--- /dev/null
+/*
+ * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * This file contains the configuration parameters for the VCT board
+ * family:
+ *
+ * vct_premium
+ * vct_premium_small
+ * vct_premium_onenand
+ * vct_premium_onenand_small
+ * vct_platinum
+ * vct_platinum_small
+ * vct_platinum_onenand
+ * vct_platinum_onenand_small
+ * vct_platinumavc
+ * vct_platinumavc_small
+ * vct_platinumavc_onenand
+ * vct_platinumavc_onenand_small
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */
+#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2)
+
+#define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (256 << 10)
+#define CONFIG_SYS_MALLOC_LEN (1 << 20)
+#define CONFIG_SYS_BOOTPARAMS_LEN (128 << 10)
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+
+#if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND)
+#define CONFIG_VCT_NOR
+#else
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+/*
+ * UART
+ */
+#ifdef CONFIG_VCT_PLATINUMAVC
+#define UART_1_BASE 0xBDC30000
+#else
+#define UART_1_BASE 0xBF89C000
+#endif
+
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550_COM1 UART_1_BASE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_CLK 921600
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * SDRAM
+ */
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_MBYTES_SDRAM 128
+#define CONFIG_SYS_MEMTEST_START 0x80200000
+#define CONFIG_SYS_MEMTEST_END 0x80400000
+#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */
+
+#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
+/*
+ * SMSC91C11x Network Card
+ */
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_BASE 0x00000000
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_NET_RETRY_COUNT 20
+#endif
+
+/*
+ * Commands
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+
+/*
+ * Only Premium/Platinum have ethernet support right now
+ */
+#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
+ !defined(CONFIG_VCT_SMALL_IMAGE)
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SNTP
+#else
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#endif
+
+/*
+ * Only Premium/Platinum have USB-EHCI support right now
+ */
+#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
+ !defined(CONFIG_VCT_SMALL_IMAGE)
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#endif
+
+#if defined(CONFIG_CMD_USB)
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#define CONFIG_SUPPORT_VFAT
+
+/*
+ * USB/EHCI
+ */
+#define CONFIG_USB_EHCI /* Enable EHCI USB support */
+#define CONFIG_USB_EHCI_VCT /* on VCT platform */
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
+#endif /* CONFIG_CMD_USB */
+
+#if !defined(CONFIG_VCT_NOR)
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#endif
+
+#if defined(CONFIG_VCT_NAND)
+#define CONFIG_CMD_NAND
+#endif
+
+#if defined(CONFIG_VCT_ONENAND)
+#define CONFIG_CMD_ONENAND
+#endif
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_SUBNETMASK
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "VCT# " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+#define CONFIG_CMDLINE_EDITING /* add command line history */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/
+
+/*
+ * FLASH and environment organization
+ */
+#if defined(CONFIG_VCT_NOR)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_FLASH_NOT_MEM_MAPPED
+
+/*
+ * We need special accessor functions for the CFI FLASH driver. This
+ * can be enabled via the CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS option.
+ */
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+
+/*
+ * For the non-memory-mapped NOR FLASH, we need to define the
+ * NOR FLASH area. This can't be detected via the addr2info()
+ * function, since we check for flash access in the very early
+ * U-Boot code, before the NOR FLASH is detected.
+ */
+#define CONFIG_FLASH_BASE 0xb0000000
+#define CONFIG_FLASH_END 0xbfffffff
+
+/*
+ * CFI driver settings
+ */
+#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
+#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */
+
+#define CONFIG_SYS_FLASH_BASE 0xb0000000
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
+#endif /* CONFIG_VCT_NOR */
+
+#if defined(CONFIG_VCT_ONENAND)
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_ENV_IS_IN_ONENAND
+#define CONFIG_SYS_ONENAND_BASE 0x00000000 /* this is not real address */
+#define CONFIG_SYS_FLASH_BASE 0x00000000
+#define CONFIG_ENV_ADDR (128 << 10) /* after compr. U-Boot image */
+#define CONFIG_ENV_SIZE (128 << 10) /* erase size */
+#endif /* CONFIG_VCT_ONENAND */
+
+/*
+ * Cache Configuration
+ */
+#define CONFIG_SYS_DCACHE_SIZE 16384
+#define CONFIG_SYS_ICACHE_SIZE 16384
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+/*
+ * I2C/EEPROM
+ */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED 83000 /* 83 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7f
+
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define CONFIG_SYS_GPIO_I2C_SCL 11
+#define CONFIG_SYS_GPIO_I2C_SDA 10
+
+#ifndef __ASSEMBLY__
+int vct_gpio_dir(int pin, int dir);
+void vct_gpio_set(int pin, int val);
+int vct_gpio_get(int pin);
+#endif
+
+#define I2C_INIT vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SCL, 1)
+#define I2C_ACTIVE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 1)
+#define I2C_TRISTATE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 0)
+#define I2C_READ vct_gpio_get(CONFIG_SYS_GPIO_I2C_SDA)
+#define I2C_SDA(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SDA, bit)
+#define I2C_SCL(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SCL, bit)
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+/* CAT24WC32 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */
+ /* 32 byte page write mode using*/
+ /* last 5 bits of the address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+#define CONFIG_BOOTCOMMAND "run test3"
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+/*
+ * UBI configuration
+ */
+#if defined(CONFIG_VCT_ONENAND)
+#define CONFIG_SYS_USE_UBI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_UBI
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+
+#define MTDIDS_DEFAULT "onenand0=onenand"
+#define MTDPARTS_DEFAULT "mtdparts=onenand:128k(u-boot)," \
+ "128k(env)," \
+ "20m(kernel)," \
+ "-(rootfs)"
+#endif
+
+/*
+ * We need a small, stripped down image to fit into the first 128k OneNAND
+ * erase block (gzipped). This image only needs basic commands for FLASH
+ * (NOR/OneNAND) usage and Linux kernel booting.
+ */
+#if defined(CONFIG_VCT_SMALL_IMAGE)
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_CACHE
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_CRC32
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_ITEST
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADY
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_REGINFO
+#undef CONFIG_CMD_SNTP
+#undef CONFIG_CMD_SOURCE
+#undef CONFIG_CMD_STRINGS
+#undef CONFIG_CMD_TERMINAL
+#undef CONFIG_CMD_USB
+
+#undef CONFIG_SMC911X
+#undef CONFIG_SYS_I2C_SOFT
+#undef CONFIG_SOURCE
+#undef CONFIG_SYS_LONGHELP
+#undef CONFIG_TIMESTAMP
+#endif /* CONFIG_VCT_SMALL_IMAGE */
+
+#endif /* __CONFIG_H */
Code Review / kvmfornfv.git / blobdiff