--- /dev/null
+/*
+ * Aeronix Zipit Z2 configuration file
+ *
+ * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Board Configuration Options
+ */
+#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
+#define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */
+#define CONFIG_SYS_TEXT_BASE 0x0
+
+#undef CONFIG_BOARD_LATE_INIT
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_PREBOOT
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_ADDR 0x40000
+#define CONFIG_ENV_SIZE 0x20000
+
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_DCACHE_OFF
+
+#define CONFIG_SYS_MALLOC_LEN (128*1024)
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_BOOTCOMMAND \
+ "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\
+ "then " \
+ "source 0xa0000000; " \
+ "else " \
+ "bootm 0x60000; " \
+ "fi; "
+#define CONFIG_BOOTARGS \
+ "console=tty0 console=ttyS2,115200 fbcon=rotate:3"
+#define CONFIG_TIMESTAMP
+#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_SYS_TEXT_BASE 0x0
+#define CONFIG_LZMA /* LZMA compression support */
+
+/*
+ * Serial Console Configuration
+ * STUART - the lower serial port on Colibri board
+ */
+#define CONFIG_PXA_SERIAL
+#define CONFIG_STUART 1
+#define CONFIG_CONS_INDEX 2
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * Bootloader Components Configuration
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#define CONFIG_CMD_ENV
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_SPI
+
+/*
+ * MMC Card Configuration
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
+#define CONFIG_SYS_MMC_BASE 0xF0000000
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * SPI and LCD
+ */
+#ifdef CONFIG_CMD_SPI
+#define CONFIG_SOFT_SPI
+#define CONFIG_LCD
+#define CONFIG_PXA_LCD
+#define CONFIG_LMS283GF05
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_CMD_BMP
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
+#undef SPI_INIT
+
+#define SPI_DELAY udelay(10)
+#define SPI_SDA(val) zipitz2_spi_sda(val)
+#define SPI_SCL(val) zipitz2_spi_scl(val)
+#define SPI_READ zipitz2_spi_read()
+#ifndef __ASSEMBLY__
+void zipitz2_spi_sda(int);
+void zipitz2_spi_scl(int);
+unsigned char zipitz2_spi_read(void);
+#endif
+#endif
+
+/*
+ * KGDB
+ */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#endif
+
+/*
+ * HUSH Shell Configuration
+ */
+#define CONFIG_SYS_HUSH_PARSER 1
+
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
+#endif
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_DEVICE_NULLDEV 1
+
+/*
+ * Clock Configuration
+ */
+#undef CONFIG_SYS_CLKS_IN_HZ
+#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
+
+/*
+ * SRAM Map
+ */
+#define PHYS_SRAM 0x5c000000 /* SRAM Bank #1 */
+#define PHYS_SRAM_SIZE 0x00040000 /* 256k */
+
+/*
+ * DRAM Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
+
+#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
+#define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */
+
+#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048)
+
+/*
+ * NOR FLASH
+ */
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
+#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+
+#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 240000
+#define CONFIG_SYS_FLASH_LOCK_TOUT 240000
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000
+#define CONFIG_SYS_FLASH_PROTECTION
+
+/*
+ * GPIO settings
+ */
+#define CONFIG_SYS_GAFR0_L_VAL 0x02000140
+#define CONFIG_SYS_GAFR0_U_VAL 0x59188000
+#define CONFIG_SYS_GAFR1_L_VAL 0x63900002
+#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950
+#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa
+#define CONFIG_SYS_GAFR2_U_VAL 0x29000308
+#define CONFIG_SYS_GAFR3_L_VAL 0x54000000
+#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5
+#define CONFIG_SYS_GPCR0_VAL 0x00000000
+#define CONFIG_SYS_GPCR1_VAL 0x00000020
+#define CONFIG_SYS_GPCR2_VAL 0x00000000
+#define CONFIG_SYS_GPCR3_VAL 0x00000000
+#define CONFIG_SYS_GPDR0_VAL 0xdafcee00
+#define CONFIG_SYS_GPDR1_VAL 0xffa3aaab
+#define CONFIG_SYS_GPDR2_VAL 0x8fe9ffff
+#define CONFIG_SYS_GPDR3_VAL 0x001b1f8a
+#define CONFIG_SYS_GPSR0_VAL 0x06080400
+#define CONFIG_SYS_GPSR1_VAL 0x007f0000
+#define CONFIG_SYS_GPSR2_VAL 0x032a0000
+#define CONFIG_SYS_GPSR3_VAL 0x00000180
+
+#define CONFIG_SYS_PSSR_VAL 0x30
+
+/*
+ * Clock settings
+ */
+#define CONFIG_SYS_CKEN 0x00511220
+#define CONFIG_SYS_CCCR 0x00000190
+
+/*
+ * Memory settings
+ */
+#define CONFIG_SYS_MSC0_VAL 0x2ffc38f8
+#define CONFIG_SYS_MSC1_VAL 0x0000ccd1
+#define CONFIG_SYS_MSC2_VAL 0x0000b884
+#define CONFIG_SYS_MDCNFG_VAL 0x08000ba9
+#define CONFIG_SYS_MDREFR_VAL 0x2011a01e
+#define CONFIG_SYS_MDMRS_VAL 0x00000000
+#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
+#define CONFIG_SYS_SXCNFG_VAL 0x40044004
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CONFIG_SYS_MECR_VAL 0x00000001
+#define CONFIG_SYS_MCMEM0_VAL 0x00014307
+#define CONFIG_SYS_MCMEM1_VAL 0x00014307
+#define CONFIG_SYS_MCATT0_VAL 0x0001c787
+#define CONFIG_SYS_MCATT1_VAL 0x0001c787
+#define CONFIG_SYS_MCIO0_VAL 0x0001430f
+#define CONFIG_SYS_MCIO1_VAL 0x0001430f
+
+#endif /* __CONFIG_H */
Code Review / kvmfornfv.git / blobdiff