Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / zmx25.h

diff --git a/qemu/roms/u-boot/include/configs/zmx25.h b/qemu/roms/u-boot/include/configs/zmx25.h
new file mode 100644 (file)
index 0000000..8ffe6f1
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/zmx25.h
@@ -0,0 +1,163 @@
+/*
+ * (c) 2011 Graf-Syteco, Matthias Weisser
+ * <weisserm@arcor.de>
+ *
+ * Configuation settings for the zmx25 board
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_ARM926EJS                       /* arm926ejs CPU core */
+#define CONFIG_MX25
+#define CONFIG_SYS_TEXT_BASE           0xA0000000
+
+#define CONFIG_SYS_TIMER_RATE          32768
+#define CONFIG_SYS_TIMER_COUNTER       \
+       (&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
+
+#define CONFIG_MACH_TYPE       MACH_TYPE_ZMX25
+/*
+ * Environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "gs_fast_boot=setenv bootdelay 5\0" \
+       "gs_slow_boot=setenv bootdelay 10\0" \
+       "bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \
+               "fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \
+               "bootm 0x81000000; bootelf 0x81000000\0"
+
+#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs      */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_BOARD_LATE_INIT
+
+/*
+ * Compressions
+ */
+#define CONFIG_LZO
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * GPIO
+ */
+#define CONFIG_MXC_GPIO
+
+/*
+ * Serial
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE   UART2_BASE
+#define CONFIG_CONS_INDEX      1       /* use UART2 for console */
+#define CONFIG_BAUDRATE                115200  /* Default baud rate */
+
+/*
+ * Ethernet
+ */
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_PHYADDR         0x00
+#define CONFIG_MII
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_CACHE
+
+/*
+ * Additional command
+ */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
+
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * USB
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI                        /* Enable EHCI USB support */
+#define CONFIG_USB_EHCI_MXC
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORT    1
+#define CONFIG_MXC_USB_PORTSC  MXC_EHCI_MODE_SERIAL
+#define CONFIG_MXC_USB_FLAGS   (MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SUPPORT_VFAT
+#endif /* CONFIG_CMD_USB */
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS   1
+#define PHYS_SDRAM             0x80000000      /* start address of LPDDRRAM */
+#define PHYS_SDRAM_SIZE                0x04000000      /* 64 megs */
+
+#define CONFIG_SYS_SDRAM_BASE  PHYS_SDRAM
+#define CONFIG_SYS_INIT_SP_ADDR        0x78020000      /* end of internal SRAM */
+
+/*
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_FLASH_BASE          0xA0000000
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_MAX_FLASH_SECT      256
+
+#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x00040000)
+#define CONFIG_ENV_IS_IN_FLASH         1
+#define CONFIG_ENV_SECT_SIZE           (128 * 1024)
+#define CONFIG_ENV_SIZE                        (128 * 1024)
+
+/*
+ * CFI FLASH driver setup
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE      /* ~10x faster */
+
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_SYS_SDRAM_BASE
+
+#define CONFIG_SYS_MEMTEST_START       (PHYS_SDRAM + (512*1024))
+#define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM + PHYS_SDRAM_SIZE)
+
+#define CONFIG_SYS_PROMPT      "zmx25> "
+#define CONFIG_SYS_CBSIZE      256
+#define CONFIG_SYS_MAXARGS     16
+#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + \
+                               sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_PREBOOT  ""
+
+#define CONFIG_BOOTDELAY       5
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
+#define CONFIG_AUTOBOOT_DELAY_STR      "delaygs"
+#define CONFIG_AUTOBOOT_STOP_STR       "stopgs"
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN          (0x400000 - 0x8000)
+
+#endif /* __CONFIG_H */