Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / include / nios2-yanu.h
diff --git a/qemu/roms/u-boot/include/nios2-yanu.h b/qemu/roms/u-boot/include/nios2-yanu.h
new file mode 100644 (file)
index 0000000..6c16f5b
--- /dev/null
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2006, Imagos S.a.s <www.imagos.it>
+ * Renato Andreola <renato.andreola@imagos.it>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*************************************************************************
+ * Altera NiosII YANU serial interface by Imagos
+ * please see  http://www.opencores.org/project,yanu for
+ * information/downloads
+ ************************************************************************/
+
+#ifndef __NIOS2_YANU_H__
+#define __NIOS2_YANU_H__
+
+#define YANU_MAX_PRESCALER_N   ((1 << 4) - 1)  /* 15 */
+#define YANU_MAX_PRESCALER_M   ((1 << 11) -1)  /* 2047 */
+#define YANU_FIFO_SIZE         (16)
+#define YANU_RXFIFO_SIZE       (YANU_FIFO_SIZE)
+#define YANU_TXFIFO_SIZE       (YANU_FIFO_SIZE)
+
+#define YANU_RXFIFO_DLY        (10*11)
+#define YANU_TXFIFO_THR        (10)
+#define YANU_DATA_CHAR_MASK    (0xFF)
+
+/* data register */
+#define YANU_DATA_OFFSET       (0)     /* data register offset */
+
+#define YANU_CONTROL_OFFSET    (4)     /* control register offset */
+/* interrupt enable */
+#define YANU_CONTROL_IE_RRDY   (1<<0)  /* ie on received character ready */
+#define YANU_CONTROL_IE_OE     (1<<1)  /* ie on rx overrun    */
+#define YANU_CONTROL_IE_BRK    (1<<2)  /* ie on break detect  */
+#define YANU_CONTROL_IE_FE     (1<<3)  /* ie on framing error */
+#define YANU_CONTROL_IE_PE     (1<<4)  /* ie on parity error  */
+#define YANU_CONTROL_IE_TRDY   (1<<5)  /* ie interrupt on tranmitter ready */
+/* control bits */
+#define YANU_CONTROL_BITS_POS  (6)     /* bits number pos */
+#define YANU_CONTROL_BITS      (1<<YANU_CONTROL_BITS_POS)      /* number of rx/tx bits per word. 3 bit unsigned integer */
+#define YANU_CONTROL_BITS_N    (3)     /* ... its bit filed length */
+#define YANU_CONTROL_PARENA    (1<<9)  /*  enable parity bit transmission/reception */
+#define YANU_CONTROL_PAREVEN   (1<<10) /* parity even */
+#define YANU_CONTROL_STOPS     (1<<11) /* number of stop bits */
+#define YANU_CONTROL_HHENA     (1<<12) /* Harware Handshake enable... */
+#define YANU_CONTROL_FORCEBRK  (1<<13) /* if set than txd = active (0) */
+/* tuning part */
+#define YANU_CONTROL_RDYDLY    (1<<14) /* delay from "first" before setting rrdy (in bit) */
+#define YANU_CONTROL_RDYDLY_N  (8)     /* ... its bit filed length */
+#define YANU_CONTROL_TXTHR     (1<<22) /* tx interrupt threshold: the trdy set if txfifo_chars<= txthr (chars) */
+#define YANU_CONTROL_TXTHR_N   (4)     /* ... its bit field length */
+
+#define YANU_BAUD_OFFSET  (8)  /* baud register offset */
+#define YANU_BAUDM        (1<<0)       /* baud mantissa lsb */
+#define YANU_BAUDM_N      (12) /* ...its bit filed length */
+#define YANU_BAUDE        (1<<12)      /* baud exponent lsb */
+#define YANU_BAUDE_N      (4)  /* ...its bit field length */
+
+#define YANU_ACTION_OFFSET   (12)      /* action register... write only */
+#define YANU_ACTION_RRRDY    (1<<0)    /* reset rrdy */
+#define YANU_ACTION_ROE      (1<<1)    /* reset oe */
+#define YANU_ACTION_RBRK     (1<<2)    /* reset brk */
+#define YANU_ACTION_RFE      (1<<3)    /* reset fe  */
+#define YANU_ACTION_RPE      (1<<4)    /* reset pe  */
+#define YANU_ACTION_SRRDY    (1<<5)    /* set rrdy  */
+#define YANU_ACTION_SOE      (1<<6)    /* set oe    */
+#define YANU_ACTION_SBRK     (1<<7)    /* set brk   */
+#define YANU_ACTION_SFE      (1<<8)    /* set fe    */
+#define YANU_ACTION_SPE      (1<<9)    /* set pe    */
+#define YANU_ACTION_RFIFO_PULL  (1<<10)        /* pull a char from rx fifo we MUST do it before taking a char */
+#define YANU_ACTION_RFIFO_CLEAR (1<<11)        /* clear rx fifo */
+#define YANU_ACTION_TFIFO_CLEAR (1<<12)        /* clear tx fifo */
+#define YANU_ACTION_RTRDY       (1<<13)        /* clear trdy    */
+#define YANU_ACTION_STRDY       (1<<14)        /* set trdy      */
+
+#define YANU_STATUS_OFFSET   (16)
+#define YANU_STATUS_RRDY     (1<<0)    /* rxrdy flag */
+#define YANU_STATUS_TRDY     (1<<1)    /* txrdy flag */
+#define YANU_STATUS_OE       (1<<2)    /* rx overrun error */
+#define YANU_STATUS_BRK      (1<<3)    /* rx break detect flag */
+#define YANU_STATUS_FE       (1<<4)    /* rx framing error flag */
+#define YANU_STATUS_PE       (1<<5)    /* rx parity erro flag */
+#define YANU_RFIFO_CHARS_POS (6)
+#define YANU_RFIFO_CHARS     (1<<RFIFO_CHAR_POS)       /* number of chars into rx fifo */
+#define YANU_RFIFO_CHARS_N   (5)       /* ...its bit field length: 32 chars */
+#define YANU_TFIFO_CHARS_POS (11)
+#define YANU_TFIFO_CHARS     (1<<TFIFO_CHAR_POS)       /* number of chars into tx fifo */
+#define YANU_TFIFO_CHARS_N   (5)       /* ...its bit field length: 32 chars */
+
+typedef volatile struct yanu_uart_t {
+       volatile unsigned data;
+       volatile unsigned control;      /* control register (RW) 32-bit   */
+       volatile unsigned baud; /* baud/prescaler register (RW) 32-bit */
+       volatile unsigned action;       /* action register (W) 32-bit */
+       volatile unsigned status;       /* status register (R) 32-bit */
+       volatile unsigned magic;        /* magic register (R) 32-bit */
+} yanu_uart_t;
+
+#endif