--- /dev/null
+/*
+ * composite.h -- framework for usb gadgets which are composite devices
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LINUX_USB_COMPOSITE_H
+#define __LINUX_USB_COMPOSITE_H
+
+/*
+ * This framework is an optional layer on top of the USB Gadget interface,
+ * making it easier to build (a) Composite devices, supporting multiple
+ * functions within any single configuration, and (b) Multi-configuration
+ * devices, also supporting multiple functions but without necessarily
+ * having more than one function per configuration.
+ *
+ * Example: a device with a single configuration supporting both network
+ * link and mass storage functions is a composite device. Those functions
+ * might alternatively be packaged in individual configurations, but in
+ * the composite model the host can use both functions at the same time.
+ */
+
+#include <common.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <usb/lin_gadget_compat.h>
+
+struct usb_configuration;
+
+/**
+ * struct usb_function - describes one function of a configuration
+ * @name: For diagnostics, identifies the function.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ * and by language IDs provided in control requests
+ * @descriptors: Table of full (or low) speed descriptors, using interface and
+ * string identifiers assigned during @bind(). If this pointer is null,
+ * the function will not be available at full speed (or at low speed).
+ * @hs_descriptors: Table of high speed descriptors, using interface and
+ * string identifiers assigned during @bind(). If this pointer is null,
+ * the function will not be available at high speed.
+ * @config: assigned when @usb_add_function() is called; this is the
+ * configuration with which this function is associated.
+ * @bind: Before the gadget can register, all of its functions bind() to the
+ * available resources including string and interface identifiers used
+ * in interface or class descriptors; endpoints; I/O buffers; and so on.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ * driver which added this function.
+ * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
+ * initialize usb_ep.driver data at this time (when it is used).
+ * Note that setting an interface to its current altsetting resets
+ * interface state, and that all interfaces have a disabled state.
+ * @get_alt: Returns the active altsetting. If this is not provided,
+ * then only altsetting zero is supported.
+ * @disable: (REQUIRED) Indicates the function should be disabled. Reasons
+ * include host resetting or reconfiguring the gadget, and disconnection.
+ * @setup: Used for interface-specific control requests.
+ * @suspend: Notifies functions when the host stops sending USB traffic.
+ * @resume: Notifies functions when the host restarts USB traffic.
+ *
+ * A single USB function uses one or more interfaces, and should in most
+ * cases support operation at both full and high speeds. Each function is
+ * associated by @usb_add_function() with a one configuration; that function
+ * causes @bind() to be called so resources can be allocated as part of
+ * setting up a gadget driver. Those resources include endpoints, which
+ * should be allocated using @usb_ep_autoconfig().
+ *
+ * To support dual speed operation, a function driver provides descriptors
+ * for both high and full speed operation. Except in rare cases that don't
+ * involve bulk endpoints, each speed needs different endpoint descriptors.
+ *
+ * Function drivers choose their own strategies for managing instance data.
+ * The simplest strategy just declares it "static', which means the function
+ * can only be activated once. If the function needs to be exposed in more
+ * than one configuration at a given speed, it needs to support multiple
+ * usb_function structures (one for each configuration).
+ *
+ * A more complex strategy might encapsulate a @usb_function structure inside
+ * a driver-specific instance structure to allows multiple activations. An
+ * example of multiple activations might be a CDC ACM function that supports
+ * two or more distinct instances within the same configuration, providing
+ * several independent logical data links to a USB host.
+ */
+struct usb_function {
+ const char *name;
+ struct usb_gadget_strings **strings;
+ struct usb_descriptor_header **descriptors;
+ struct usb_descriptor_header **hs_descriptors;
+
+ struct usb_configuration *config;
+
+ /* REVISIT: bind() functions can be marked __init, which
+ * makes trouble for section mismatch analysis. See if
+ * we can't restructure things to avoid mismatching.
+ * Related: unbind() may kfree() but bind() won't...
+ */
+
+ /* configuration management: bind/unbind */
+ int (*bind)(struct usb_configuration *,
+ struct usb_function *);
+ void (*unbind)(struct usb_configuration *,
+ struct usb_function *);
+
+ /* runtime state management */
+ int (*set_alt)(struct usb_function *,
+ unsigned interface, unsigned alt);
+ int (*get_alt)(struct usb_function *,
+ unsigned interface);
+ void (*disable)(struct usb_function *);
+ int (*setup)(struct usb_function *,
+ const struct usb_ctrlrequest *);
+ void (*suspend)(struct usb_function *);
+ void (*resume)(struct usb_function *);
+
+ /* private: */
+ /* internals */
+ struct list_head list;
+ DECLARE_BITMAP(endpoints, 32);
+};
+
+int usb_add_function(struct usb_configuration *, struct usb_function *);
+
+int usb_function_deactivate(struct usb_function *);
+int usb_function_activate(struct usb_function *);
+
+int usb_interface_id(struct usb_configuration *, struct usb_function *);
+
+/**
+ * ep_choose - select descriptor endpoint at current device speed
+ * @g: gadget, connected and running at some speed
+ * @hs: descriptor to use for high speed operation
+ * @fs: descriptor to use for full or low speed operation
+ */
+static inline struct usb_endpoint_descriptor *
+ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
+ struct usb_endpoint_descriptor *fs)
+{
+ if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ return hs;
+ return fs;
+}
+
+#define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */
+
+/**
+ * struct usb_configuration - represents one gadget configuration
+ * @label: For diagnostics, describes the configuration.
+ * @strings: Tables of strings, keyed by identifiers assigned during @bind()
+ * and by language IDs provided in control requests.
+ * @descriptors: Table of descriptors preceding all function descriptors.
+ * Examples include OTG and vendor-specific descriptors.
+ * @bind: Called from @usb_add_config() to allocate resources unique to this
+ * configuration and to call @usb_add_function() for each function used.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ * driver which added this configuration.
+ * @setup: Used to delegate control requests that aren't handled by standard
+ * device infrastructure or directed at a specific interface.
+ * @bConfigurationValue: Copied into configuration descriptor.
+ * @iConfiguration: Copied into configuration descriptor.
+ * @bmAttributes: Copied into configuration descriptor.
+ * @bMaxPower: Copied into configuration descriptor.
+ * @cdev: assigned by @usb_add_config() before calling @bind(); this is
+ * the device associated with this configuration.
+ *
+ * Configurations are building blocks for gadget drivers structured around
+ * function drivers. Simple USB gadgets require only one function and one
+ * configuration, and handle dual-speed hardware by always providing the same
+ * functionality. Slightly more complex gadgets may have more than one
+ * single-function configuration at a given speed; or have configurations
+ * that only work at one speed.
+ *
+ * Composite devices are, by definition, ones with configurations which
+ * include more than one function.
+ *
+ * The lifecycle of a usb_configuration includes allocation, initialization
+ * of the fields described above, and calling @usb_add_config() to set up
+ * internal data and bind it to a specific device. The configuration's
+ * @bind() method is then used to initialize all the functions and then
+ * call @usb_add_function() for them.
+ *
+ * Those functions would normally be independant of each other, but that's
+ * not mandatory. CDC WMC devices are an example where functions often
+ * depend on other functions, with some functions subsidiary to others.
+ * Such interdependency may be managed in any way, so long as all of the
+ * descriptors complete by the time the composite driver returns from
+ * its bind() routine.
+ */
+struct usb_configuration {
+ const char *label;
+ struct usb_gadget_strings **strings;
+ const struct usb_descriptor_header **descriptors;
+
+ /* REVISIT: bind() functions can be marked __init, which
+ * makes trouble for section mismatch analysis. See if
+ * we can't restructure things to avoid mismatching...
+ */
+
+ /* configuration management: bind/unbind */
+ int (*bind)(struct usb_configuration *);
+ void (*unbind)(struct usb_configuration *);
+ int (*setup)(struct usb_configuration *,
+ const struct usb_ctrlrequest *);
+
+ /* fields in the config descriptor */
+ u8 bConfigurationValue;
+ u8 iConfiguration;
+ u8 bmAttributes;
+ u8 bMaxPower;
+
+ struct usb_composite_dev *cdev;
+
+ /* private: */
+ /* internals */
+ struct list_head list;
+ struct list_head functions;
+ u8 next_interface_id;
+ unsigned highspeed:1;
+ unsigned fullspeed:1;
+ struct usb_function *interface[MAX_CONFIG_INTERFACES];
+};
+
+int usb_add_config(struct usb_composite_dev *,
+ struct usb_configuration *);
+
+/**
+ * struct usb_composite_driver - groups configurations into a gadget
+ * @name: For diagnostics, identifies the driver.
+ * @dev: Template descriptor for the device, including default device
+ * identifiers.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ * and language IDs provided in control requests
+ * @bind: (REQUIRED) Used to allocate resources that are shared across the
+ * whole device, such as string IDs, and add its configurations using
+ * @usb_add_config(). This may fail by returning a negative errno
+ * value; it should return zero on successful initialization.
+ * @unbind: Reverses @bind(); called as a side effect of unregistering
+ * this driver.
+ * @disconnect: optional driver disconnect method
+ * @suspend: Notifies when the host stops sending USB traffic,
+ * after function notifications
+ * @resume: Notifies configuration when the host restarts USB traffic,
+ * before function notifications
+ *
+ * Devices default to reporting self powered operation. Devices which rely
+ * on bus powered operation should report this in their @bind() method.
+ *
+ * Before returning from @bind, various fields in the template descriptor
+ * may be overridden. These include the idVendor/idProduct/bcdDevice values
+ * normally to bind the appropriate host side driver, and the three strings
+ * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
+ * meaningful device identifiers. (The strings will not be defined unless
+ * they are defined in @dev and @strings.) The correct ep0 maxpacket size
+ * is also reported, as defined by the underlying controller driver.
+ */
+struct usb_composite_driver {
+ const char *name;
+ const struct usb_device_descriptor *dev;
+ struct usb_gadget_strings **strings;
+
+ /* REVISIT: bind() functions can be marked __init, which
+ * makes trouble for section mismatch analysis. See if
+ * we can't restructure things to avoid mismatching...
+ */
+
+ int (*bind)(struct usb_composite_dev *);
+ int (*unbind)(struct usb_composite_dev *);
+
+ void (*disconnect)(struct usb_composite_dev *);
+
+ /* global suspend hooks */
+ void (*suspend)(struct usb_composite_dev *);
+ void (*resume)(struct usb_composite_dev *);
+};
+
+extern int usb_composite_register(struct usb_composite_driver *);
+extern void usb_composite_unregister(struct usb_composite_driver *);
+
+
+/**
+ * struct usb_composite_device - represents one composite usb gadget
+ * @gadget: read-only, abstracts the gadget's usb peripheral controller
+ * @req: used for control responses; buffer is pre-allocated
+ * @bufsiz: size of buffer pre-allocated in @req
+ * @config: the currently active configuration
+ *
+ * One of these devices is allocated and initialized before the
+ * associated device driver's bind() is called.
+ *
+ * OPEN ISSUE: it appears that some WUSB devices will need to be
+ * built by combining a normal (wired) gadget with a wireless one.
+ * This revision of the gadget framework should probably try to make
+ * sure doing that won't hurt too much.
+ *
+ * One notion for how to handle Wireless USB devices involves:
+ * (a) a second gadget here, discovery mechanism TBD, but likely
+ * needing separate "register/unregister WUSB gadget" calls;
+ * (b) updates to usb_gadget to include flags "is it wireless",
+ * "is it wired", plus (presumably in a wrapper structure)
+ * bandgroup and PHY info;
+ * (c) presumably a wireless_ep wrapping a usb_ep, and reporting
+ * wireless-specific parameters like maxburst and maxsequence;
+ * (d) configurations that are specific to wireless links;
+ * (e) function drivers that understand wireless configs and will
+ * support wireless for (additional) function instances;
+ * (f) a function to support association setup (like CBAF), not
+ * necessarily requiring a wireless adapter;
+ * (g) composite device setup that can create one or more wireless
+ * configs, including appropriate association setup support;
+ * (h) more, TBD.
+ */
+struct usb_composite_dev {
+ struct usb_gadget *gadget;
+ struct usb_request *req;
+ unsigned bufsiz;
+
+ struct usb_configuration *config;
+
+ /* private: */
+ /* internals */
+ unsigned int suspended:1;
+ struct usb_device_descriptor __aligned(CONFIG_SYS_CACHELINE_SIZE) desc;
+ struct list_head configs;
+ struct usb_composite_driver *driver;
+ u8 next_string_id;
+
+ /* the gadget driver won't enable the data pullup
+ * while the deactivation count is nonzero.
+ */
+ unsigned deactivations;
+};
+
+extern int usb_string_id(struct usb_composite_dev *c);
+extern int usb_string_ids_tab(struct usb_composite_dev *c,
+ struct usb_string *str);
+extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
+
+#endif /* __LINUX_USB_COMPOSITE_H */
Code Review / kvmfornfv.git / blobdiff