Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / include / phy.h
diff --git a/qemu/roms/u-boot/include/phy.h b/qemu/roms/u-boot/include/phy.h
new file mode 100644 (file)
index 0000000..d3ecd63
--- /dev/null
@@ -0,0 +1,242 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *     Andy Fleming <afleming@freescale.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ *
+ * This file pretty much stolen from Linux's mii.h/ethtool.h/phy.h
+ */
+
+#ifndef _PHY_H
+#define _PHY_H
+
+#include <linux/list.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/mdio.h>
+
+#define PHY_MAX_ADDR 32
+
+#define PHY_BASIC_FEATURES     (SUPPORTED_10baseT_Half | \
+                                SUPPORTED_10baseT_Full | \
+                                SUPPORTED_100baseT_Half | \
+                                SUPPORTED_100baseT_Full | \
+                                SUPPORTED_Autoneg | \
+                                SUPPORTED_TP | \
+                                SUPPORTED_MII)
+
+#define PHY_GBIT_FEATURES      (PHY_BASIC_FEATURES | \
+                                SUPPORTED_1000baseT_Half | \
+                                SUPPORTED_1000baseT_Full)
+
+#define PHY_10G_FEATURES       (PHY_GBIT_FEATURES | \
+                               SUPPORTED_10000baseT_Full)
+
+#define PHY_ANEG_TIMEOUT       4000
+
+
+typedef enum {
+       PHY_INTERFACE_MODE_MII,
+       PHY_INTERFACE_MODE_GMII,
+       PHY_INTERFACE_MODE_SGMII,
+       PHY_INTERFACE_MODE_QSGMII,
+       PHY_INTERFACE_MODE_TBI,
+       PHY_INTERFACE_MODE_RMII,
+       PHY_INTERFACE_MODE_RGMII,
+       PHY_INTERFACE_MODE_RGMII_ID,
+       PHY_INTERFACE_MODE_RGMII_RXID,
+       PHY_INTERFACE_MODE_RGMII_TXID,
+       PHY_INTERFACE_MODE_RTBI,
+       PHY_INTERFACE_MODE_XGMII,
+       PHY_INTERFACE_MODE_NONE /* Must be last */
+} phy_interface_t;
+
+static const char *phy_interface_strings[] = {
+       [PHY_INTERFACE_MODE_MII]                = "mii",
+       [PHY_INTERFACE_MODE_GMII]               = "gmii",
+       [PHY_INTERFACE_MODE_SGMII]              = "sgmii",
+       [PHY_INTERFACE_MODE_QSGMII]             = "qsgmii",
+       [PHY_INTERFACE_MODE_TBI]                = "tbi",
+       [PHY_INTERFACE_MODE_RMII]               = "rmii",
+       [PHY_INTERFACE_MODE_RGMII]              = "rgmii",
+       [PHY_INTERFACE_MODE_RGMII_ID]           = "rgmii-id",
+       [PHY_INTERFACE_MODE_RGMII_RXID]         = "rgmii-rxid",
+       [PHY_INTERFACE_MODE_RGMII_TXID]         = "rgmii-txid",
+       [PHY_INTERFACE_MODE_RTBI]               = "rtbi",
+       [PHY_INTERFACE_MODE_XGMII]              = "xgmii",
+       [PHY_INTERFACE_MODE_NONE]               = "",
+};
+
+static inline const char *phy_string_for_interface(phy_interface_t i)
+{
+       /* Default to unknown */
+       if (i > PHY_INTERFACE_MODE_NONE)
+               i = PHY_INTERFACE_MODE_NONE;
+
+       return phy_interface_strings[i];
+}
+
+
+struct phy_device;
+
+#define MDIO_NAME_LEN 32
+
+struct mii_dev {
+       struct list_head link;
+       char name[MDIO_NAME_LEN];
+       void *priv;
+       int (*read)(struct mii_dev *bus, int addr, int devad, int reg);
+       int (*write)(struct mii_dev *bus, int addr, int devad, int reg,
+                       u16 val);
+       int (*reset)(struct mii_dev *bus);
+       struct phy_device *phymap[PHY_MAX_ADDR];
+       u32 phy_mask;
+};
+
+/* struct phy_driver: a structure which defines PHY behavior
+ *
+ * uid will contain a number which represents the PHY.  During
+ * startup, the driver will poll the PHY to find out what its
+ * UID--as defined by registers 2 and 3--is.  The 32-bit result
+ * gotten from the PHY will be masked to
+ * discard any bits which may change based on revision numbers
+ * unimportant to functionality
+ *
+ */
+struct phy_driver {
+       char *name;
+       unsigned int uid;
+       unsigned int mask;
+       unsigned int mmds;
+
+       u32 features;
+
+       /* Called to do any driver startup necessities */
+       /* Will be called during phy_connect */
+       int (*probe)(struct phy_device *phydev);
+
+       /* Called to configure the PHY, and modify the controller
+        * based on the results.  Should be called after phy_connect */
+       int (*config)(struct phy_device *phydev);
+
+       /* Called when starting up the controller */
+       int (*startup)(struct phy_device *phydev);
+
+       /* Called when bringing down the controller */
+       int (*shutdown)(struct phy_device *phydev);
+
+       int (*readext)(struct phy_device *phydev, int addr, int devad, int reg);
+       int (*writeext)(struct phy_device *phydev, int addr, int devad, int reg,
+                       u16 val);
+       struct list_head list;
+};
+
+struct phy_device {
+       /* Information about the PHY type */
+       /* And management functions */
+       struct mii_dev *bus;
+       struct phy_driver *drv;
+       void *priv;
+
+       struct eth_device *dev;
+
+       /* forced speed & duplex (no autoneg)
+        * partner speed & duplex & pause (autoneg)
+        */
+       int speed;
+       int duplex;
+
+       /* The most recently read link state */
+       int link;
+       int port;
+       phy_interface_t interface;
+
+       u32 advertising;
+       u32 supported;
+       u32 mmds;
+
+       int autoneg;
+       int addr;
+       int pause;
+       int asym_pause;
+       u32 phy_id;
+       u32 flags;
+};
+
+struct fixed_link {
+       int phy_id;
+       int duplex;
+       int link_speed;
+       int pause;
+       int asym_pause;
+};
+
+static inline int phy_read(struct phy_device *phydev, int devad, int regnum)
+{
+       struct mii_dev *bus = phydev->bus;
+
+       return bus->read(bus, phydev->addr, devad, regnum);
+}
+
+static inline int phy_write(struct phy_device *phydev, int devad, int regnum,
+                       u16 val)
+{
+       struct mii_dev *bus = phydev->bus;
+
+       return bus->write(bus, phydev->addr, devad, regnum, val);
+}
+
+#ifdef CONFIG_PHYLIB_10G
+extern struct phy_driver gen10g_driver;
+
+/* For now, XGMII is the only 10G interface */
+static inline int is_10g_interface(phy_interface_t interface)
+{
+       return interface == PHY_INTERFACE_MODE_XGMII;
+}
+
+#endif
+
+int phy_init(void);
+int phy_reset(struct phy_device *phydev);
+struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask,
+               phy_interface_t interface);
+void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev);
+struct phy_device *phy_connect(struct mii_dev *bus, int addr,
+                               struct eth_device *dev,
+                               phy_interface_t interface);
+int phy_startup(struct phy_device *phydev);
+int phy_config(struct phy_device *phydev);
+int phy_shutdown(struct phy_device *phydev);
+int phy_register(struct phy_driver *drv);
+int genphy_config_aneg(struct phy_device *phydev);
+int genphy_restart_aneg(struct phy_device *phydev);
+int genphy_update_link(struct phy_device *phydev);
+int genphy_parse_link(struct phy_device *phydev);
+int genphy_config(struct phy_device *phydev);
+int genphy_startup(struct phy_device *phydev);
+int genphy_shutdown(struct phy_device *phydev);
+int gen10g_config(struct phy_device *phydev);
+int gen10g_startup(struct phy_device *phydev);
+int gen10g_shutdown(struct phy_device *phydev);
+int gen10g_discover_mmds(struct phy_device *phydev);
+
+int phy_atheros_init(void);
+int phy_broadcom_init(void);
+int phy_davicom_init(void);
+int phy_et1011c_init(void);
+int phy_lxt_init(void);
+int phy_marvell_init(void);
+int phy_micrel_init(void);
+int phy_natsemi_init(void);
+int phy_realtek_init(void);
+int phy_smsc_init(void);
+int phy_teranetics_init(void);
+int phy_vitesse_init(void);
+
+int board_phy_config(struct phy_device *phydev);
+
+/* PHY UIDs for various PHYs that are referenced in external code */
+#define PHY_UID_TN2020 0x00a19410
+
+#endif