X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?p=kvmfornfv.git;a=blobdiff_plain;f=kernel%2FDocumentation%2Fdevicetree%2Fbindings%2Fpinctrl%2Fqcom%2Cpmic-mpp.txt;h=d7803a2a94e9be4c089a3ed69f8eaa23e935ee80;hp=ed19991aad35e2e5556b39f632c0607e5cdde5b9;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hpb=f93b97fd65072de626c074dbe099a1fff05ce060

diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/kernel/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
index ed19991aa..d7803a2a9 100644
--- a/kernel/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
+++ b/kernel/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
@@ -7,8 +7,13 @@ of PMIC's from Qualcomm.
 	Usage: required
 	Value type: <string>
 	Definition: Should contain one of:
+		    "qcom,pm8018-mpp",
+		    "qcom,pm8038-mpp",
+		    "qcom,pm8821-mpp",
 		    "qcom,pm8841-mpp",
 		    "qcom,pm8916-mpp",
+		    "qcom,pm8917-mpp",
+		    "qcom,pm8921-mpp",
 		    "qcom,pm8941-mpp",
 		    "qcom,pma8084-mpp",
 
@@ -77,12 +82,9 @@ to specify in a pin configuration subnode:
 	Value type: <string>
 	Definition: Specify the alternative function to be configured for the
 		    specified pins.  Valid values are:
-		    "normal",
-		    "paired",
-		    "dtest1",
-		    "dtest2",
-		    "dtest3",
-		    "dtest4"
+		    "digital",
+		    "analog",
+		    "sink"
 
 - bias-disable:
 	Usage: optional
@@ -127,12 +129,18 @@ to specify in a pin configuration subnode:
 	Definition: Selects the power source for the specified pins. Valid power
 		    sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
-- qcom,analog-mode:
+- qcom,analog-level:
 	Usage: optional
-	Value type: <none>
-	Definition: Selects Analog mode of operation: combined with input-enable
-		    and/or output-high, output-low MPP could operate as
-		    Bidirectional Logic, Analog Input, Analog Output.
+	Value type: <u32>
+	Definition: Selects the source for analog output. Valued values are
+		    defined in <dt-binding/pinctrl/qcom,pmic-mpp.h>
+		    PMIC_MPP_AOUT_LVL_*
+
+- qcom,dtest:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects which dtest rail to be routed in the various functions.
+		    Valid values are 1-4
 
 - qcom,amux-route:
 	Usage: optional
@@ -140,6 +148,10 @@ to specify in a pin configuration subnode:
 	Definition: Selects the source for analog input. Valid values are
 		    defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 		    PMIC_MPP_AMUX_ROUTE_CH5, PMIC_MPP_AMUX_ROUTE_CH6...
+- qcom,paired:
+	Usage: optional
+	Value type: <none>
+	Definition: Indicates that the pin should be operating in paired mode.
 
 Example:
 
@@ -156,7 +168,7 @@ Example:
 		pm8841_default: default {
 			gpio {
 				pins = "mpp1", "mpp2", "mpp3", "mpp4";
-				function = "normal";
+				function = "digital";
 				input-enable;
 				power-source = <PM8841_MPP_S3>;
 			};