X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?p=kvmfornfv.git;a=blobdiff_plain;f=kernel%2Fdrivers%2Ftty%2Fserial%2Fsn_console.c;h=d4692d888e9da84dd730721dcb949403ccc957e5;hp=33e94e56dcdb085aef32e290222ac9d0f200c689;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hpb=f93b97fd65072de626c074dbe099a1fff05ce060

diff --git a/kernel/drivers/tty/serial/sn_console.c b/kernel/drivers/tty/serial/sn_console.c
index 33e94e56d..d4692d888 100644
--- a/kernel/drivers/tty/serial/sn_console.c
+++ b/kernel/drivers/tty/serial/sn_console.c
@@ -42,7 +42,7 @@
 #include <linux/tty_flip.h>
 #include <linux/serial.h>
 #include <linux/console.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/sysrq.h>
 #include <linux/circ_buf.h>
 #include <linux/serial_reg.h>
@@ -659,7 +659,7 @@ static void sn_sal_timer_poll(unsigned long data)
  * @port: Our sn_cons_port (which contains the uart port)
  *
  * So this is used by sn_sal_serial_console_init (early on, before we're
- * registered with serial core).  It's also used by sn_sal_module_init
+ * registered with serial core).  It's also used by sn_sal_init
  * right after we've registered with serial core.  The later only happens
  * if we didn't already come through here via sn_sal_serial_console_init.
  *
@@ -709,7 +709,7 @@ static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port)
  * sn_sal_switch_to_interrupts - Switch to interrupt driven mode
  * @port: Our sn_cons_port (which contains the uart port)
  *
- * In sn_sal_module_init, after we're registered with serial core and
+ * In sn_sal_init, after we're registered with serial core and
  * the port is added, this function is called to switch us to interrupt
  * mode.  We were previously in asynch/polling mode (using init_timer).
  *
@@ -773,7 +773,7 @@ static struct uart_driver sal_console_uart = {
 };
 
 /**
- * sn_sal_module_init - When the kernel loads us, get us rolling w/ serial core
+ * sn_sal_init - When the kernel loads us, get us rolling w/ serial core
  *
  * Before this is called, we've been printing kernel messages in a special
  * early mode not making use of the serial core infrastructure.  When our
@@ -781,7 +781,7 @@ static struct uart_driver sal_console_uart = {
  * core and try to enable interrupt driven mode.
  *
  */
-static int __init sn_sal_module_init(void)
+static int __init sn_sal_init(void)
 {
 	int retval;
 
@@ -811,7 +811,7 @@ static int __init sn_sal_module_init(void)
 
 	if (uart_register_driver(&sal_console_uart) < 0) {
 		printk
-		    ("ERROR sn_sal_module_init failed uart_register_driver, line %d\n",
+		    ("ERROR sn_sal_init failed uart_register_driver, line %d\n",
 		     __LINE__);
 		return -ENODEV;
 	}
@@ -832,33 +832,19 @@ static int __init sn_sal_module_init(void)
 
 	/* when this driver is compiled in, the console initialization
 	 * will have already switched us into asynchronous operation
-	 * before we get here through the module initcalls */
+	 * before we get here through the initcalls */
 	if (!sal_console_port.sc_is_asynch) {
 		sn_sal_switch_to_asynch(&sal_console_port);
 	}
 
-	/* at this point (module_init) we can try to turn on interrupts */
+	/* at this point (device_init) we can try to turn on interrupts */
 	if (!IS_RUNNING_ON_SIMULATOR()) {
 		sn_sal_switch_to_interrupts(&sal_console_port);
 	}
 	sn_process_input = 1;
 	return 0;
 }
-
-/**
- * sn_sal_module_exit - When we're unloaded, remove the driver/port
- *
- */
-static void __exit sn_sal_module_exit(void)
-{
-	del_timer_sync(&sal_console_port.sc_timer);
-	uart_remove_one_port(&sal_console_uart, &sal_console_port.sc_port);
-	uart_unregister_driver(&sal_console_uart);
-	misc_deregister(&misc);
-}
-
-module_init(sn_sal_module_init);
-module_exit(sn_sal_module_exit);
+device_initcall(sn_sal_init);
 
 /**
  * puts_raw_fixed - sn_sal_console_write helper for adding \r's as required