--- /dev/null
+VBE Display API
+-------------------------------------------------------------------------------------------------------------
+ This document is part of the Bochs/VBEBios documentation,
+ it specifies the bochs host <-> vbebios client communication.
+
+ That means, the display code implementation and the vbebios code depend
+ very heavily on each other. As such, this documents needs be synchronised
+ between bochs CVS and the vgabios CVS.
+
+ This document does not describe how the VBEBios implements the VBE2/3 spec.
+ This document does not describe how the Bochs display code will display gfx based upon this spec.
+
+
+API History
+-----------
+0xb0c0 supports the following VBE_DISPI_ interfaces (present in Bochs 1.4):
+ VBE_DISPI_INDEX_ID
+ VBE_DISPI_INDEX_XRES
+ VBE_DISPI_INDEX_YRES
+ VBE_DISPI_INDEX_BPP
+ VBE_DISPI_INDEX_ENABLE
+ VBE_DISPI_INDEX_BANK
+
+ Bpp format supported is:
+ VBE_DISPI_BPP_8
+
+0xb0c1 supports 0xb0c0 VBE_DISPI_ interfaces, additional interfaces (present in Bochs 2.0):
+ VBE_DISPI_INDEX_VIRT_WIDTH
+ VBE_DISPI_INDEX_VIRT_HEIGHT
+ VBE_DISPI_INDEX_X_OFFSET
+ VBE_DISPI_INDEX_Y_OFFSET
+
+0xb0c2 supports 0xb0c1 VBE_DISPI_ interfaces, interfaces updated for
+ additional features (present in Bochs 2.1):
+ VBE_DISPI_INDEX_BPP supports >8bpp color depth (value = bits)
+ VBE_DISPI_INDEX_ENABLE supports new flags VBE_DISPI_NOCLEARMEM and VBE_DISPI_LFB_ENABLED
+ VBE i/o registers changed from 0xFF80/81 to 0x01CE/CF
+
+0xb0c3 supports 0xb0c2 VBE_DISPI_ interfaces, interfaces updated for
+ additional features:
+ VBE_DISPI_INDEX_ENABLE supports new flags VBE_DISPI_GETCAPS and VBE_DISPI_8BIT_DAC
+
+0xb0c4 VBE video memory increased to 8 MB
+
+
+History
+-------
+ Version 0.6 2002 Nov 23 Jeroen Janssen
+ - Added LFB support
+ - Added Virt width, height and x,y offset
+
+ Version 0.5 2002 March 08 Jeroen Janssen
+ - Added documentation about panic behaviour / current limits of the data values.
+ - Changed BPP API (in order to include future (A)RGB formats)
+ - Initial version (based upon extended display text of the vbe bochs display patch)
+
+
+Todo
+----
+ Version 0.6+ [random order]
+ - Add lots of different (A)RGB formats
+
+References
+----------
+ [VBE3] VBE 3 Specification at
+ http://www.vesa.org/vbe3.pdf
+
+ [BOCHS] Bochs Open Source IA-32 Emulator at
+ http://bochs.sourceforge.net
+
+ [VBEBIOS] VBE Bios for Bochs at
+ http://savannah.gnu.org/projects/vgabios/
+
+ [Screenshots] Screenshots of programs using the VBE Bios at
+ http://japj.org/projects/bochs_plex86/screenshots.html
+
+Abbreviations
+-------------
+ VBE Vesa Bios Extension
+ DISPI (Bochs) Display Interface
+ BPP Bits Per Pixel
+ LFB Linear Frame Buffer
+
+
+#defines
+--------
+vbetables-gen.c
+ #define VBE_DISPI_TOTAL_VIDEO_MEMORY_MB 8
+
+vbe.h
+ #define VBE_DISPI_BANK_ADDRESS 0xA0000
+ #define VBE_DISPI_BANK_SIZE_KB 64
+
+ #define VBE_DISPI_MAX_XRES 1024
+ #define VBE_DISPI_MAX_YRES 768
+
+ #define VBE_DISPI_IOPORT_INDEX 0x01CE
+ #define VBE_DISPI_IOPORT_DATA 0x01CF
+
+ #define VBE_DISPI_INDEX_ID 0x0
+ #define VBE_DISPI_INDEX_XRES 0x1
+ #define VBE_DISPI_INDEX_YRES 0x2
+ #define VBE_DISPI_INDEX_BPP 0x3
+ #define VBE_DISPI_INDEX_ENABLE 0x4
+ #define VBE_DISPI_INDEX_BANK 0x5
+ #define VBE_DISPI_INDEX_VIRT_WIDTH 0x6
+ #define VBE_DISPI_INDEX_VIRT_HEIGHT 0x7
+ #define VBE_DISPI_INDEX_X_OFFSET 0x8
+ #define VBE_DISPI_INDEX_Y_OFFSET 0x9
+
+ #define VBE_DISPI_ID0 0xB0C0
+ #define VBE_DISPI_ID1 0xB0C1
+ #define VBE_DISPI_ID2 0xB0C2
+ #define VBE_DISPI_ID3 0xB0C3
+ #define VBE_DISPI_ID4 0xB0C4
+
+ #define VBE_DISPI_DISABLED 0x00
+ #define VBE_DISPI_ENABLED 0x01
+ #define VBE_DISPI_VBE_ENABLED 0x40
+ #define VBE_DISPI_NOCLEARMEM 0x80
+
+ #define VBE_DISPI_LFB_PHYSICAL_ADDRESS 0xE0000000
+
+API
+---
+ The display api works by using a index (VBE_DISPI_IOPORT_INDEX) and
+ data (VBE_DISPI_IOPORT_DATA) ioport. One writes the index of the parameter to the index port.
+ Next, the parameter value can be read or written.
+
+[0xb0c0]
+ * VBE_DISPI_INDEX_ID : WORD {R,W}
+ This parameter can be used to detect the current display API (both bochs & vbebios).
+ The bios writes VBE_DISPI_ID0 to the dataport and reads it back again.
+ This way, the display code knows the vbebios 'ID' and the vbebios can check if the correct
+ display code is present.
+ As a result, a PANIC can be generated if an incompatible vbebios/display code combination is detected.
+ This panic can be generated from the bochs display code (NOT the bios, see Notes).
+
+ Example values: VBE_DISPI_ID0
+
+ * VBE_DISPI_INDEX_XRES : WORD {R,W}
+ This parameter can be used to read/write the vbe display X resolution (in pixels).
+ It's illegal to set the XRES when the VBE is enabled (display code should generate PANIC).
+
+ If the value written exceeds VBE_DISPI_MAX_XRES, the display code needs to generate a PANIC.
+
+ Example values: 320,640,800,1024
+
+ * VBE_DISPI_INDEX_YRES : WORD {R,W}
+ This parameter can be used to read/write the vbe display Y resolution (in pixels).
+ It's illegal to set the YRES when the VBE is enabled (display code should generate PANIC).
+
+ If the value written exceeds VBE_DISPI_MAX_YRES, the display code needs to generate a PANIC.
+
+ Example values: 200,400,480,600,768
+
+ * VBE_DISPI_INDEX_BPP : WORD {R,W}
+ This parameter can be used to read/write the vbe display BPP.
+ It's illegal to set the BPP when the VBE is enabled (display code should generate PANIC).
+
+ If the value written is an incompatible BPP, the display code needs to generate a PANIC.
+
+ Example values: VBE_DISPI_BPP_8
+
+ * VBE_DISPI_INDEX_ENABLE : WORD {R,W}
+ This parameter can be used to read/write the vbe ENABLED state.
+ If the bios writes VBE_DISPI_ENABLED then the display code will setup a hostside display mode
+ with the current XRES, YRES and BPP settings.
+ If the bios write VBE_DISPI_DISABLED then the display code will switch back to normal vga mode behaviour.
+
+ Example values: VBE_DISPI_ENABLED, VBE_DISPI_DISABLED
+
+ * VBE_DISPI_INDEX_BANK : WORD {R,W}
+ This parameter can be used to read/write the current selected BANK (at 0xA0000).
+ This can be used for switching banks in banked mode.
+
+[0xb0c1]
+ * VBE_DISPI_INDEX_VIRT_WIDTH : WORD {R,W}
+ This parameter can be used to read/write the current virtual width.
+ Upon enabling a mode, this will be set to the current xres
+ Setting this field during enabled mode will result in the virtual width to be changed.
+ Value will be adjusted if current setting is not possible.
+
+ * VBE_DISPI_INDEX_VIRT_HEIGHT : WORD {R}
+ This parameter can be read in order to obtain the current virtual height.
+ This setting will be adjusted after setting a virtual width in order to stay within limit of video memory.
+
+ * VBE_DISPI_INDEX_X_OFFSET : WORD {R,W}
+ The current X offset (in pixels!) of the visible screen part.
+ Writing a new offset will also result in a complete screen refresh.
+
+ * VBE_DISPI_INDEX_Y_OFFSET : WORD {R,W}
+ The current Y offset (in pixels!) of the visible screen part.
+ Writing a new offset will also result in a complete screen refresh.
+
+
+[0xb0c2]
+ * VBE_DISPI_INDEX_BPP : WORD {R,W}
+ The value written is now the number of bits per pixel. A value of 0 is treated
+ the same as 8 for backward compatibilty. These values are supported: 8, 15,
+ 16, 24 and 32. The value of 4 is not yet handled in the VBE code.
+ * VBE_DISPI_INDEX_ENABLE : WORD {R,W}
+ The new flag VBE_DISPI_NOCLEARMEM allows to preserve the VBE video memory.
+ The new flag VBE_DISPI_LFB_ENABLED indicates the usage of the LFB.
+
+[0xb0c3]
+ * VBE_DISPI_INDEX_ENABLE : WORD {R,W}
+ If the new flag VBE_DISPI_GETCAPS is enabled, the xres, yres and bpp registers
+ return the gui capabilities.
+ The new flag VBE_DISPI_8BIT_DAC switches the DAC to 8 bit mode.
+
+[0xb0c4]
+ * VBE_DISPI_TOTAL_VIDEO_MEMORY_MB set to 8 (moved to auto-generated vbetables.h)
+
+Displaying GFX (banked mode)
+--------------
+ What happens is that the total screen is devided in banks of 'VBE_DISPI_BANK_SIZE_KB' KiloByte in size.
+ If you want to set a pixel you can calculate its bank by doing:
+
+ offset = pixel_x + pixel_y * resolution_x;
+ bank = offset / 64 Kb (rounded 1.9999 -> 1)
+
+ bank_pixel_pos = offset - bank * 64Kb
+
+ Now you can set the current bank and put the pixel at VBE_DISPI_BANK_ADDRESS + bank_pixel_pos
+
+Displaying GFX (linear frame buffer mode)
+--------------
+ NOT WRITTEN YET
+
+Notes
+-----
+ * Since the XRES/YRES/BPP may not be written when VBE is enabled, if you want to switch from one VBE mode
+ to another, you will need to disable VBE first.
+
+ * Note when the bios doesn't find a valid DISPI_ID, it can disable the VBE functions. This allows people to
+ use the same bios for both vbe enabled and disabled bochs executables.
Code Review / kvmfornfv.git / blobdiff