Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / uc101.h

diff --git a/qemu/roms/u-boot/include/configs/uc101.h b/qemu/roms/u-boot/include/configs/uc101.h
new file mode 100644 (file)
index 0000000..f93dea7
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/uc101.h
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2003-2009
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_UC101           1       /* UC101 board          */
+#define CONFIG_HOSTNAME                uc101
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xFFF00000
+#endif
+#define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds"
+
+#include "manroland/common.h"
+#include "manroland/mpc5200-common.h"
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_BAUDRATE                115200  /* ... at 115200 bps    */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Flash configuration
+ */
+#define CONFIG_SYS_MAX_FLASH_SECT      140
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_SECT_SIZE   0x10000
+
+/*
+ * Memory map
+ */
+#define        CONFIG_SYS_IB_MASTER            0xc0510000      /* CS 6 */
+#define CONFIG_SYS_IB_EPLD             0xc0500000      /* CS 7 */
+
+/* SRAM */
+#define CONFIG_SYS_SRAM_SIZE   0x200000
+
+/*
+ * GPIO configuration
+ */
+#define CONFIG_SYS_GPS_PORT_CONFIG     0x4d558044
+
+#define CONFIG_SYS_MEMTEST_START       0x00300000
+#define CONFIG_SYS_MEMTEST_END         0x00f00000
+
+#define CONFIG_SYS_LOAD_ADDR           0x300000
+
+#define CONFIG_SYS_BOOTCS_CFG          0x00045D00
+
+/* 8Mbit SRAM @0x80100000 */
+#define CONFIG_SYS_CS1_SIZE            0x00200000
+#define CONFIG_SYS_CS1_CFG             0x21D00
+
+/* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */
+#define CONFIG_SYS_CS3_START           CONFIG_SYS_DISPLAY_BASE
+#define CONFIG_SYS_CS3_SIZE            0x00000100
+#define CONFIG_SYS_CS3_CFG             0x00081802
+
+/* Interbus Master 16 Bit */
+#define CONFIG_SYS_CS6_START           CONFIG_SYS_IB_MASTER
+#define CONFIG_SYS_CS6_SIZE            0x00010000
+#define CONFIG_SYS_CS6_CFG             0x00FF3500
+
+/* Interbus EPLD 8 Bit */
+#define CONFIG_SYS_CS7_START           CONFIG_SYS_IB_EPLD
+#define CONFIG_SYS_CS7_SIZE            0x00010000
+#define CONFIG_SYS_CS7_CFG             0x00081800
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_SYS_IDE_MAXDEVICE       1       /* max. 2 drives per IDE bus*/
+
+/*---------------------------------------------------------------------*/
+/* Display addresses                                                  */
+/*---------------------------------------------------------------------*/
+#define CONFIG_SYS_DISP_CHR_RAM        (CONFIG_SYS_DISPLAY_BASE + 0x38)
+#define CONFIG_SYS_DISP_CWORD          (CONFIG_SYS_DISPLAY_BASE + 0x30)
+
+#endif /* __CONFIG_H */