Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / mv88e6352.h

diff --git a/qemu/roms/u-boot/include/mv88e6352.h b/qemu/roms/u-boot/include/mv88e6352.h
new file mode 100644 (file)
index 0000000..a34b434
--- /dev/null
+++ b/qemu/roms/u-boot/include/mv88e6352.h
@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2012
+ * Valentin Lontgchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __MV886352_H
+#define __MV886352_H
+
+#include <common.h>
+
+/* PHY registers */
+#define PHY(itf)       (itf)
+
+#define PHY_CTRL       0x00
+#define PHY_100_MBPS   0x2000
+#define PHY_1_GBPS     0x0040
+#define AUTONEG_EN     0x1000
+#define AUTONEG_RST    0x0200
+#define FULL_DUPLEX    0x0100
+#define PHY_PWR_DOWN   0x0800
+
+#define PHY_STATUS     0x01
+#define AN1000FIX      0x0001
+
+#define PHY_SPEC_CTRL  0x10
+#define SPEC_PWR_DOWN  0x0004
+#define AUTO_MDIX_EN   0x0060
+
+#define PHY_1000_CTRL  0x9
+
+#define NO_ADV         0x0000
+#define ADV_1000_FDPX  0x0200
+#define ADV_1000_HDPX  0x0100
+
+#define PHY_PAGE       0x16
+
+#define AN1000FIX_PAGE 0x00fc
+
+/* PORT or MAC registers */
+#define PORT(itf)      (itf+0x10)
+
+#define PORT_STATUS    0x00
+#define NO_PHY_DETECT  0x0000
+
+#define PORT_PHY       0x01
+#define RX_RGMII_TIM   0x8000
+#define TX_RGMII_TIM   0x4000
+#define FLOW_CTRL_EN   0x0080
+#define FLOW_CTRL_FOR  0x0040
+#define LINK_VAL       0x0020
+#define LINK_FOR       0x0010
+#define FULL_DPX       0x0008
+#define FULL_DPX_FOR   0x0004
+#define NO_SPEED_FOR   0x0003
+#define SPEED_1000_FOR 0x0002
+#define SPEED_100_FOR  0x0001
+#define SPEED_10_FOR   0x0000
+
+#define PORT_CTRL      0x04
+#define FORWARDING     0x0003
+#define EGRS_FLD_ALL   0x000c
+#define PORT_DIS       0x0000
+
+struct mv88e_sw_reg {
+       u8 port;
+       u8 reg;
+       u16 value;
+};
+
+int mv88e_sw_reset(const char *devname, u8 phy_addr);
+int mv88e_sw_program(const char *devname, u8 phy_addr,
+       struct mv88e_sw_reg *regs, int regs_nb);
+
+#endif