Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / xilinx-ppc.h

diff --git a/qemu/roms/u-boot/include/configs/xilinx-ppc.h b/qemu/roms/u-boot/include/configs/xilinx-ppc.h
new file mode 100644 (file)
index 0000000..0ccd73a
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/xilinx-ppc.h
@@ -0,0 +1,126 @@
+/*
+ * (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *
+ *  (C) Copyright 2008
+ *  Georg Schardt <schardt@team-ctech.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+*/
+
+#ifndef __CONFIG_XLX_H
+#define __CONFIG_XLX_H
+/*
+#define DEBUG
+#define ET_DEBUG
+*/
+
+/*Mem Map*/
+#define CONFIG_SYS_SDRAM_BASE          0x0
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN         (192 * 1024)
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128 * 1024)
+
+/*Cmd*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_REGINFO
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_MTDPARTS
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_NFS
+
+/*Misc*/
+#define CONFIG_BOOTDELAY               5/* autoboot after 5 seconds     */
+#define CONFIG_SYS_LONGHELP            /* undef to save memory         */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE              1024/* Console I/O Buffer Size      */
+#else
+#define CONFIG_SYS_CBSIZE              256/* Console I/O Buffer Size      */
+#endif
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE +\
+                                       sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS             16
+                                       /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
+                                       /* Boot Argument Buffer Size */
+#define CONFIG_SYS_MEMTEST_START       0x00400000
+                                       /* memtest works on           */
+#define CONFIG_SYS_MEMTEST_END         0x00C00000
+                                       /* 4 ... 12 MB in DRAM        */
+#define CONFIG_SYS_LOAD_ADDR           0x00400000
+                                       /* default load address       */
+#define CONFIG_SYS_EXTBDINFO           1
+                                       /* Extended board_into (bd_t) */
+                                       /* decrementer freq: 1 ms ticks */
+#define CONFIG_CMDLINE_EDITING         /* add command line history     */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
+#define CONFIG_LOOPW                   /* enable loopw command         */
+#define CONFIG_MX_CYCLIC               /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE                /* include version env variable */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup */
+#define CONFIG_SYS_HUSH_PARSER         /* Use the HUSH parser          */
+#define CONFIG_LOADS_ECHO              /* echo on for serial download  */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change        */
+#define CONFIG_SYS_BOOTMAPSZ           (8 << 20)
+                               /* Initial Memory map for Linux */
+
+/*Stack*/
+#define CONFIG_SYS_INIT_RAM_ADDR       0x800000/* Initial RAM address    */
+#define CONFIG_SYS_INIT_RAM_SIZE               0x2000  /* Size of used area in RAM  */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE \
+                               - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+/*Speed*/
+#define CONFIG_SYS_CLK_FREQ    XPAR_CORE_CLOCK_FREQ_HZ
+
+/*Flash*/
+#ifdef XPAR_FLASH_MEM0_BASEADDR
+#define        CONFIG_SYS_FLASH_BASE           XPAR_FLASH_MEM0_BASEADDR
+#define        CONFIG_SYS_FLASH_CFI            1
+#define        CONFIG_FLASH_CFI_DRIVER 1
+#define        CONFIG_SYS_FLASH_EMPTY_INFO     1
+#define        CONFIG_SYS_MAX_FLASH_BANKS      1
+#define        CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+/* serial communication */
+#ifdef XPAR_UARTLITE_0_BASEADDR
+#define CONFIG_XILINX_UARTLITE
+#define XILINX_UARTLITE_BASEADDR       XPAR_UARTLITE_0_BASEADDR
+#define CONFIG_BAUDRATE                        XPAR_UARTLITE_0_BAUDRATE
+#define CONFIG_SYS_BAUDRATE_TABLE      { CONFIG_BAUDRATE }
+#else
+#ifdef XPAR_UARTNS550_0_BASEADDR
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    4
+#define CONFIG_CONS_INDEX              1
+#define CONFIG_SYS_NS16550_COM1                XPAR_UARTNS550_0_BASEADDR
+#define CONFIG_SYS_NS16550_CLK         XPAR_UARTNS550_0_CLOCK_FREQ_HZ
+#define CONFIG_BAUDRATE                        115200
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 115200 }
+#endif
+#endif
+
+#endif                                         /* __CONFIG_H */