Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / tools / ublimage.c
diff --git a/qemu/roms/u-boot/tools/ublimage.c b/qemu/roms/u-boot/tools/ublimage.c
new file mode 100644 (file)
index 0000000..cbbbe20
--- /dev/null
@@ -0,0 +1,261 @@
+/*
+ * (C) Copyright 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * (C) Copyright 2008
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include "imagetool.h"
+#include <image.h>
+#include "ublimage.h"
+
+/*
+ * Supported commands for configuration file
+ */
+static table_entry_t ublimage_cmds[] = {
+       {CMD_BOOT_MODE, "MODE",         "UBL special modes", },
+       {CMD_ENTRY,     "ENTRY",        "Entry point addr for bootloader", },
+       {CMD_PAGE,      "PAGES",
+               "number of pages (size of bootloader)", },
+       {CMD_ST_BLOCK,  "START_BLOCK",
+               "block number where bootloader is present", },
+       {CMD_ST_PAGE,   "START_PAGE",
+               "page number where bootloader is present", },
+       {CMD_LD_ADDR,   "LD_ADDR",
+               "load addr", },
+       {-1,            "",             "", },
+};
+
+/*
+ * Supported Boot options for configuration file
+ * this is needed to set the correct flash offset
+ */
+static table_entry_t ublimage_bootops[] = {
+       {UBL_MAGIC_SAFE,        "safe", "Safe boot mode",       },
+       {-1,                    "",     "Invalid",              },
+};
+
+static struct ubl_header ublimage_header;
+
+static uint32_t get_cfg_value(char *token, char *name,  int linenr)
+{
+       char *endptr;
+       uint32_t value;
+
+       errno = 0;
+       value = strtoul(token, &endptr, 16);
+       if (errno || (token == endptr)) {
+               fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n",
+                       name,  linenr, token);
+               exit(EXIT_FAILURE);
+       }
+       return value;
+}
+
+static void print_hdr(struct ubl_header *ubl_hdr)
+{
+       printf("Image Type : Davinci UBL Boot Image\n");
+       printf("UBL magic  : %08x\n", ubl_hdr->magic);
+       printf("Entry Point: %08x\n", ubl_hdr->entry);
+       printf("nr of pages: %08x\n", ubl_hdr->pages);
+       printf("start block: %08x\n", ubl_hdr->block);
+       printf("start page : %08x\n", ubl_hdr->page);
+}
+
+static void parse_cfg_cmd(struct ubl_header *ublhdr, int32_t cmd, char *token,
+                               char *name, int lineno, int fld, int dcd_len)
+{
+       static int cmd_ver_first = ~0;
+
+       switch (cmd) {
+       case CMD_BOOT_MODE:
+               ublhdr->magic = get_table_entry_id(ublimage_bootops,
+                                       "ublimage special boot mode", token);
+               if (ublhdr->magic == -1) {
+                       fprintf(stderr, "Error: %s[%d] -Invalid boot mode"
+                               "(%s)\n", name, lineno, token);
+                       exit(EXIT_FAILURE);
+               }
+               ublhdr->magic += UBL_MAGIC_BASE;
+               if (unlikely(cmd_ver_first != 1))
+                       cmd_ver_first = 0;
+               break;
+       case CMD_ENTRY:
+               ublhdr->entry = get_cfg_value(token, name, lineno);
+               break;
+       case CMD_PAGE:
+               ublhdr->pages = get_cfg_value(token, name, lineno);
+               break;
+       case CMD_ST_BLOCK:
+               ublhdr->block = get_cfg_value(token, name, lineno);
+               break;
+       case CMD_ST_PAGE:
+               ublhdr->page = get_cfg_value(token, name, lineno);
+               break;
+       case CMD_LD_ADDR:
+               ublhdr->pll_m = get_cfg_value(token, name, lineno);
+               break;
+       }
+}
+
+static void parse_cfg_fld(struct ubl_header *ublhdr, int32_t *cmd,
+               char *token, char *name, int lineno, int fld, int *dcd_len)
+{
+
+       switch (fld) {
+       case CFG_COMMAND:
+               *cmd = get_table_entry_id(ublimage_cmds,
+                       "ublimage commands", token);
+               if (*cmd < 0) {
+                       fprintf(stderr, "Error: %s[%d] - Invalid command"
+                       "(%s)\n", name, lineno, token);
+                       exit(EXIT_FAILURE);
+               }
+               break;
+       case CFG_REG_VALUE:
+               parse_cfg_cmd(ublhdr, *cmd, token, name, lineno, fld, *dcd_len);
+               break;
+       default:
+               break;
+       }
+}
+static uint32_t parse_cfg_file(struct ubl_header *ublhdr, char *name)
+{
+       FILE *fd = NULL;
+       char *line = NULL;
+       char *token, *saveptr1, *saveptr2;
+       int lineno = 0;
+       int     i;
+       char *ptr = (char *)ublhdr;
+       int fld;
+       size_t len;
+       int dcd_len = 0;
+       int32_t cmd;
+       int ublhdrlen = sizeof(struct ubl_header);
+
+       fd = fopen(name, "r");
+       if (fd == 0) {
+               fprintf(stderr, "Error: %s - Can't open DCD file\n", name);
+               exit(EXIT_FAILURE);
+       }
+
+       /* Fill header with 0xff */
+       for (i = 0; i < ublhdrlen; i++) {
+               *ptr = 0xff;
+               ptr++;
+       }
+
+       /*
+        * Very simple parsing, line starting with # are comments
+        * and are dropped
+        */
+       while ((getline(&line, &len, fd)) > 0) {
+               lineno++;
+
+               token = strtok_r(line, "\r\n", &saveptr1);
+               if (token == NULL)
+                       continue;
+
+               /* Check inside the single line */
+               for (fld = CFG_COMMAND, cmd = CMD_INVALID,
+                               line = token; ; line = NULL, fld++) {
+                       token = strtok_r(line, " \t", &saveptr2);
+                       if (token == NULL)
+                               break;
+
+                       /* Drop all text starting with '#' as comments */
+                       if (token[0] == '#')
+                               break;
+
+                       parse_cfg_fld(ublhdr, &cmd, token, name,
+                                       lineno, fld, &dcd_len);
+               }
+       }
+       fclose(fd);
+
+       return dcd_len;
+}
+
+static int ublimage_check_image_types(uint8_t type)
+{
+       if (type == IH_TYPE_UBLIMAGE)
+               return EXIT_SUCCESS;
+       else
+               return EXIT_FAILURE;
+}
+
+static int ublimage_verify_header(unsigned char *ptr, int image_size,
+                       struct image_tool_params *params)
+{
+       struct ubl_header *ubl_hdr = (struct ubl_header *)ptr;
+
+       if ((ubl_hdr->magic & 0xFFFFFF00) != UBL_MAGIC_BASE)
+               return -1;
+
+       return 0;
+}
+
+static void ublimage_print_header(const void *ptr)
+{
+       struct ubl_header *ubl_hdr = (struct ubl_header *) ptr;
+
+       print_hdr(ubl_hdr);
+}
+
+static void ublimage_set_header(void *ptr, struct stat *sbuf, int ifd,
+                               struct image_tool_params *params)
+{
+       struct ubl_header *ublhdr = (struct ubl_header *)ptr;
+
+       /* Parse configuration file */
+       parse_cfg_file(ublhdr, params->imagename);
+}
+
+int ublimage_check_params(struct image_tool_params *params)
+{
+       if (!params)
+               return CFG_INVALID;
+       if (!strlen(params->imagename)) {
+               fprintf(stderr, "Error: %s - Configuration file not"
+                       "specified, it is needed for ublimage generation\n",
+                       params->cmdname);
+               return CFG_INVALID;
+       }
+       /*
+        * Check parameters:
+        * XIP is not allowed and verify that incompatible
+        * parameters are not sent at the same time
+        * For example, if list is required a data image must not be provided
+        */
+       return  (params->dflag && (params->fflag || params->lflag)) ||
+               (params->fflag && (params->dflag || params->lflag)) ||
+               (params->lflag && (params->dflag || params->fflag)) ||
+               (params->xflag) || !(strlen(params->imagename));
+}
+
+/*
+ * ublimage parameters
+ */
+static struct image_type_params ublimage_params = {
+       .name           = "Davinci UBL boot support",
+       .header_size    = sizeof(struct ubl_header),
+       .hdr            = (void *)&ublimage_header,
+       .check_image_type = ublimage_check_image_types,
+       .verify_header  = ublimage_verify_header,
+       .print_header   = ublimage_print_header,
+       .set_header     = ublimage_set_header,
+       .check_params   = ublimage_check_params,
+};
+
+void init_ubl_image_type(void)
+{
+       register_image_type(&ublimage_params);
+}