the 'edit' role (string value) #hp3par_username = # 3PAR password for the user specified in hp3par_username (string value) #hp3par_password = # List of the CPG(s) to use for volume creation (list value) #hp3par_cpg = OpenStack # The CPG to use for Snapshots for volumes. If empty the userCPG will be used. # (string value) #hp3par_cpg_snap = # The time in hours to retain a snapshot. You can't delete it before this # expires. (string value) #hp3par_snapshot_retention = # The time in hours when a snapshot expires and is deleted. This must be # larger than expiration (string value) #hp3par_snapshot_expiration = # Enable HTTP debugging to 3PAR (boolean value) #hp3par_debug = false # List of target iSCSI addresses to use. (list value) #hp3par_iscsi_ips = # Enable CHAP authentication for iSCSI connections. (boolean value) #hp3par_iscsi_chap_enabled = false # Proxy driver that connects to the IBM Storage Array (string value) #xiv_ds8k_proxy = xiv_ds8k_openstack.nova_proxy.XIVDS8KNovaProxy # Connection type to the IBM Storage Array (string value) # Allowed values: fibre_channel, iscsi #xiv_ds8k_connection_type = iscsi # CHAP authentication mode, effective only for iscsi (disabled|enabled) (string # value) # Allowed values: disabled, enabled #xiv_chap = disabled # List of Management IP addresses (separated by commas) (string value) #management_ips = # DEPRECATED: This will be removed in the Liberty release. Use san_login and # san_password instead. This directly sets the Datera API token. (string value) #datera_api_token = # Datera API port. (string value) #datera_api_port = 7717 # Datera API version. (string value) #datera_api_version = 1 # Number of replicas to create of an inode. (string value) #datera_num_replicas = 3 # List of all available devices (list value) #available_devices = # URL to the Quobyte volume e.g., quobyte:/// (string # value) #quobyte_volume_url = # Path to a Quobyte Client configuration file. (string value) #quobyte_client_cfg = # Create volumes as sparse files which take no space. If set to False, volume # is created as regular file.In such case volume creation takes a lot of time. # (boolean value) #quobyte_sparsed_volumes = true # Create volumes as QCOW2 files rather than raw files. (boolean value) #quobyte_qcow2_volumes = true # Base dir containing the mount point for the Quobyte volume. (string value) #quobyte_mount_point_base = $state_path/mnt # File with the list of available vzstorage shares. (string value) #vzstorage_shares_config = /etc/cinder/vzstorage_shares # Create volumes as sparsed files which take no space rather than regular files # when using raw format, in which case volume creation takes lot of time. # (boolean value) #vzstorage_sparsed_volumes = true # Percent of ACTUAL usage of the underlying volume before no new volumes can be # allocated to the volume destination. (floating point value) #vzstorage_used_ratio = 0.95 # Base dir containing mount points for vzstorage shares. (string value) #vzstorage_mount_point_base = $state_path/mnt # Mount options passed to the vzstorage client. See section of the pstorage- # mount man page for details. (list value) #vzstorage_mount_options = # File with the list of available nfs shares (string value) #nfs_shares_config = /etc/cinder/nfs_shares # Create volumes as sparsed files which take no space.If set to False volume is # created as regular file.In such case volume creation takes a lot of time. # (boolean value) #nfs_sparsed_volumes = true # Percent of ACTUAL usage of the underlying volume before no new volumes can be # allocated to the volume destination. Note that this option is deprecated in # favor of "reserved_percentage" and will be removed in the Mitaka release. # (floating point value) #nfs_used_ratio = 0.95 # This will compare the allocated to available space on the volume destination. # If the ratio exceeds this number, the destination will no longer be valid. # Note that this option is deprecated in favor of "max_oversubscription_ratio" # and will be removed in the Mitaka release. (floating point value) #nfs_oversub_ratio = 1.0 # Base dir containing mount points for nfs shares. (string value) #nfs_mount_point_base = $state_path/mnt # Mount options passed to the nfs client. See section of the nfs man page for # details. (string value) #nfs_mount_options = # The number of attempts to mount nfs shares before raising an error. At least # one attempt will be made to mount an nfs share, regardless of the value # specified. (integer value) #nfs_mount_attempts = 3 # # From oslo.log # # Print debugging output (set logging level to DEBUG instead of default INFO # level). (boolean value) #debug = false debug = True # If set to false, will disable INFO logging level, making WARNING the default. # (boolean value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #verbose = true verbose = True # The name of a logging configuration file. This file is appended to any # existing logging configuration files. For details about logging configuration # files, see the Python logging module documentation. (string value) # Deprecated group/name - [DEFAULT]/log_config #log_config_append = # DEPRECATED. A logging.Formatter log message format string which may use any # of the available logging.LogRecord attributes. This option is deprecated. # Please use logging_context_format_string and logging_default_format_string # instead. (string value) #log_format = # Format string for %%(asctime)s in log records. Default: %(default)s . (string # value) #log_date_format = %Y-%m-%d %H:%M:%S # (Optional) Name of log file to output to. If no default is set, logging will # go to stdout. (string value) # Deprecated group/name - [DEFAULT]/logfile #log_file = # (Optional) The base directory used for relative --log-file paths. (string # value) # Deprecated group/name - [DEFAULT]/logdir #log_dir = log_dir = /var/log/cinder # Use syslog for logging. Existing syslog format is DEPRECATED and will be # changed later to honor RFC5424. (boolean value) #use_syslog = false # (Optional) Enables or disables syslog rfc5424 format for logging. If enabled, # prefixes the MSG part of the syslog message with APP-NAME (RFC5424). The # format without the APP-NAME is deprecated in Kilo, and will be removed in # Mitaka, along with this option. (boolean value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #use_syslog_rfc_format = true # Syslog facility to receive log lines. (string value) #syslog_log_facility = LOG_USER # Log output to standard error. (boolean value) #use_stderr = true # Format string to use for log messages with context. (string value) #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s # Format string to use for log messages without context. (string value) #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s # Data to append to log format when level is DEBUG. (string value) #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d # Prefix each line of exception output with this format. (string value) #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s # List of logger=LEVEL pairs. (list value) #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN # Enables or disables publication of error events. (boolean value) #publish_errors = false # The format for an instance that is passed with the log message. (string # value) #instance_format = "[instance: %(uuid)s] " # The format for an instance UUID that is passed with the log message. (string # value) #instance_uuid_format = "[instance: %(uuid)s] " # Enables or disables fatal status of deprecations. (boolean value) #fatal_deprecations = false # # From oslo.messaging # # Size of RPC connection pool. (integer value) # Deprecated group/name - [DEFAULT]/rpc_conn_pool_size #rpc_conn_pool_size = 30 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. # The "host" option should point or resolve to this address. (string value) #rpc_zmq_bind_address = * # MatchMaker driver. (string value) #rpc_zmq_matchmaker = local # ZeroMQ receiver listening port. (integer value) #rpc_zmq_port = 9501 # Number of ZeroMQ contexts, defaults to 1. (integer value) #rpc_zmq_contexts = 1 # Maximum number of ingress messages to locally buffer per topic. Default is # unlimited. (integer value) #rpc_zmq_topic_backlog = # Directory for holding IPC sockets. (string value) #rpc_zmq_ipc_dir = /var/run/openstack # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match # "host" option, if running Nova. (string value) #rpc_zmq_host = localhost # Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. # (integer value) #rpc_cast_timeout = 30 # Heartbeat frequency. (integer value) #matchmaker_heartbeat_freq = 300 # Heartbeat time-to-live. (integer value) #matchmaker_heartbeat_ttl = 600 # Size of executor thread pool. (integer value) # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size #executor_thread_pool_size = 64 # The Drivers(s) to handle sending notifications. Possible values are # messaging, messagingv2, routing, log, test, noop (multi valued) #notification_driver = notification_driver =messagingv2 # AMQP topic used for OpenStack notifications. (list value) # Deprecated group/name - [rpc_notifier2]/topics #notification_topics = notifications # Seconds to wait for a response from a call. (integer value) #rpc_response_timeout = 60 # A URL representing the messaging driver to use and its full configuration. If # not set, we fall back to the rpc_backend option and driver specific # configuration. (string value) #transport_url = # The messaging driver to use, defaults to rabbit. Other drivers include qpid # and zmq. (string value) #rpc_backend = rabbit rpc_backend = rabbit # The default exchange under which topics are scoped. May be overridden by an # exchange name specified in the transport_url option. (string value) #control_exchange = openstack control_exchange = openstack # # From oslo.messaging # # Size of RPC connection pool. (integer value) # Deprecated group/name - [DEFAULT]/rpc_conn_pool_size #rpc_conn_pool_size = 30 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. # The "host" option should point or resolve to this address. (string value) #rpc_zmq_bind_address = * # MatchMaker driver. (string value) #rpc_zmq_matchmaker = local # ZeroMQ receiver listening port. (integer value) #rpc_zmq_port = 9501 # Number of ZeroMQ contexts, defaults to 1. (integer value) #rpc_zmq_contexts = 1 # Maximum number of ingress messages to locally buffer per topic. Default is # unlimited. (integer value) #rpc_zmq_topic_backlog = # Directory for holding IPC sockets. (string value) #rpc_zmq_ipc_dir = /var/run/openstack # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match # "host" option, if running Nova. (string value) #rpc_zmq_host = localhost # Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. # (integer value) #rpc_cast_timeout = 30 # Heartbeat frequency. (integer value) #matchmaker_heartbeat_freq = 300 # Heartbeat time-to-live. (integer value) #matchmaker_heartbeat_ttl = 600 # Size of executor thread pool. (integer value) # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size #executor_thread_pool_size = 64 # The Drivers(s) to handle sending notifications. Possible values are # messaging, messagingv2, routing, log, test, noop (multi valued) #notification_driver = # AMQP topic used for OpenStack notifications. (list value) # Deprecated group/name - [rpc_notifier2]/topics #notification_topics = notifications # Seconds to wait for a response from a call. (integer value) #rpc_response_timeout = 60 # A URL representing the messaging driver to use and its full configuration. If # not set, we fall back to the rpc_backend option and driver specific # configuration. (string value) #transport_url = # The messaging driver to use, defaults to rabbit. Other drivers include qpid # and zmq. (string value) #rpc_backend = rabbit # The default exchange under which topics are scoped. May be overridden by an # exchange name specified in the transport_url option. (string value) #control_exchange = openstack api_paste_config=/etc/cinder/api-paste.ini [BRCD_FABRIC_EXAMPLE] # # From cinder # # Management IP of fabric (string value) #fc_fabric_address = # Fabric user ID (string value) #fc_fabric_user = # Password for user (string value) #fc_fabric_password = # Connecting port (integer value) # Minimum value: 1 # Maximum value: 65535 #fc_fabric_port = 22 # overridden zoning policy (string value) #zoning_policy = initiator-target # overridden zoning activation state (boolean value) #zone_activate = true # overridden zone name prefix (string value) #zone_name_prefix = # Principal switch WWN of the fabric (string value) #principal_switch_wwn = [CISCO_FABRIC_EXAMPLE] # # From cinder # # Management IP of fabric (string value) #cisco_fc_fabric_address = # Fabric user ID (string value) #cisco_fc_fabric_user = # Password for user (string value) #cisco_fc_fabric_password = # Connecting port (integer value) # Minimum value: 1 # Maximum value: 65535 #cisco_fc_fabric_port = 22 # overridden zoning policy (string value) #cisco_zoning_policy = initiator-target # overridden zoning activation state (boolean value) #cisco_zone_activate = true # overridden zone name prefix (string value) #cisco_zone_name_prefix = # VSAN of the Fabric (string value) #cisco_zoning_vsan = [cors] # # From oslo.middleware # # Indicate whether this resource may be shared with the domain received in the # requests "origin" header. (string value) #allowed_origin = # Indicate that the actual request can include user credentials (boolean value) #allow_credentials = true # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple # Headers. (list value) #expose_headers = Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma # Maximum cache age of CORS preflight requests. (integer value) #max_age = 3600 # Indicate which methods can be used during the actual request. (list value) #allow_methods = GET,POST,PUT,DELETE,OPTIONS # Indicate which header field names may be used during the actual request. # (list value) #allow_headers = Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma [cors.subdomain] # # From oslo.middleware # # Indicate whether this resource may be shared with the domain received in the # requests "origin" header. (string value) #allowed_origin = # Indicate that the actual request can include user credentials (boolean value) #allow_credentials = true # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple # Headers. (list value) #expose_headers = Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma # Maximum cache age of CORS preflight requests. (integer value) #max_age = 3600 # Indicate which methods can be used during the actual request. (list value) #allow_methods = GET,POST,PUT,DELETE,OPTIONS # Indicate which header field names may be used during the actual request. # (list value) #allow_headers = Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma [database] # # From oslo.db # # The file name to use with SQLite. (string value) # Deprecated group/name - [DEFAULT]/sqlite_db #sqlite_db = oslo.sqlite # If True, SQLite uses synchronous mode. (boolean value) # Deprecated group/name - [DEFAULT]/sqlite_synchronous #sqlite_synchronous = true # The back end to use for the database. (string value) # Deprecated group/name - [DEFAULT]/db_backend #backend = sqlalchemy # The SQLAlchemy connection string to use to connect to the database. (string # value) # Deprecated group/name - [DEFAULT]/sql_connection # Deprecated group/name - [DATABASE]/sql_connection # Deprecated group/name - [sql]/connection #connection = connection = mysql+pymysql://cinder:qum5net@VARINET4ADDR/cinder # The SQLAlchemy connection string to use to connect to the slave database. # (string value) #slave_connection = # The SQL mode to be used for MySQL sessions. This option, including the # default, overrides any server-set SQL mode. To use whatever SQL mode is set # by the server configuration, set this to no value. Example: mysql_sql_mode= # (string value) #mysql_sql_mode = TRADITIONAL # Timeout before idle SQL connections are reaped. (integer value) # Deprecated group/name - [DEFAULT]/sql_idle_timeout # Deprecated group/name - [DATABASE]/sql_idle_timeout # Deprecated group/name - [sql]/idle_timeout #idle_timeout = 3600 # Minimum number of SQL connections to keep open in a pool. (integer value) # Deprecated group/name - [DEFAULT]/sql_min_pool_size # Deprecated group/name - [DATABASE]/sql_min_pool_size #min_pool_size = 1 # Maximum number of SQL connections to keep open in a pool. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_pool_size # Deprecated group/name - [DATABASE]/sql_max_pool_size #max_pool_size = # Maximum number of database connection retries during startup. Set to -1 to # specify an infinite retry count. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_retries # Deprecated group/name - [DATABASE]/sql_max_retries #max_retries = 10 # Interval between retries of opening a SQL connection. (integer value) # Deprecated group/name - [DEFAULT]/sql_retry_interval # Deprecated group/name - [DATABASE]/reconnect_interval #retry_interval = 10 # If set, use this value for max_overflow with SQLAlchemy. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_overflow # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow #max_overflow = # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer # value) # Deprecated group/name - [DEFAULT]/sql_connection_debug #connection_debug = 0 # Add Python stack traces to SQL as comment strings. (boolean value) # Deprecated group/name - [DEFAULT]/sql_connection_trace #connection_trace = false # If set, use this value for pool_timeout with SQLAlchemy. (integer value) # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout #pool_timeout = # Enable the experimental use of database reconnect on connection lost. # (boolean value) #use_db_reconnect = false # Seconds between retries of a database transaction. (integer value) #db_retry_interval = 1 # If True, increases the interval between retries of a database operation up to # db_max_retry_interval. (boolean value) #db_inc_retry_interval = true # If db_inc_retry_interval is set, the maximum seconds between retries of a # database operation. (integer value) #db_max_retry_interval = 10 # Maximum retries in case of connection error or deadlock error before error is # raised. Set to -1 to specify an infinite retry count. (integer value) #db_max_retries = 20 [fc-zone-manager] # # From cinder # # FC Zone Driver responsible for zone management (string value) #zone_driver = cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver # Zoning policy configured by user; valid values include "initiator-target" or # "initiator" (string value) #zoning_policy = initiator-target # Comma separated list of Fibre Channel fabric names. This list of names is # used to retrieve other SAN credentials for connecting to each SAN fabric # (string value) #fc_fabric_names = # FC SAN Lookup Service (string value) #fc_san_lookup_service = cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService # Southbound connector for zoning operation (string value) #brcd_sb_connector = cinder.zonemanager.drivers.brocade.brcd_fc_zone_client_cli.BrcdFCZoneClientCLI # Southbound connector for zoning operation (string value) #cisco_sb_connector = cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI [keymgr] # # From cinder # # Authentication url for encryption service. (string value) #encryption_auth_url = http://localhost:5000/v3 # Url for encryption service. (string value) #encryption_api_url = http://localhost:9311/v1 # The full class name of the key manager API class (string value) #api_class = cinder.keymgr.conf_key_mgr.ConfKeyManager # Fixed key returned by key manager, specified in hex (string value) #fixed_key = [keystone_authtoken] # # From keystonemiddleware.auth_token # # Complete public Identity API endpoint. (string value) #auth_uri = auth_uri = http://VARINET4ADDR:5000/v2.0 # API version of the admin Identity API endpoint. (string value) #auth_version = # Do not handle authorization requests within the middleware, but delegate the # authorization decision to downstream WSGI components. (boolean value) #delay_auth_decision = false # Request timeout value for communicating with Identity API server. (integer # value) #http_connect_timeout = # How many times are we trying to reconnect when communicating with Identity # API Server. (integer value) #http_request_max_retries = 3 # Env key for the swift cache. (string value) #cache = # Required if identity server requires client certificate (string value) #certfile = # Required if identity server requires client certificate (string value) #keyfile = # A PEM encoded Certificate Authority to use when verifying HTTPs connections. # Defaults to system CAs. (string value) #cafile = # Verify HTTPS connections. (boolean value) #insecure = false # The region in which the identity server can be found. (string value) #region_name = # Directory used to cache files related to PKI tokens. (string value) #signing_dir = # Optionally specify a list of memcached server(s) to use for caching. If left # undefined, tokens will instead be cached in-process. (list value) # Deprecated group/name - [DEFAULT]/memcache_servers #memcached_servers = # In order to prevent excessive effort spent validating tokens, the middleware # caches previously-seen tokens for a configurable duration (in seconds). Set # to -1 to disable caching completely. (integer value) #token_cache_time = 300 # Determines the frequency at which the list of revoked tokens is retrieved # from the Identity service (in seconds). A high number of revocation events # combined with a low cache duration may significantly reduce performance. # (integer value) #revocation_cache_time = 10 # (Optional) If defined, indicate whether token data should be authenticated or # authenticated and encrypted. Acceptable values are MAC or ENCRYPT. If MAC, # token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data # is encrypted and authenticated in the cache. If the value is not one of these # options or empty, auth_token will raise an exception on initialization. # (string value) #memcache_security_strategy = # (Optional, mandatory if memcache_security_strategy is defined) This string is # used for key derivation. (string value) #memcache_secret_key = # (Optional) Number of seconds memcached server is considered dead before it is # tried again. (integer value) #memcache_pool_dead_retry = 300 # (Optional) Maximum total number of open connections to every memcached # server. (integer value) #memcache_pool_maxsize = 10 # (Optional) Socket timeout in seconds for communicating with a memcached # server. (integer value) #memcache_pool_socket_timeout = 3 # (Optional) Number of seconds a connection to memcached is held unused in the # pool before it is closed. (integer value) #memcache_pool_unused_timeout = 60 # (Optional) Number of seconds that an operation will wait to get a memcached # client connection from the pool. (integer value) #memcache_pool_conn_get_timeout = 10 # (Optional) Use the advanced (eventlet safe) memcached client pool. The # advanced pool will only work under python 2.x. (boolean value) #memcache_use_advanced_pool = false # (Optional) Indicate whether to set the X-Service-Catalog header. If False, # middleware will not ask for service catalog on token validation and will not # set the X-Service-Catalog header. (boolean value) #include_service_catalog = true # Used to control the use and type of token binding. Can be set to: "disabled" # to not check token binding. "permissive" (default) to validate binding # information if the bind type is of a form known to the server and ignore it # if not. "strict" like "permissive" but if the bind type is unknown the token # will be rejected. "required" any form of token binding is needed to be # allowed. Finally the name of a binding method that must be present in tokens. # (string value) #enforce_token_bind = permissive # If true, the revocation list will be checked for cached tokens. This requires # that PKI tokens are configured on the identity server. (boolean value) #check_revocations_for_cached = false # Hash algorithms to use for hashing PKI tokens. This may be a single algorithm # or multiple. The algorithms are those supported by Python standard # hashlib.new(). The hashes will be tried in the order given, so put the # preferred one first for performance. The result of the first hash will be # stored in the cache. This will typically be set to multiple values only while # migrating from a less secure algorithm to a more secure one. Once all the old # tokens are expired this option should be set to a single value for better # performance. (list value) #hash_algorithms = md5 # Prefix to prepend at the beginning of the path. Deprecated, use identity_uri. # (string value) #auth_admin_prefix = # Host providing the admin Identity API endpoint. Deprecated, use identity_uri. # (string value) #auth_host = 127.0.0.1 # Port of the admin Identity API endpoint. Deprecated, use identity_uri. # (integer value) #auth_port = 35357 # Protocol of the admin Identity API endpoint (http or https). Deprecated, use # identity_uri. (string value) #auth_protocol = https # Complete admin Identity API endpoint. This should specify the unversioned # root endpoint e.g. https://localhost:35357/ (string value) #identity_uri = identity_uri = http://VARINET4ADDR:35357 # This option is deprecated and may be removed in a future release. Single # shared secret with the Keystone configuration used for bootstrapping a # Keystone installation, or otherwise bypassing the normal authentication # process. This option should not be used, use `admin_user` and # `admin_password` instead. (string value) #admin_token = # Service username. (string value) #admin_user = admin_user = cinder # Service user password. (string value) #admin_password = admin_password = qum5net # Service tenant name. (string value) #admin_tenant_name = admin admin_tenant_name = services [matchmaker_redis] # # From oslo.messaging # # Host to locate redis. (string value) #host = 127.0.0.1 # Use this port to connect to redis host. (integer value) #port = 6379 # Password for Redis server (optional). (string value) #password = # # From oslo.messaging # # Host to locate redis. (string value) #host = 127.0.0.1 # Use this port to connect to redis host. (integer value) #port = 6379 # Password for Redis server (optional). (string value) #password = [matchmaker_ring] # # From oslo.messaging # # Matchmaker ring file (JSON). (string value) # Deprecated group/name - [DEFAULT]/matchmaker_ringfile #ringfile = /etc/oslo/matchmaker_ring.json # # From oslo.messaging # # Matchmaker ring file (JSON). (string value) # Deprecated group/name - [DEFAULT]/matchmaker_ringfile #ringfile = /etc/oslo/matchmaker_ring.json [oslo_concurrency] # # From oslo.concurrency # # Enables or disables inter-process locks. (boolean value) # Deprecated group/name - [DEFAULT]/disable_process_locking #disable_process_locking = false # Directory to use for lock files. For security, the specified directory # should only be writable by the user running the processes that need locking. # Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, # a lock path must be set. (string value) # Deprecated group/name - [DEFAULT]/lock_path #lock_path = [oslo_messaging_amqp] # # From oslo.messaging # # address prefix used when sending to a specific server (string value) # Deprecated group/name - [amqp1]/server_request_prefix #server_request_prefix = exclusive # address prefix used when broadcasting to all servers (string value) # Deprecated group/name - [amqp1]/broadcast_prefix #broadcast_prefix = broadcast # address prefix when sending to any server in group (string value) # Deprecated group/name - [amqp1]/group_request_prefix #group_request_prefix = unicast # Name for the AMQP container (string value) # Deprecated group/name - [amqp1]/container_name #container_name = # Timeout for inactive connections (in seconds) (integer value) # Deprecated group/name - [amqp1]/idle_timeout #idle_timeout = 0 # Debug: dump AMQP frames to stdout (boolean value) # Deprecated group/name - [amqp1]/trace #trace = false # CA certificate PEM file to verify server certificate (string value) # Deprecated group/name - [amqp1]/ssl_ca_file #ssl_ca_file = # Identifying certificate PEM file to present to clients (string value) # Deprecated group/name - [amqp1]/ssl_cert_file #ssl_cert_file = # Private key PEM file used to sign cert_file certificate (string value) # Deprecated group/name - [amqp1]/ssl_key_file #ssl_key_file = # Password for decrypting ssl_key_file (if encrypted) (string value) # Deprecated group/name - [amqp1]/ssl_key_password #ssl_key_password = # Accept clients using either SSL or plain TCP (boolean value) # Deprecated group/name - [amqp1]/allow_insecure_clients #allow_insecure_clients = false # # From oslo.messaging # # address prefix used when sending to a specific server (string value) # Deprecated group/name - [amqp1]/server_request_prefix #server_request_prefix = exclusive # address prefix used when broadcasting to all servers (string value) # Deprecated group/name - [amqp1]/broadcast_prefix #broadcast_prefix = broadcast # address prefix when sending to any server in group (string value) # Deprecated group/name - [amqp1]/group_request_prefix #group_request_prefix = unicast # Name for the AMQP container (string value) # Deprecated group/name - [amqp1]/container_name #container_name = # Timeout for inactive connections (in seconds) (integer value) # Deprecated group/name - [amqp1]/idle_timeout #idle_timeout = 0 # Debug: dump AMQP frames to stdout (boolean value) # Deprecated group/name - [amqp1]/trace #trace = false # CA certificate PEM file to verify server certificate (string value) # Deprecated group/name - [amqp1]/ssl_ca_file #ssl_ca_file = # Identifying certificate PEM file to present to clients (string value) # Deprecated group/name - [amqp1]/ssl_cert_file #ssl_cert_file = # Private key PEM file used to sign cert_file certificate (string value) # Deprecated group/name - [amqp1]/ssl_key_file #ssl_key_file = # Password for decrypting ssl_key_file (if encrypted) (string value) # Deprecated group/name - [amqp1]/ssl_key_password #ssl_key_password = # Accept clients using either SSL or plain TCP (boolean value) # Deprecated group/name - [amqp1]/allow_insecure_clients #allow_insecure_clients = false [oslo_messaging_qpid] # # From oslo.messaging # # Use durable queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_durable_queues # Deprecated group/name - [DEFAULT]/rabbit_durable_queues #amqp_durable_queues = false # Auto-delete queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_auto_delete #amqp_auto_delete = false # Send a single AMQP reply to call message. The current behaviour since oslo- # incubator is to send two AMQP replies - first one with the payload, a second # one to ensure the other have finish to send the payload. We are going to # remove it in the N release, but we must keep backward compatible at the same # time. This option provides such compatibility - it defaults to False in # Liberty and can be turned on for early adopters with a new installations or # for testing. Please note, that this option will be removed in the Mitaka # release. (boolean value) #send_single_reply = false # Qpid broker hostname. (string value) # Deprecated group/name - [DEFAULT]/qpid_hostname #qpid_hostname = localhost # Qpid broker port. (integer value) # Deprecated group/name - [DEFAULT]/qpid_port #qpid_port = 5672 # Qpid HA cluster host:port pairs. (list value) # Deprecated group/name - [DEFAULT]/qpid_hosts #qpid_hosts = $qpid_hostname:$qpid_port # Username for Qpid connection. (string value) # Deprecated group/name - [DEFAULT]/qpid_username #qpid_username = # Password for Qpid connection. (string value) # Deprecated group/name - [DEFAULT]/qpid_password #qpid_password = # Space separated list of SASL mechanisms to use for auth. (string value) # Deprecated group/name - [DEFAULT]/qpid_sasl_mechanisms #qpid_sasl_mechanisms = # Seconds between connection keepalive heartbeats. (integer value) # Deprecated group/name - [DEFAULT]/qpid_heartbeat #qpid_heartbeat = 60 # Transport to use, either 'tcp' or 'ssl'. (string value) # Deprecated group/name - [DEFAULT]/qpid_protocol #qpid_protocol = tcp # Whether to disable the Nagle algorithm. (boolean value) # Deprecated group/name - [DEFAULT]/qpid_tcp_nodelay #qpid_tcp_nodelay = true # The number of prefetched messages held by receiver. (integer value) # Deprecated group/name - [DEFAULT]/qpid_receiver_capacity #qpid_receiver_capacity = 1 # The qpid topology version to use. Version 1 is what was originally used by # impl_qpid. Version 2 includes some backwards-incompatible changes that allow # broker federation to work. Users should update to version 2 when they are # able to take everything down, as it requires a clean break. (integer value) # Deprecated group/name - [DEFAULT]/qpid_topology_version #qpid_topology_version = 1 # # From oslo.messaging # # Use durable queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_durable_queues # Deprecated group/name - [DEFAULT]/rabbit_durable_queues #amqp_durable_queues = false # Auto-delete queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_auto_delete #amqp_auto_delete = false # Send a single AMQP reply to call message. The current behaviour since oslo- # incubator is to send two AMQP replies - first one with the payload, a second # one to ensure the other have finish to send the payload. We are going to # remove it in the N release, but we must keep backward compatible at the same # time. This option provides such compatibility - it defaults to False in # Liberty and can be turned on for early adopters with a new installations or # for testing. Please note, that this option will be removed in the Mitaka # release. (boolean value) #send_single_reply = false # Qpid broker hostname. (string value) # Deprecated group/name - [DEFAULT]/qpid_hostname #qpid_hostname = localhost # Qpid broker port. (integer value) # Deprecated group/name - [DEFAULT]/qpid_port #qpid_port = 5672 # Qpid HA cluster host:port pairs. (list value) # Deprecated group/name - [DEFAULT]/qpid_hosts #qpid_hosts = $qpid_hostname:$qpid_port # Username for Qpid connection. (string value) # Deprecated group/name - [DEFAULT]/qpid_username #qpid_username = # Password for Qpid connection. (string value) # Deprecated group/name - [DEFAULT]/qpid_password #qpid_password = # Space separated list of SASL mechanisms to use for auth. (string value) # Deprecated group/name - [DEFAULT]/qpid_sasl_mechanisms #qpid_sasl_mechanisms = # Seconds between connection keepalive heartbeats. (integer value) # Deprecated group/name - [DEFAULT]/qpid_heartbeat #qpid_heartbeat = 60 # Transport to use, either 'tcp' or 'ssl'. (string value) # Deprecated group/name - [DEFAULT]/qpid_protocol #qpid_protocol = tcp # Whether to disable the Nagle algorithm. (boolean value) # Deprecated group/name - [DEFAULT]/qpid_tcp_nodelay #qpid_tcp_nodelay = true # The number of prefetched messages held by receiver. (integer value) # Deprecated group/name - [DEFAULT]/qpid_receiver_capacity #qpid_receiver_capacity = 1 # The qpid topology version to use. Version 1 is what was originally used by # impl_qpid. Version 2 includes some backwards-incompatible changes that allow # broker federation to work. Users should update to version 2 when they are # able to take everything down, as it requires a clean break. (integer value) # Deprecated group/name - [DEFAULT]/qpid_topology_version #qpid_topology_version = 1 [oslo_messaging_rabbit] # # From oslo.messaging # # Use durable queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_durable_queues # Deprecated group/name - [DEFAULT]/rabbit_durable_queues #amqp_durable_queues = false amqp_durable_queues = False # Auto-delete queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_auto_delete #amqp_auto_delete = false # Send a single AMQP reply to call message. The current behaviour since oslo- # incubator is to send two AMQP replies - first one with the payload, a second # one to ensure the other have finish to send the payload. We are going to # remove it in the N release, but we must keep backward compatible at the same # time. This option provides such compatibility - it defaults to False in # Liberty and can be turned on for early adopters with a new installations or # for testing. Please note, that this option will be removed in the Mitaka # release. (boolean value) #send_single_reply = false # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some # distributions. (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_version #kombu_ssl_version = # SSL key file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile #kombu_ssl_keyfile = kombu_ssl_keyfile = # SSL cert file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_certfile #kombu_ssl_certfile = kombu_ssl_certfile = # SSL certification authority file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs #kombu_ssl_ca_certs = kombu_ssl_ca_certs = # How long to wait before reconnecting in response to an AMQP consumer cancel # notification. (floating point value) # Deprecated group/name - [DEFAULT]/kombu_reconnect_delay #kombu_reconnect_delay = 1.0 # How long to wait before considering a reconnect attempt to have failed. This # value should not be longer than rpc_response_timeout. (integer value) #kombu_reconnect_timeout = 60 # The RabbitMQ broker address where a single node is used. (string value) # Deprecated group/name - [DEFAULT]/rabbit_host #rabbit_host = localhost rabbit_host = VARINET4ADDR # The RabbitMQ broker port where a single node is used. (integer value) # Deprecated group/name - [DEFAULT]/rabbit_port #rabbit_port = 5672 rabbit_port = 5672 # RabbitMQ HA cluster host:port pairs. (list value) # Deprecated group/name - [DEFAULT]/rabbit_hosts #rabbit_hosts = $rabbit_host:$rabbit_port rabbit_hosts = VARINET4ADDR:5672 # Connect over SSL for RabbitMQ. (boolean value) # Deprecated group/name - [DEFAULT]/rabbit_use_ssl #rabbit_use_ssl = false rabbit_use_ssl = False # The RabbitMQ userid. (string value) # Deprecated group/name - [DEFAULT]/rabbit_userid #rabbit_userid = guest rabbit_userid = guest # The RabbitMQ password. (string value) # Deprecated group/name - [DEFAULT]/rabbit_password #rabbit_password = guest rabbit_password = guest # The RabbitMQ login method. (string value) # Deprecated group/name - [DEFAULT]/rabbit_login_method #rabbit_login_method = AMQPLAIN # The RabbitMQ virtual host. (string value) # Deprecated group/name - [DEFAULT]/rabbit_virtual_host #rabbit_virtual_host = / rabbit_virtual_host = / # How frequently to retry connecting with RabbitMQ. (integer value) #rabbit_retry_interval = 1 # How long to backoff for between retries when connecting to RabbitMQ. (integer # value) # Deprecated group/name - [DEFAULT]/rabbit_retry_backoff #rabbit_retry_backoff = 2 # Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry # count). (integer value) # Deprecated group/name - [DEFAULT]/rabbit_max_retries #rabbit_max_retries = 0 # Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you # must wipe the RabbitMQ database. (boolean value) # Deprecated group/name - [DEFAULT]/rabbit_ha_queues #rabbit_ha_queues = false rabbit_ha_queues = False # Specifies the number of messages to prefetch. Setting to zero allows # unlimited messages. (integer value) #rabbit_qos_prefetch_count = 0 # Number of seconds after which the Rabbit broker is considered down if # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer # value) #heartbeat_timeout_threshold = 60 heartbeat_timeout_threshold = 0 # How often times during the heartbeat_timeout_threshold we check the # heartbeat. (integer value) #heartbeat_rate = 2 heartbeat_rate = 2 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value) # Deprecated group/name - [DEFAULT]/fake_rabbit #fake_rabbit = false # # From oslo.messaging # # Use durable queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_durable_queues # Deprecated group/name - [DEFAULT]/rabbit_durable_queues #amqp_durable_queues = false # Auto-delete queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_auto_delete #amqp_auto_delete = false # Send a single AMQP reply to call message. The current behaviour since oslo- # incubator is to send two AMQP replies - first one with the payload, a second # one to ensure the other have finish to send the payload. We are going to # remove it in the N release, but we must keep backward compatible at the same # time. This option provides such compatibility - it defaults to False in # Liberty and can be turned on for early adopters with a new installations or # for testing. Please note, that this option will be removed in the Mitaka # release. (boolean value) #send_single_reply = false # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some # distributions. (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_version #kombu_ssl_version = # SSL key file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile #kombu_ssl_keyfile = # SSL cert file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_certfile #kombu_ssl_certfile = # SSL certification authority file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs #kombu_ssl_ca_certs = # How long to wait before reconnecting in response to an AMQP consumer cancel # notification. (floating point value) # Deprecated group/name - [DEFAULT]/kombu_reconnect_delay #kombu_reconnect_delay = 1.0 # How long to wait before considering a reconnect attempt to have failed. This # value should not be longer than rpc_response_timeout. (integer value) #kombu_reconnect_timeout = 60 # The RabbitMQ broker address where a single node is used. (string value) # Deprecated group/name - [DEFAULT]/rabbit_host #rabbit_host = localhost # The RabbitMQ broker port where a single node is used. (integer value) # Deprecated group/name - [DEFAULT]/rabbit_port #rabbit_port = 5672 # RabbitMQ HA cluster host:port pairs. (list value) # Deprecated group/name - [DEFAULT]/rabbit_hosts #rabbit_hosts = $rabbit_host:$rabbit_port # Connect over SSL for RabbitMQ. (boolean value) # Deprecated group/name - [DEFAULT]/rabbit_use_ssl #rabbit_use_ssl = false # The RabbitMQ userid. (string value) # Deprecated group/name - [DEFAULT]/rabbit_userid #rabbit_userid = guest # The RabbitMQ password. (string value) # Deprecated group/name - [DEFAULT]/rabbit_password #rabbit_password = guest # The RabbitMQ login method. (string value) # Deprecated group/name - [DEFAULT]/rabbit_login_method #rabbit_login_method = AMQPLAIN # The RabbitMQ virtual host. (string value) # Deprecated group/name - [DEFAULT]/rabbit_virtual_host #rabbit_virtual_host = / # How frequently to retry connecting with RabbitMQ. (integer value) #rabbit_retry_interval = 1 # How long to backoff for between retries when connecting to RabbitMQ. (integer # value) # Deprecated group/name - [DEFAULT]/rabbit_retry_backoff #rabbit_retry_backoff = 2 # Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry # count). (integer value) # Deprecated group/name - [DEFAULT]/rabbit_max_retries #rabbit_max_retries = 0 # Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you # must wipe the RabbitMQ database. (boolean value) # Deprecated group/name - [DEFAULT]/rabbit_ha_queues #rabbit_ha_queues = false # Specifies the number of messages to prefetch. Setting to zero allows # unlimited messages. (integer value) #rabbit_qos_prefetch_count = 0 # Number of seconds after which the Rabbit broker is considered down if # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer # value) #heartbeat_timeout_threshold = 60 # How often times during the heartbeat_timeout_threshold we check the # heartbeat. (integer value) #heartbeat_rate = 2 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value) # Deprecated group/name - [DEFAULT]/fake_rabbit #fake_rabbit = false [oslo_middleware] # # From oslo.middleware # # The maximum body size for each request, in bytes. (integer value) # Deprecated group/name - [DEFAULT]/osapi_max_request_body_size # Deprecated group/name - [DEFAULT]/max_request_body_size #max_request_body_size = 114688 # # From oslo.middleware # # The HTTP Header that will be used to determine what the original request # protocol scheme was, even if it was hidden by an SSL termination proxy. # (string value) #secure_proxy_ssl_header = X-Forwarded-Proto [oslo_policy] # # From oslo.policy # # The JSON file that defines policies. (string value) # Deprecated group/name - [DEFAULT]/policy_file #policy_file = policy.json # Default rule. Enforced when a requested rule is not found. (string value) # Deprecated group/name - [DEFAULT]/policy_default_rule #policy_default_rule = default # Directories where policy configuration files are stored. They can be relative # to any directory in the search path defined by the config_dir option, or # absolute paths. The file defined by policy_file must exist for these # directories to be searched. Missing or empty directories are ignored. (multi # valued) # Deprecated group/name - [DEFAULT]/policy_dirs # This option is deprecated for removal. # Its value may be silently ignored in the future. #policy_dirs = policy.d [oslo_reports] # # From oslo.reports # # Path to a log directory where to create a file (string value) #log_dir = [profiler] # # From cinder # # If False fully disable profiling feature. (boolean value) #profiler_enabled = false # If False doesn't trace SQL requests. (boolean value) #trace_sqlalchemy = false [lvm] iscsi_helper=lioadm volume_group=cinder-volumes iscsi_ip_address=VARINET4ADDR volume_driver=cinder.volume.drivers.lvm.LVMVolumeDriver volumes_dir=/var/lib/cinder/volumes iscsi_protocol=iscsi volume_backend_name=lvm [ceph] volume_driver = cinder.volume.drivers.rbd.RBDDriver rbd_pool = volumes rbd_ceph_conf = /etc/ceph/ceph.conf rbd_flatten_volume_from_snapshot = false rbd_max_clone_depth = 5 rbd_store_chunk_size = 4 rados_connect_timeout = -1 glance_api_version = 2 rbd_user=cinder rbd_secret_uuid=RBDSECRET