Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / ti_omap5_common.h

diff --git a/qemu/roms/u-boot/include/configs/ti_omap5_common.h b/qemu/roms/u-boot/include/configs/ti_omap5_common.h
new file mode 100644 (file)
index 0000000..a582fa4
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/ti_omap5_common.h
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2013
+ * Texas Instruments Incorporated.
+ * Sricharan R   <r.sricharan@ti.com>
+ *
+ * Derived from OMAP4 done by:
+ *     Aneesh V <aneesh@ti.com>
+ *
+ * TI OMAP5 AND DRA7XX common configuration settings
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ *
+ * For more details, please see the technical documents listed at
+ * http://www.ti.com/product/omap5432
+ */
+
+#ifndef __CONFIG_TI_OMAP5_COMMON_H
+#define __CONFIG_TI_OMAP5_COMMON_H
+
+#define CONFIG_OMAP54XX
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MISC_INIT_R
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_SYS_CACHELINE_SIZE      64
+
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE           GPT2_BASE
+
+/*
+ * For the DDR timing information we can either dynamically determine
+ * the timings to use or use pre-determined timings (based on using the
+ * dynamic method.  Default to the static timing infomation.
+ */
+#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PALMAS_POWER
+#endif
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap.h>
+
+#include <configs/ti_armv7_common.h>
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
+#define CONFIG_SYS_NS16550_CLK         48000000
+
+/* Per-SoC commands */
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+/*
+ * Environment setup
+ */
+#ifndef PARTS_DEFAULT
+#define PARTS_DEFAULT
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       DEFAULT_LINUX_BOOT_ENV \
+       "console=" CONSOLEDEV ",115200n8\0" \
+       "fdtfile=undefined\0" \
+       "bootpart=0:2\0" \
+       "bootdir=/boot\0" \
+       "bootfile=zImage\0" \
+       "usbtty=cdc_acm\0" \
+       "vram=16M\0" \
+       "partitions=" PARTS_DEFAULT "\0" \
+       "optargs=\0" \
+       "mmcdev=0\0" \
+       "mmcroot=/dev/mmcblk1p2 rw\0" \
+       "mmcrootfstype=ext4 rootwait\0" \
+       "mmcargs=setenv bootargs console=${console} " \
+               "${optargs} " \
+               "vram=${vram} " \
+               "root=${mmcroot} " \
+               "rootfstype=${mmcrootfstype}\0" \
+       "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+       "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+               "source ${loadaddr}\0" \
+       "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+       "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
+               "env import -t ${loadaddr} ${filesize}\0" \
+       "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+       "mmcboot=mmc dev ${mmcdev}; " \
+               "if mmc rescan; then " \
+                       "echo SD/MMC found on device ${mmcdev};" \
+                       "if run loadbootenv; then " \
+                               "echo Loaded environment from ${bootenv};" \
+                               "run importbootenv;" \
+                       "fi;" \
+                       "if test -n $uenvcmd; then " \
+                               "echo Running uenvcmd ...;" \
+                               "run uenvcmd;" \
+                       "fi;" \
+                       "if run loadimage; then " \
+                               "run loadfdt; " \
+                               "echo Booting from mmc${mmcdev} ...; " \
+                               "run mmcargs; " \
+                               "bootz ${loadaddr} - ${fdtaddr}; " \
+                       "fi;" \
+               "fi;\0" \
+       "findfdt="\
+               "if test $board_name = omap5_uevm; then " \
+                       "setenv fdtfile omap5-uevm.dtb; fi; " \
+               "if test $board_name = dra7xx; then " \
+                       "setenv fdtfile dra7-evm.dtb; fi;" \
+               "if test $fdtfile = undefined; then " \
+                       "echo WARNING: Could not determine device tree to use; fi; \0" \
+       "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
+
+#define CONFIG_BOOTCOMMAND \
+       "run findfdt; " \
+       "run mmcboot;" \
+       "setenv mmcdev 1; " \
+       "setenv bootpart 1:2; " \
+       "setenv mmcroot /dev/mmcblk0p2 rw; " \
+       "run mmcboot;" \
+
+
+/*
+ * SPL related defines.  The Public RAM memory map the ROM defines the
+ * area between 0x40300000 and 0x4031E000 as a download area for OMAP5
+ * (dra7xx is larger, but we do not need to be larger at this time).  We
+ * set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and
+ * print some information.
+ */
+#define CONFIG_SPL_TEXT_BASE           0x40300000
+#define CONFIG_SPL_MAX_SIZE            (0x4031E000 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_DISPLAY_PRINT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SYS_SPL_ARGS_ADDR       (CONFIG_SYS_SDRAM_BASE + \
+                                        (128 << 20))
+
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_AM33XX_BCH     /* ELM support */
+#endif
+
+#endif /* __CONFIG_TI_OMAP5_COMMON_H */