--- /dev/null
+/*
+ * QEMU KVM support -- ARM specific functions.
+ *
+ * Copyright (c) 2012 Linaro Limited
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef QEMU_KVM_ARM_H
+#define QEMU_KVM_ARM_H
+
+#include "sysemu/kvm.h"
+#include "exec/memory.h"
+
+/**
+ * kvm_arm_vcpu_init:
+ * @cs: CPUState
+ *
+ * Initialize (or reinitialize) the VCPU by invoking the
+ * KVM_ARM_VCPU_INIT ioctl with the CPU type and feature
+ * bitmask specified in the CPUState.
+ *
+ * Returns: 0 if success else < 0 error code
+ */
+int kvm_arm_vcpu_init(CPUState *cs);
+
+/**
+ * kvm_arm_register_device:
+ * @mr: memory region for this device
+ * @devid: the KVM device ID
+ * @group: device control API group for setting addresses
+ * @attr: device control API address type
+ * @dev_fd: device control device file descriptor (or -1 if not supported)
+ *
+ * Remember the memory region @mr, and when it is mapped by the
+ * machine model, tell the kernel that base address using the
+ * KVM_ARM_SET_DEVICE_ADDRESS ioctl or the newer device control API. @devid
+ * should be the ID of the device as defined by KVM_ARM_SET_DEVICE_ADDRESS or
+ * the arm-vgic device in the device control API.
+ * The machine model may map
+ * and unmap the device multiple times; the kernel will only be told the final
+ * address at the point where machine init is complete.
+ */
+void kvm_arm_register_device(MemoryRegion *mr, uint64_t devid, uint64_t group,
+ uint64_t attr, int dev_fd);
+
+/**
+ * kvm_arm_init_cpreg_list:
+ * @cs: CPUState
+ *
+ * Initialize the CPUState's cpreg list according to the kernel's
+ * definition of what CPU registers it knows about (and throw away
+ * the previous TCG-created cpreg list).
+ *
+ * Returns: 0 if success, else < 0 error code
+ */
+int kvm_arm_init_cpreg_list(ARMCPU *cpu);
+
+/**
+ * kvm_arm_reg_syncs_via_cpreg_list
+ * regidx: KVM register index
+ *
+ * Return true if this KVM register should be synchronized via the
+ * cpreg list of arbitrary system registers, false if it is synchronized
+ * by hand using code in kvm_arch_get/put_registers().
+ */
+bool kvm_arm_reg_syncs_via_cpreg_list(uint64_t regidx);
+
+/**
+ * kvm_arm_cpreg_level
+ * regidx: KVM register index
+ *
+ * Return the level of this coprocessor/system register. Return value is
+ * either KVM_PUT_RUNTIME_STATE, KVM_PUT_RESET_STATE, or KVM_PUT_FULL_STATE.
+ */
+int kvm_arm_cpreg_level(uint64_t regidx);
+
+/**
+ * write_list_to_kvmstate:
+ * @cpu: ARMCPU
+ * @level: the state level to sync
+ *
+ * For each register listed in the ARMCPU cpreg_indexes list, write
+ * its value from the cpreg_values list into the kernel (via ioctl).
+ * This updates KVM's working data structures from TCG data or
+ * from incoming migration state.
+ *
+ * Returns: true if all register values were updated correctly,
+ * false if some register was unknown to the kernel or could not
+ * be written (eg constant register with the wrong value).
+ * Note that we do not stop early on failure -- we will attempt
+ * writing all registers in the list.
+ */
+bool write_list_to_kvmstate(ARMCPU *cpu, int level);
+
+/**
+ * write_kvmstate_to_list:
+ * @cpu: ARMCPU
+ *
+ * For each register listed in the ARMCPU cpreg_indexes list, write
+ * its value from the kernel into the cpreg_values list. This is used to
+ * copy info from KVM's working data structures into TCG or
+ * for outbound migration.
+ *
+ * Returns: true if all register values were read correctly,
+ * false if some register was unknown or could not be read.
+ * Note that we do not stop early on failure -- we will attempt
+ * reading all registers in the list.
+ */
+bool write_kvmstate_to_list(ARMCPU *cpu);
+
+/**
+ * kvm_arm_reset_vcpu:
+ * @cpu: ARMCPU
+ *
+ * Called at reset time to kernel registers to their initial values.
+ */
+void kvm_arm_reset_vcpu(ARMCPU *cpu);
+
+#ifdef CONFIG_KVM
+/**
+ * kvm_arm_create_scratch_host_vcpu:
+ * @cpus_to_try: array of QEMU_KVM_ARM_TARGET_* values (terminated with
+ * QEMU_KVM_ARM_TARGET_NONE) to try as fallback if the kernel does not
+ * know the PREFERRED_TARGET ioctl
+ * @fdarray: filled in with kvmfd, vmfd, cpufd file descriptors in that order
+ * @init: filled in with the necessary values for creating a host vcpu
+ *
+ * Create a scratch vcpu in its own VM of the type preferred by the host
+ * kernel (as would be used for '-cpu host'), for purposes of probing it
+ * for capabilities.
+ *
+ * Returns: true on success (and fdarray and init are filled in),
+ * false on failure (and fdarray and init are not valid).
+ */
+bool kvm_arm_create_scratch_host_vcpu(const uint32_t *cpus_to_try,
+ int *fdarray,
+ struct kvm_vcpu_init *init);
+
+/**
+ * kvm_arm_destroy_scratch_host_vcpu:
+ * @fdarray: array of fds as set up by kvm_arm_create_scratch_host_vcpu
+ *
+ * Tear down the scratch vcpu created by kvm_arm_create_scratch_host_vcpu.
+ */
+void kvm_arm_destroy_scratch_host_vcpu(int *fdarray);
+
+#define TYPE_ARM_HOST_CPU "host-" TYPE_ARM_CPU
+#define ARM_HOST_CPU_CLASS(klass) \
+ OBJECT_CLASS_CHECK(ARMHostCPUClass, (klass), TYPE_ARM_HOST_CPU)
+#define ARM_HOST_CPU_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(ARMHostCPUClass, (obj), TYPE_ARM_HOST_CPU)
+
+typedef struct ARMHostCPUClass {
+ /*< private >*/
+ ARMCPUClass parent_class;
+ /*< public >*/
+
+ uint64_t features;
+ uint32_t target;
+ const char *dtb_compatible;
+} ARMHostCPUClass;
+
+/**
+ * kvm_arm_get_host_cpu_features:
+ * @ahcc: ARMHostCPUClass to fill in
+ *
+ * Probe the capabilities of the host kernel's preferred CPU and fill
+ * in the ARMHostCPUClass struct accordingly.
+ */
+bool kvm_arm_get_host_cpu_features(ARMHostCPUClass *ahcc);
+
+
+/**
+ * kvm_arm_sync_mpstate_to_kvm
+ * @cpu: ARMCPU
+ *
+ * If supported set the KVM MP_STATE based on QEMU's model.
+ */
+int kvm_arm_sync_mpstate_to_kvm(ARMCPU *cpu);
+
+/**
+ * kvm_arm_sync_mpstate_to_qemu
+ * @cpu: ARMCPU
+ *
+ * If supported get the MP_STATE from KVM and store in QEMU's model.
+ */
+int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu);
+
+#endif
+
+#endif
Code Review / kvmfornfv.git / blobdiff