X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?p=kvmfornfv.git;a=blobdiff_plain;f=kernel%2Fdrivers%2Fnet%2Farcnet%2Fcom90io.c;h=b57863df5bf53e6ee0269b4d9f2055a06011b1d1;hp=487d780ebbdfd73768f575e43353da5f2e8a1fa3;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hpb=f93b97fd65072de626c074dbe099a1fff05ce060 diff --git a/kernel/drivers/net/arcnet/com90io.c b/kernel/drivers/net/arcnet/com90io.c index 487d780eb..b57863df5 100644 --- a/kernel/drivers/net/arcnet/com90io.c +++ b/kernel/drivers/net/arcnet/com90io.c @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM90xx chipset (IO-mapped buffers) - * + * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Written 1999-2000 by Martin Mares . @@ -25,6 +25,9 @@ * * ********************** */ + +#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt + #include #include #include @@ -34,12 +37,10 @@ #include #include #include -#include -#include - - -#define VERSION "arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)\n" +#include +#include "arcdevice.h" +#include "com9026.h" /* Internal function declarations */ @@ -50,35 +51,14 @@ static void com90io_setmask(struct net_device *dev, int mask); static int com90io_reset(struct net_device *dev, int really_reset); static void com90io_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count); -static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offset, - void *buf, int count); - +static void com90io_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count); /* Handy defines for ARCnet specific stuff */ /* The number of low I/O ports used by the card. */ #define ARCNET_TOTAL_SIZE 16 -/* COM 9026 controller chip --> ARCnet register addresses */ -#define _INTMASK (ioaddr+0) /* writable */ -#define _STATUS (ioaddr+0) /* readable */ -#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */ -#define _RESET (ioaddr+8) /* software reset (on read) */ -#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */ -#define _ADDR_HI (ioaddr+15) /* Control registers for said */ -#define _ADDR_LO (ioaddr+14) -#define _CONFIG (ioaddr+2) /* Configuration register */ - -#undef ASTATUS -#undef ACOMMAND -#undef AINTMASK - -#define ASTATUS() inb(_STATUS) -#define ACOMMAND(cmd) outb((cmd),_COMMAND) -#define AINTMASK(msk) outb((msk),_INTMASK) -#define SETCONF() outb((lp->config),_CONFIG) - - /**************************************************************************** * * * IO-mapped operation routines * @@ -92,58 +72,59 @@ static u_char get_buffer_byte(struct net_device *dev, unsigned offset) { int ioaddr = dev->base_addr; - outb(offset >> 8, _ADDR_HI); - outb(offset & 0xff, _ADDR_LO); + arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); - return inb(_MEMDATA); + return arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); } #ifdef ONE_AT_A_TIME_TX -static void put_buffer_byte(struct net_device *dev, unsigned offset, u_char datum) +static void put_buffer_byte(struct net_device *dev, unsigned offset, + u_char datum) { int ioaddr = dev->base_addr; - outb(offset >> 8, _ADDR_HI); - outb(offset & 0xff, _ADDR_LO); + arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); - outb(datum, _MEMDATA); + arcnet_outb(datum, ioaddr, COM9026_REG_RW_MEMDATA); } #endif - -static void get_whole_buffer(struct net_device *dev, unsigned offset, unsigned length, char *dest) +static void get_whole_buffer(struct net_device *dev, unsigned offset, + unsigned length, char *dest) { int ioaddr = dev->base_addr; - outb((offset >> 8) | AUTOINCflag, _ADDR_HI); - outb(offset & 0xff, _ADDR_LO); + arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO); while (length--) #ifdef ONE_AT_A_TIME_RX *(dest++) = get_buffer_byte(dev, offset++); #else - *(dest++) = inb(_MEMDATA); + *(dest++) = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); #endif } -static void put_whole_buffer(struct net_device *dev, unsigned offset, unsigned length, char *dest) +static void put_whole_buffer(struct net_device *dev, unsigned offset, + unsigned length, char *dest) { int ioaddr = dev->base_addr; - outb((offset >> 8) | AUTOINCflag, _ADDR_HI); - outb(offset & 0xff, _ADDR_LO); + arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(offset & 0xff, ioaddr,COM9026_REG_W_ADDR_LO); while (length--) #ifdef ONE_AT_A_TIME_TX put_buffer_byte(dev, offset++, *(dest++)); #else - outb(*(dest++), _MEMDATA); + arcnet_outb(*(dest++), ioaddr, COM9026_REG_RW_MEMDATA); #endif } -/* - * We cannot probe for an IO mapped card either, although we can check that +/* We cannot probe for an IO mapped card either, although we can check that * it's where we were told it was, and even autoirq */ static int __init com90io_probe(struct net_device *dev) @@ -151,71 +132,78 @@ static int __init com90io_probe(struct net_device *dev) int ioaddr = dev->base_addr, status; unsigned long airqmask; - BUGLVL(D_NORMAL) printk(VERSION); - BUGLVL(D_NORMAL) printk("E-mail me if you actually test this driver, please!\n"); + if (BUGLVL(D_NORMAL)) { + pr_info("%s\n", "COM90xx IO-mapped mode support (by David Woodhouse et el.)"); + pr_info("E-mail me if you actually test this driver, please!\n"); + } if (!ioaddr) { - BUGMSG(D_NORMAL, "No autoprobe for IO mapped cards; you " - "must specify the base address!\n"); + arc_printk(D_NORMAL, dev, "No autoprobe for IO mapped cards; you must specify the base address!\n"); return -ENODEV; } if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com90io probe")) { - BUGMSG(D_INIT_REASONS, "IO request_region %x-%x failed.\n", - ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); + arc_printk(D_INIT_REASONS, dev, "IO request_region %x-%x failed\n", + ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); return -ENXIO; } - if (ASTATUS() == 0xFF) { - BUGMSG(D_INIT_REASONS, "IO address %x empty\n", ioaddr); + if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) { + arc_printk(D_INIT_REASONS, dev, "IO address %x empty\n", + ioaddr); goto err_out; } - inb(_RESET); + arcnet_inb(ioaddr, COM9026_REG_R_RESET); mdelay(RESETtime); - status = ASTATUS(); + status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) { - BUGMSG(D_INIT_REASONS, "Status invalid (%Xh).\n", status); + arc_printk(D_INIT_REASONS, dev, "Status invalid (%Xh)\n", + status); goto err_out; } - BUGMSG(D_INIT_REASONS, "Status after reset: %X\n", status); + arc_printk(D_INIT_REASONS, dev, "Status after reset: %X\n", status); - ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM9026_REG_W_COMMAND); - BUGMSG(D_INIT_REASONS, "Status after reset acknowledged: %X\n", status); + arc_printk(D_INIT_REASONS, dev, "Status after reset acknowledged: %X\n", + status); - status = ASTATUS(); + status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS); if (status & RESETflag) { - BUGMSG(D_INIT_REASONS, "Eternal reset (status=%Xh)\n", status); + arc_printk(D_INIT_REASONS, dev, "Eternal reset (status=%Xh)\n", + status); goto err_out; } - outb((0x16 | IOMAPflag) & ~ENABLE16flag, _CONFIG); + arcnet_outb((0x16 | IOMAPflag) & ~ENABLE16flag, + ioaddr, COM9026_REG_RW_CONFIG); /* Read first loc'n of memory */ - outb(AUTOINCflag, _ADDR_HI); - outb(0, _ADDR_LO); + arcnet_outb(AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI); + arcnet_outb(0, ioaddr, COM9026_REG_W_ADDR_LO); - if ((status = inb(_MEMDATA)) != 0xd1) { - BUGMSG(D_INIT_REASONS, "Signature byte not found" - " (%Xh instead).\n", status); + status = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA); + if (status != 0xd1) { + arc_printk(D_INIT_REASONS, dev, "Signature byte not found (%Xh instead).\n", + status); goto err_out; } if (!dev->irq) { - /* - * if we do this, we're sure to get an IRQ since the + /* if we do this, we're sure to get an IRQ since the * card has just reset and the NORXflag is on until * we tell it to start receiving. */ airqmask = probe_irq_on(); - outb(NORXflag, _INTMASK); + arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK); udelay(1); - outb(0, _INTMASK); + arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK); dev->irq = probe_irq_off(airqmask); if ((int)dev->irq <= 0) { - BUGMSG(D_INIT_REASONS, "Autoprobe IRQ failed\n"); + arc_printk(D_INIT_REASONS, dev, "Autoprobe IRQ failed\n"); goto err_out; } } @@ -227,7 +215,6 @@ err_out: return -ENODEV; } - /* Set up the struct net_device associated with this card. Called after * probing succeeds. */ @@ -238,12 +225,14 @@ static int __init com90io_found(struct net_device *dev) int err; /* Reserve the irq */ - if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (COM90xx-IO)", dev)) { - BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq); + if (request_irq(dev->irq, arcnet_interrupt, 0, + "arcnet (COM90xx-IO)", dev)) { + arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); return -ENODEV; } /* Reserve the I/O region */ - if (!request_region(dev->base_addr, ARCNET_TOTAL_SIZE, "arcnet (COM90xx-IO)")) { + if (!request_region(dev->base_addr, ARCNET_TOTAL_SIZE, + "arcnet (COM90xx-IO)")) { free_irq(dev->irq, dev); return -EBUSY; } @@ -259,7 +248,7 @@ static int __init com90io_found(struct net_device *dev) lp->hw.copy_from_card = com90io_copy_from_card; lp->config = (0x16 | IOMAPflag) & ~ENABLE16flag; - SETCONF(); + arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG); /* get and check the station ID from offset 1 in shmem */ @@ -267,21 +256,20 @@ static int __init com90io_found(struct net_device *dev) err = register_netdev(dev); if (err) { - outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG); + arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag, + ioaddr, COM9026_REG_RW_CONFIG); free_irq(dev->irq, dev); release_region(dev->base_addr, ARCNET_TOTAL_SIZE); return err; } - BUGMSG(D_NORMAL, "COM90IO: station %02Xh found at %03lXh, IRQ %d.\n", - dev->dev_addr[0], dev->base_addr, dev->irq); + arc_printk(D_NORMAL, dev, "COM90IO: station %02Xh found at %03lXh, IRQ %d.\n", + dev->dev_addr[0], dev->base_addr, dev->irq); return 0; } - -/* - * Do a hardware reset on the card, and set up necessary registers. +/* Do a hardware reset on the card, and set up necessary registers. * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. @@ -293,67 +281,66 @@ static int com90io_reset(struct net_device *dev, int really_reset) struct arcnet_local *lp = netdev_priv(dev); short ioaddr = dev->base_addr; - BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n", dev->name, ASTATUS()); + arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", + dev->name, arcnet_inb(ioaddr, COM9026_REG_R_STATUS)); if (really_reset) { /* reset the card */ - inb(_RESET); + arcnet_inb(ioaddr, COM9026_REG_R_RESET); mdelay(RESETtime); } /* Set the thing to IO-mapped, 8-bit mode */ lp->config = (0x1C | IOMAPflag) & ~ENABLE16flag; - SETCONF(); + arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG); - ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */ - ACOMMAND(CFLAGScmd | CONFIGclear); + arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND); + /* clear flags & end reset */ + arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND); /* verify that the ARCnet signature byte is present */ if (get_buffer_byte(dev, 0) != TESTvalue) { - BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n"); + arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); return 1; } /* enable extended (512-byte) packets */ - ACOMMAND(CONFIGcmd | EXTconf); - + arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND); /* done! return success. */ return 0; } - static void com90io_command(struct net_device *dev, int cmd) { short ioaddr = dev->base_addr; - ACOMMAND(cmd); + arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND); } - static int com90io_status(struct net_device *dev) { short ioaddr = dev->base_addr; - return ASTATUS(); + return arcnet_inb(ioaddr, COM9026_REG_R_STATUS); } - static void com90io_setmask(struct net_device *dev, int mask) { short ioaddr = dev->base_addr; - AINTMASK(mask); + arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK); } -static void com90io_copy_to_card(struct net_device *dev, int bufnum, int offset, - void *buf, int count) +static void com90io_copy_to_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) { - TIME("put_whole_buffer", count, put_whole_buffer(dev, bufnum * 512 + offset, count, buf)); + TIME(dev, "put_whole_buffer", count, + put_whole_buffer(dev, bufnum * 512 + offset, count, buf)); } - -static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offset, - void *buf, int count) +static void com90io_copy_from_card(struct net_device *dev, int bufnum, + int offset, void *buf, int count) { - TIME("get_whole_buffer", count, get_whole_buffer(dev, bufnum * 512 + offset, count, buf)); + TIME(dev, "get_whole_buffer", count, + get_whole_buffer(dev, bufnum * 512 + offset, count, buf)); } static int io; /* use the insmod io= irq= shmem= options */ @@ -369,12 +356,13 @@ MODULE_LICENSE("GPL"); static int __init com90io_setup(char *s) { int ints[4]; + s = get_options(s, 4, ints); if (!ints[0]) return 0; switch (ints[0]) { default: /* ERROR */ - printk("com90io: Too many arguments.\n"); + pr_err("Too many arguments\n"); case 2: /* IRQ */ irq = ints[2]; case 1: /* IO address */ @@ -421,8 +409,11 @@ static void __exit com90io_exit(void) unregister_netdev(dev); - /* Set the thing back to MMAP mode, in case the old driver is loaded later */ - outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG); + /* In case the old driver is loaded later, + * set the thing back to MMAP mode + */ + arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag, + ioaddr, COM9026_REG_RW_CONFIG); free_irq(dev->irq, dev); release_region(dev->base_addr, ARCNET_TOTAL_SIZE);