Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / include / linux / mtd / mtd.h
diff --git a/qemu/roms/u-boot/include/linux/mtd/mtd.h b/qemu/roms/u-boot/include/linux/mtd/mtd.h
new file mode 100644 (file)
index 0000000..a65b681
--- /dev/null
@@ -0,0 +1,388 @@
+/*
+ * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * Released under GPL
+ */
+
+#ifndef __MTD_MTD_H__
+#define __MTD_MTD_H__
+
+#include <linux/types.h>
+#include <div64.h>
+#include <mtd/mtd-abi.h>
+#include <asm/errno.h>
+
+#define MTD_CHAR_MAJOR 90
+#define MTD_BLOCK_MAJOR 31
+#define MAX_MTD_DEVICES 32
+
+#define MTD_ERASE_PENDING      0x01
+#define MTD_ERASING            0x02
+#define MTD_ERASE_SUSPEND      0x04
+#define MTD_ERASE_DONE          0x08
+#define MTD_ERASE_FAILED        0x10
+
+#define MTD_FAIL_ADDR_UNKNOWN  -1LL
+
+/*
+ * Enumeration for NAND/OneNAND flash chip state
+ */
+enum {
+       FL_READY,
+       FL_READING,
+       FL_WRITING,
+       FL_ERASING,
+       FL_SYNCING,
+       FL_CACHEDPRG,
+       FL_RESETING,
+       FL_UNLOCKING,
+       FL_LOCKING,
+       FL_PM_SUSPENDED,
+};
+
+/* If the erase fails, fail_addr might indicate exactly which block failed.  If
+   fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level or was not
+   specific to any particular block. */
+struct erase_info {
+       struct mtd_info *mtd;
+       uint64_t addr;
+       uint64_t len;
+       uint64_t fail_addr;
+       u_long time;
+       u_long retries;
+       u_int dev;
+       u_int cell;
+       void (*callback) (struct erase_info *self);
+       u_long priv;
+       u_char state;
+       struct erase_info *next;
+       int scrub;
+};
+
+struct mtd_erase_region_info {
+       uint64_t offset;                        /* At which this region starts, from the beginning of the MTD */
+       u_int32_t erasesize;            /* For this region */
+       u_int32_t numblocks;            /* Number of blocks of erasesize in this region */
+       unsigned long *lockmap;         /* If keeping bitmap of locks */
+};
+
+/**
+ * struct mtd_oob_ops - oob operation operands
+ * @mode:      operation mode
+ *
+ * @len:       number of data bytes to write/read
+ *
+ * @retlen:    number of data bytes written/read
+ *
+ * @ooblen:    number of oob bytes to write/read
+ * @oobretlen: number of oob bytes written/read
+ * @ooboffs:   offset of oob data in the oob area (only relevant when
+ *             mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
+ * @datbuf:    data buffer - if NULL only oob data are read/written
+ * @oobbuf:    oob data buffer
+ *
+ * Note, it is allowed to read more then one OOB area at one go, but not write.
+ * The interface assumes that the OOB write requests program only one page's
+ * OOB area.
+ */
+struct mtd_oob_ops {
+       unsigned int    mode;
+       size_t          len;
+       size_t          retlen;
+       size_t          ooblen;
+       size_t          oobretlen;
+       uint32_t        ooboffs;
+       uint8_t         *datbuf;
+       uint8_t         *oobbuf;
+};
+
+#ifdef CONFIG_SYS_NAND_MAX_OOBFREE
+#define MTD_MAX_OOBFREE_ENTRIES_LARGE  CONFIG_SYS_NAND_MAX_OOBFREE
+#else
+#define MTD_MAX_OOBFREE_ENTRIES_LARGE  32
+#endif
+
+#ifdef CONFIG_SYS_NAND_MAX_ECCPOS
+#define MTD_MAX_ECCPOS_ENTRIES_LARGE   CONFIG_SYS_NAND_MAX_ECCPOS
+#else
+#define MTD_MAX_ECCPOS_ENTRIES_LARGE   640
+#endif
+
+/*
+ * ECC layout control structure. Exported to userspace for
+ * diagnosis and to allow creation of raw images
+ */
+struct nand_ecclayout {
+       uint32_t eccbytes;
+       uint32_t eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
+       uint32_t oobavail;
+       struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
+};
+
+struct mtd_info {
+       u_char type;
+       u_int32_t flags;
+       uint64_t size;   /* Total size of the MTD */
+
+       /* "Major" erase size for the device. Naïve users may take this
+        * to be the only erase size available, or may use the more detailed
+        * information below if they desire
+        */
+       u_int32_t erasesize;
+       /* Minimal writable flash unit size. In case of NOR flash it is 1 (even
+        * though individual bits can be cleared), in case of NAND flash it is
+        * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
+        * it is of ECC block size, etc. It is illegal to have writesize = 0.
+        * Any driver registering a struct mtd_info must ensure a writesize of
+        * 1 or larger.
+        */
+       u_int32_t writesize;
+
+       u_int32_t oobsize;   /* Amount of OOB data per block (e.g. 16) */
+       u_int32_t oobavail;  /* Available OOB bytes per block */
+
+       /*
+        * read ops return -EUCLEAN if max number of bitflips corrected on any
+        * one region comprising an ecc step equals or exceeds this value.
+        * Settable by driver, else defaults to ecc_strength.  User can override
+        * in sysfs.  N.B. The meaning of the -EUCLEAN return code has changed;
+        * see Documentation/ABI/testing/sysfs-class-mtd for more detail.
+        */
+       unsigned int bitflip_threshold;
+
+       /* Kernel-only stuff starts here. */
+       const char *name;
+       int index;
+
+       /* ECC layout structure pointer - read only! */
+       struct nand_ecclayout *ecclayout;
+
+       /* max number of correctible bit errors per ecc step */
+       unsigned int ecc_strength;
+
+       /* Data for variable erase regions. If numeraseregions is zero,
+        * it means that the whole device has erasesize as given above.
+        */
+       int numeraseregions;
+       struct mtd_erase_region_info *eraseregions;
+
+       /*
+        * Do not call via these pointers, use corresponding mtd_*()
+        * wrappers instead.
+        */
+       int (*_erase) (struct mtd_info *mtd, struct erase_info *instr);
+       int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
+                       size_t *retlen, void **virt, phys_addr_t *phys);
+       void (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
+       int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
+                    size_t *retlen, u_char *buf);
+       int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
+                     size_t *retlen, const u_char *buf);
+
+       /* In blackbox flight recorder like scenarios we want to make successful
+          writes in interrupt context. panic_write() is only intended to be
+          called when its known the kernel is about to panic and we need the
+          write to succeed. Since the kernel is not going to be running for much
+          longer, this function can break locks and delay to ensure the write
+          succeeds (but not sleep). */
+
+       int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+
+       int (*_read_oob) (struct mtd_info *mtd, loff_t from,
+                        struct mtd_oob_ops *ops);
+       int (*_write_oob) (struct mtd_info *mtd, loff_t to,
+                        struct mtd_oob_ops *ops);
+       int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
+                                  size_t len);
+       int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
+                                  size_t len, size_t *retlen, u_char *buf);
+       int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
+                                  size_t len);
+       int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
+                                  size_t len, size_t *retlen, u_char *buf);
+       int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to, size_t len,
+                                   size_t *retlen, u_char *buf);
+       int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from,
+                                  size_t len);
+       void (*_sync) (struct mtd_info *mtd);
+       int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+       int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+       int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
+       int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
+       /*
+        * If the driver is something smart, like UBI, it may need to maintain
+        * its own reference counting. The below functions are only for driver.
+        */
+       int (*_get_device) (struct mtd_info *mtd);
+       void (*_put_device) (struct mtd_info *mtd);
+
+/* XXX U-BOOT XXX */
+#if 0
+       /* kvec-based read/write methods.
+          NB: The 'count' parameter is the number of _vectors_, each of
+          which contains an (ofs, len) tuple.
+       */
+       int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
+#endif
+/* XXX U-BOOT XXX */
+#if 0
+       struct notifier_block reboot_notifier;  /* default mode before reboot */
+#endif
+
+       /* ECC status information */
+       struct mtd_ecc_stats ecc_stats;
+       /* Subpage shift (NAND) */
+       int subpage_sft;
+
+       void *priv;
+
+       struct module *owner;
+       int usecount;
+};
+
+int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
+int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+            u_char *buf);
+int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+             const u_char *buf);
+int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+                   const u_char *buf);
+
+int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops);
+
+static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
+                               struct mtd_oob_ops *ops)
+{
+       ops->retlen = ops->oobretlen = 0;
+       if (!mtd->_write_oob)
+               return -EOPNOTSUPP;
+       if (!(mtd->flags & MTD_WRITEABLE))
+               return -EROFS;
+       return mtd->_write_oob(mtd, to, ops);
+}
+
+int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+                          size_t len);
+int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+                          size_t *retlen, u_char *buf);
+int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+                          size_t len);
+int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+                          size_t *retlen, u_char *buf);
+int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
+                           size_t *retlen, u_char *buf);
+int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);
+
+/* XXX U-BOOT XXX */
+#if 0
+int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+              unsigned long count, loff_t to, size_t *retlen);
+#endif
+
+static inline void mtd_sync(struct mtd_info *mtd)
+{
+       if (mtd->_sync)
+               mtd->_sync(mtd);
+}
+
+int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
+int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
+
+static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
+{
+       do_div(sz, mtd->erasesize);
+       return sz;
+}
+
+static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
+{
+       return do_div(sz, mtd->erasesize);
+}
+
+static inline int mtd_has_oob(const struct mtd_info *mtd)
+{
+       return mtd->_read_oob && mtd->_write_oob;
+}
+
+static inline int mtd_can_have_bb(const struct mtd_info *mtd)
+{
+       return !!mtd->_block_isbad;
+}
+
+       /* Kernel-side ioctl definitions */
+
+extern int add_mtd_device(struct mtd_info *mtd);
+extern int del_mtd_device (struct mtd_info *mtd);
+
+extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+extern struct mtd_info *get_mtd_device_nm(const char *name);
+
+extern void put_mtd_device(struct mtd_info *mtd);
+extern void mtd_get_len_incl_bad(struct mtd_info *mtd, uint64_t offset,
+                                const uint64_t length, uint64_t *len_incl_bad,
+                                int *truncated);
+/* XXX U-BOOT XXX */
+#if 0
+struct mtd_notifier {
+       void (*add)(struct mtd_info *mtd);
+       void (*remove)(struct mtd_info *mtd);
+       struct list_head list;
+};
+
+extern void register_mtd_user (struct mtd_notifier *new);
+extern int unregister_mtd_user (struct mtd_notifier *old);
+#endif
+
+#ifdef CONFIG_MTD_PARTITIONS
+void mtd_erase_callback(struct erase_info *instr);
+#else
+static inline void mtd_erase_callback(struct erase_info *instr)
+{
+       if (instr->callback)
+               instr->callback(instr);
+}
+#endif
+
+/*
+ * Debugging macro and defines
+ */
+#define MTD_DEBUG_LEVEL0       (0)     /* Quiet   */
+#define MTD_DEBUG_LEVEL1       (1)     /* Audible */
+#define MTD_DEBUG_LEVEL2       (2)     /* Loud    */
+#define MTD_DEBUG_LEVEL3       (3)     /* Noisy   */
+
+#ifdef CONFIG_MTD_DEBUG
+#define pr_debug(args...)      MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+#define MTDDEBUG(n, args...)                           \
+       do {                                            \
+               if (n <= CONFIG_MTD_DEBUG_VERBOSE)      \
+                       printk(KERN_INFO args);         \
+       } while(0)
+#else /* CONFIG_MTD_DEBUG */
+#define pr_debug(args...)
+#define MTDDEBUG(n, args...)                           \
+       do {                                            \
+               if (0)                                  \
+                       printk(KERN_INFO args);         \
+       } while(0)
+#endif /* CONFIG_MTD_DEBUG */
+#define pr_info(args...)       MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+#define pr_warn(args...)       MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+#define pr_err(args...)                MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+
+static inline int mtd_is_bitflip(int err) {
+       return err == -EUCLEAN;
+}
+
+static inline int mtd_is_eccerr(int err) {
+       return err == -EBADMSG;
+}
+
+static inline int mtd_is_bitflip_or_eccerr(int err) {
+       return mtd_is_bitflip(err) || mtd_is_eccerr(err);
+}
+
+#endif /* __MTD_MTD_H__ */