X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?p=kvmfornfv.git;a=blobdiff_plain;f=kernel%2Fdrivers%2Fspi%2FKconfig;h=8b9c2a38d1ccd8ae00d9f2642026438d349c8be1;hp=72b059081559356100aa68dea2c021b056b492e5;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hpb=f93b97fd65072de626c074dbe099a1fff05ce060

diff --git a/kernel/drivers/spi/Kconfig b/kernel/drivers/spi/Kconfig
index 72b059081..8b9c2a38d 100644
--- a/kernel/drivers/spi/Kconfig
+++ b/kernel/drivers/spi/Kconfig
@@ -77,6 +77,7 @@ config SPI_ATMEL
 
 config SPI_BCM2835
 	tristate "BCM2835 SPI controller"
+	depends on GPIOLIB
 	depends on ARCH_BCM2835 || COMPILE_TEST
 	depends on GPIOLIB
 	help
@@ -87,6 +88,17 @@ config SPI_BCM2835
 	  is for the regular SPI controller. Slave mode operation is not also
 	  not supported.
 
+config SPI_BCM2835AUX
+	tristate "BCM2835 SPI auxiliary controller"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on GPIOLIB
+	help
+	  This selects a driver for the Broadcom BCM2835 SPI aux master.
+
+	  The BCM2835 contains two types of SPI master controller; the
+	  "universal SPI master", and the regular SPI controller.
+	  This driver is for the universal/auxiliary SPI controller.
+
 config SPI_BFIN5XX
 	tristate "SPI controller driver for ADI Blackfin5xx"
 	depends on BLACKFIN && !BF60x
@@ -124,7 +136,7 @@ config SPI_BCM53XX
 
 config SPI_BCM63XX
 	tristate "Broadcom BCM63xx SPI controller"
-	depends on BCM63XX
+	depends on BCM63XX || COMPILE_TEST
 	help
           Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
 
@@ -221,7 +233,7 @@ config SPI_FALCON
 
 config SPI_GPIO
 	tristate "GPIO-based bitbanging SPI Master"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	select SPI_BITBANG
 	help
 	  This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
@@ -303,7 +315,7 @@ config SPI_FSL_SPI
 config SPI_FSL_DSPI
 	tristate "Freescale DSPI controller"
 	select REGMAP_MMIO
-	depends on SOC_VF610 || SOC_LS1021A || COMPILE_TEST
+	depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
 	help
 	  This enables support for the Freescale DSPI controller in master
 	  mode. VF610 platform uses the controller.
@@ -325,9 +337,18 @@ config SPI_MESON_SPIFC
 	  This enables master mode support for the SPIFC (SPI flash
 	  controller) available in Amlogic Meson SoCs.
 
+config SPI_MT65XX
+	tristate "MediaTek SPI controller"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	help
+	  This selects the MediaTek(R) SPI bus driver.
+	  If you want to use MediaTek(R) SPI interface,
+	  say Y or M here.If you are not sure, say N.
+	  SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs.
+
 config SPI_OC_TINY
 	tristate "OpenCores tiny SPI"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	select SPI_BITBANG
 	help
 	  This is the driver for OpenCores tiny SPI master controller.
@@ -394,16 +415,9 @@ config SPI_PPC4xx
 	help
 	  This selects a driver for the PPC4xx SPI Controller.
 
-config SPI_PXA2XX_PXADMA
-	bool "PXA2xx SSP legacy PXA DMA API support"
-	depends on SPI_PXA2XX && ARCH_PXA
-	help
-	  Enable PXA private legacy DMA API support. Note that this is
-	  deprecated in favor of generic DMA engine API.
-
 config SPI_PXA2XX_DMA
 	def_bool y
-	depends on SPI_PXA2XX && !SPI_PXA2XX_PXADMA
+	depends on SPI_PXA2XX
 
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
@@ -429,6 +443,12 @@ config SPI_ROCKCHIP
 	  The main usecase of this controller is to use spi flash as boot
 	  device.
 
+config SPI_RB4XX
+	tristate "Mikrotik RB4XX SPI master"
+	depends on SPI_MASTER && ATH79
+	help
+	  SPI controller driver for the Mikrotik RB4xx series boards.
+
 config SPI_RSPI
 	tristate "Renesas RSPI/QSPI controller"
 	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
@@ -598,6 +618,17 @@ config SPI_XILINX
 
 	  Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"
 
+config SPI_XLP
+	tristate "Netlogic XLP SPI controller driver"
+	depends on CPU_XLP || COMPILE_TEST
+	help
+	  Enable support for the SPI controller on the Netlogic XLP SoCs.
+	  Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, XLP9XX
+	  and XLP5XX.
+
+	  If you have a Netlogic XLP platform say Y here.
+	  If unsure, say N.
+
 config SPI_XTENSA_XTFPGA
 	tristate "Xtensa SPI controller for xtfpga"
 	depends on (XTENSA && XTENSA_PLATFORM_XTFPGA) || COMPILE_TEST
@@ -610,6 +641,12 @@ config SPI_XTENSA_XTFPGA
 	  16 bit words in SPI mode 0, automatically asserting CS on transfer
 	  start and deasserting on end.
 
+config SPI_ZYNQMP_GQSPI
+	tristate "Xilinx ZynqMP GQSPI controller"
+	depends on SPI_MASTER && HAS_DMA
+	help
+	  Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC.
+
 config SPI_NUC900
 	tristate "Nuvoton NUC900 series SPI"
 	depends on ARCH_W90X900