Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / include / i2s.h
diff --git a/qemu/roms/u-boot/include/i2s.h b/qemu/roms/u-boot/include/i2s.h
new file mode 100644 (file)
index 0000000..8dd2cc3
--- /dev/null
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __I2S_H__
+#define __I2S_H__
+
+/*
+ * DAI hardware audio formats.
+ *
+ * Describes the physical PCM data formating and clocking. Add new formats
+ * to the end.
+ */
+#define SND_SOC_DAIFMT_I2S             1 /* I2S mode */
+#define SND_SOC_DAIFMT_RIGHT_J         2 /* Right Justified mode */
+#define SND_SOC_DAIFMT_LEFT_J          3 /* Left Justified mode */
+#define SND_SOC_DAIFMT_DSP_A           4 /* L data MSB after FRM LRC */
+#define SND_SOC_DAIFMT_DSP_B           5 /* L data MSB during FRM LRC */
+#define SND_SOC_DAIFMT_AC97            6 /* AC97 */
+#define SND_SOC_DAIFMT_PDM             7 /* Pulse density modulation */
+
+/* left and right justified also known as MSB and LSB respectively */
+#define SND_SOC_DAIFMT_MSB             SND_SOC_DAIFMT_LEFT_J
+#define SND_SOC_DAIFMT_LSB             SND_SOC_DAIFMT_RIGHT_J
+
+/*
+ * DAI hardware signal inversions.
+ *
+ * Specifies whether the DAI can also support inverted clocks for the specified
+ * format.
+ */
+#define SND_SOC_DAIFMT_NB_NF   (1 << 8) /* normal bit clock + frame */
+#define SND_SOC_DAIFMT_NB_IF   (2 << 8) /* normal BCLK + inv FRM */
+#define SND_SOC_DAIFMT_IB_NF   (3 << 8) /* invert BCLK + nor FRM */
+#define SND_SOC_DAIFMT_IB_IF   (4 << 8) /* invert BCLK + FRM */
+
+/*
+ * DAI hardware clock masters.
+ *
+ * This is wrt the codec, the inverse is true for the interface
+ * i.e. if the codec is clk and FRM master then the interface is
+ * clk and frame slave.
+ */
+#define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & FRM master */
+#define SND_SOC_DAIFMT_CBS_CFM (2 << 12) /* codec clk slave & FRM master */
+#define SND_SOC_DAIFMT_CBM_CFS (3 << 12) /* codec clk master & frame slave */
+#define SND_SOC_DAIFMT_CBS_CFS (4 << 12) /* codec clk & FRM slave */
+
+#define SND_SOC_DAIFMT_FORMAT_MASK     0x000f
+#define SND_SOC_DAIFMT_CLOCK_MASK      0x00f0
+#define SND_SOC_DAIFMT_INV_MASK                0x0f00
+#define SND_SOC_DAIFMT_MASTER_MASK     0xf000
+
+/*
+ * Master Clock Directions
+ */
+#define SND_SOC_CLOCK_IN               0
+#define SND_SOC_CLOCK_OUT              1
+
+/* I2S Tx Control */
+#define I2S_TX_ON      1
+#define I2S_TX_OFF     0
+
+#define FIFO_LENGTH    64
+
+/* I2s Registers */
+struct i2s_reg {
+       unsigned int con;       /* base + 0 , Control register */
+       unsigned int mod;       /* Mode register */
+       unsigned int fic;       /* FIFO control register */
+       unsigned int psr;       /* Reserved */
+       unsigned int txd;       /* Transmit data register */
+       unsigned int rxd;       /* Receive Data Register */
+};
+
+/* This structure stores the i2s related information */
+struct i2stx_info {
+       unsigned int rfs;               /* LR clock frame size */
+       unsigned int bfs;               /* Bit slock frame size */
+       unsigned int audio_pll_clk;     /* Audio pll frequency in Hz */
+       unsigned int samplingrate;      /* sampling rate */
+       unsigned int bitspersample;     /* bits per sample */
+       unsigned int channels;          /* audio channels */
+       unsigned int base_address;      /* I2S Register Base */
+       unsigned int id;                /* I2S controller id */
+};
+
+/*
+ * Sends the given data through i2s tx
+ *
+ * @param pi2s_tx      pointer of i2s transmitter parameter structure.
+ * @param data         address of the data buffer
+ * @param data_size    array size of the int buffer (total size / size of int)
+ *
+ * @return             int value 0 for success, -1 in case of error
+ */
+int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned *data,
+                               unsigned long data_size);
+
+/*
+ * Initialise i2s transmiter
+ *
+ * @param pi2s_tx      pointer of i2s transmitter parameter structure.
+ *
+ * @return             int value 0 for success, -1 in case of error
+ */
+int i2s_tx_init(struct i2stx_info *pi2s_tx);
+
+#endif /* __I2S_H__ */