Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / tnetv107x_evm.h

diff --git a/qemu/roms/u-boot/include/configs/tnetv107x_evm.h b/qemu/roms/u-boot/include/configs/tnetv107x_evm.h
new file mode 100644 (file)
index 0000000..162826f
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/tnetv107x_evm.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com>
+ *
+ * Based on davinci_dvevm.h. Original Copyrights follow:
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+
+/* Architecture, CPU, etc */
+#define CONFIG_ARM1176
+#define CONFIG_TNETV107X
+#define CONFIG_TNETV107X_EVM
+#define CONFIG_TNETV107X_WATCHDOG
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_UBOOT_BASE          CONFIG_SYS_TEXT_BASE
+#define CONFIG_DISABLE_TCM
+#define CONFIG_PERIPORT_REMAP
+#define CONFIG_PERIPORT_BASE           0x2000000
+#define CONFIG_PERIPORT_SIZE           0x10
+#define CONFIG_SYS_CLK_FREQ            clk_get_rate(TNETV107X_LPSC_ARM)
+
+#define CONFIG_SYS_TIMERBASE           TNETV107X_TIMER0_BASE
+#define CONFIG_SYS_HZ_CLOCK            clk_get_rate(TNETV107X_LPSC_TIMER0)
+
+#define CONFIG_PLL_SYS_EXT_FREQ                25000000
+#define CONFIG_PLL_TDM_EXT_FREQ                19200000
+#define CONFIG_PLL_ETH_EXT_FREQ                25000000
+
+/* Memory Info */
+#define CONFIG_SYS_MALLOC_LEN          (0x10000 + 1*1024*1024)
+#define PHYS_SDRAM_1                   TNETV107X_DDR_EMIF_DATA_BASE
+#define PHYS_SDRAM_1_SIZE              0x04000000
+#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM_1
+#define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_1 + 16*1024*1024)
+#define CONFIG_NR_DRAM_BANKS           1
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
+
+/* Serial Driver Info */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    -4
+#define CONFIG_SYS_NS16550_COM1                TNETV107X_UART1_BASE
+#define CONFIG_SYS_NS16550_CLK         clk_get_rate(TNETV107X_LPSC_UART1)
+#define CONFIG_CONS_INDEX              1
+#define CONFIG_BAUDRATE                        115200
+
+/* Flash and environment info */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_NAND_DAVINCI
+#define CONFIG_ENV_SIZE                        (SZ_128K)
+#define CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_NAND_1BIT_ECC
+#define CONFIG_SYS_NAND_CS             2
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_BASE           TNETV107X_ASYNC_EMIF_DATA_CE0_BASE
+#define CONFIG_SYS_NAND_MASK_CLE               0x10
+#define CONFIG_SYS_NAND_MASK_ALE               0x8
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_JFFS2_NAND
+#define CONFIG_ENV_OFFSET              0x180000
+
+/*
+ * davinci_nand is a bit of a misnomer since this particular EMIF block is
+ * commonly used across multiple TI devices.  Unfortunately, this misnomer
+ * (amongst others) carries forward into the kernel too.  Consequently, if we
+ * use a different device name here, the mtdparts variable won't be usable as
+ * a kernel command-line argument.
+ */
+#define MTDIDS_DEFAULT                 "nand0=davinci_nand.0"
+#define MTDPARTS_DEFAULT               "mtdparts=davinci_nand.0:"      \
+                                               "1536k(uboot)ro,"       \
+                                               "128k(params)ro,"       \
+                                               "4m(kernel),"           \
+                                               "-(filesystem)"
+
+/* General U-Boot configuration */
+#define CONFIG_BOOTFILE                        "uImage"
+#define CONFIG_SYS_PROMPT              "U-Boot > "
+#define CONFIG_SYS_CBSIZE              1024
+#define CONFIG_SYS_MAXARGS             64
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE +            \
+                                        sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_MEMTEST_START +     \
+                                        0x700000)
+#define LINUX_BOOT_PARAM_ADDR          (CONFIG_SYS_MEMTEST_START + 0x100)
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS                        "mem=32M console=ttyS1,115200n8 " \
+                                       "root=/dev/mmcblk0p1 rw noinitrd"
+#define CONFIG_BOOTCOMMAND             ""
+#define CONFIG_BOOTDELAY               1
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EDITENV
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_ITEST
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+
+#endif /* __CONFIG_H */