Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / tk71.h

diff --git a/qemu/roms/u-boot/include/configs/tk71.h b/qemu/roms/u-boot/include/configs/tk71.h
new file mode 100644 (file)
index 0000000..16e8a7f
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/tk71.h
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_TK71_H__
+#define __CONFIG_TK71_H__
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING    "\nKa-Ro TK71"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131        1       /* CPU Core subversion */
+#define CONFIG_KIRKWOOD                1       /* SOC Family Name */
+#define CONFIG_KW88F6281       1       /* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
+#define CONFIG_NR_DRAM_BANKS   1
+
+#define MACH_TYPE_TK71         2399
+#define CONFIG_MACH_TYPE       MACH_TYPE_TK71
+
+/*
+ * Commands configuration
+ */
+#define        CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SUPPORT_VFAT
+
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ * NAND flash
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_JFFS2_NAND
+#define CONFIG_JFFS2_DEV               "nand0,3"
+#endif
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS     {1, 0}
+#define CONFIG_PHY_BASE_ADR    0x08
+#endif
+
+/*
+ * USB/EHCI
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_KIRKWOOD
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
+/*
+ *  Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SECT_SIZE           0x20000
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE                        0x20000
+#define CONFIG_ENV_ADDR                        0x80000
+#define CONFIG_ENV_OFFSET              0x80000
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND "nand read 0x800000 kernel 0x300000; bootm;"
+#define CONFIG_MTDPARTS        "512K(u-boot),512K(u-boot-env),3M(kernel),-(root)"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "update_uboot=dhcp u-boot.kwb; nand erase.part u-boot; nand write ${fileaddr} u-boot ${filesize}\0" \
+       "update_kernel=dhcp uImage-tk71; nand erase.part kernel; nand write ${fileaddr} kernel ${filesize} \0" \
+       "update_rootfs=dhcp rootfs-tk71; nand erase.part root; nand write ${fileaddr} root ${filesize}\0" \
+       "update_all=run update_uboot; run update_kernel; run update_rootfs; reset\0" \
+       "mtdids=nand0=orion_nand\0" \
+       "mtdparts=mtdparts=orion_nand:"CONFIG_MTDPARTS"\0" \
+       "bootargs=console=ttyS0,115200 mtdparts=orion_nand:"CONFIG_MTDPARTS" rootfstype=jffs2 root=/dev/mtdblock3 rw\0"
+#define MTDIDS_DEFAULT                 "nand0=orion_nand"
+#define MTDPARTS_DEFAULT               "mtdparts=orion_nand:"CONFIG_MTDPARTS
+
+#define PHYS_SDRAM_1           0x00000000      /* Base address */
+#define PHYS_SDRAM_1_SIZE      0x20000000      /* Max 512 MB RAM */
+
+#endif /* __CONFIG_TK71_H__ */