Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / include / configs / s5pc210_universal.h
diff --git a/qemu/roms/u-boot/include/configs/s5pc210_universal.h b/qemu/roms/u-boot/include/configs/s5pc210_universal.h
new file mode 100644 (file)
index 0000000..2da8871
--- /dev/null
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_UNIVERSAL_H
+#define __CONFIG_UNIVERSAL_H
+
+#include <configs/exynos4-dt.h>
+
+#define CONFIG_SYS_PROMPT      "Universal # "  /* Monitor Command Prompt */
+
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE     exynos4210-universal_c210
+
+#define CONFIG_TIZEN                   /* TIZEN lib */
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_SYS_L2CACHE_OFF         1
+
+/* Universal has 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS           2
+#define CONFIG_SYS_SDRAM_BASE          0x40000000
+#define PHYS_SDRAM_1                   CONFIG_SYS_SDRAM_BASE
+
+#define SDRAM_BANK_SIZE                        (256 << 20)     /* 256 MB */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (80 * SZ_1M))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL2
+#define CONFIG_BAUDRATE                        115200
+
+/* Console configuration */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define CONFIG_BOOTARGS                        "Please use defined boot"
+#define CONFIG_BOOTCOMMAND             "run mmcboot"
+#define CONFIG_DEFAULT_CONSOLE         "console=ttySAC1,115200n8\0"
+
+#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_LOAD_ADDR \
+                                       - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_MEM_TOP_HIDE        (1 << 20)       /* ram console */
+
+#define CONFIG_SYS_MONITOR_BASE        0x00000000
+
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + 0x5000000)
+#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x4800000)
+
+#define CONFIG_SYS_TEXT_BASE           0x44800000
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
+#define MTDIDS_DEFAULT         "onenand0=samsung-onenand"
+
+#define MTDPARTS_DEFAULT       "mtdparts=samsung-onenand:"\
+                               "128k(s-boot)"\
+                               ",896k(bootloader)"\
+                               ",256k(params)"\
+                               ",2816k(config)"\
+                               ",8m(csa)"\
+                               ",7m(kernel)"\
+                               ",1m(log)"\
+                               ",12m(modem)"\
+                               ",60m(qboot)"\
+                               ",-(UBI)\0"
+
+#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+
+#define MBRPARTS_DEFAULT       "20M(permanent)"\
+                               ",20M(boot)"\
+                               ",1G(system)"\
+                               ",100M(swap)"\
+                               ",-(UMS)\0"
+
+#define CONFIG_ENV_UBI_MTD     " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
+#define CONFIG_BOOTBLOCK       "10"
+#define CONFIG_UBIBLOCK                "9"
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV         CONFIG_MMC_DEFAULT_DEV
+#define CONFIG_ENV_SIZE                        4096
+#define CONFIG_ENV_OFFSET              ((32 - 4) << 10) /* 32KiB - 4KiB */
+
+#define CONFIG_ENV_UBIFS_OPTION        " rootflags=bulk_read,no_chk_data_crc "
+#define CONFIG_ENV_FLASHBOOT   CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
+                               "${mtdparts}"
+
+#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
+
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       "updateb=" \
+               "onenand erase 0x0 0x100000;" \
+               "onenand write 0x42008000 0x0 0x100000\0" \
+       "updatek=" \
+               "onenand erase 0xc00000 0x500000;" \
+               "onenand write 0x41008000 0xc00000 0x500000\0" \
+       "bootk=" \
+               "run loaduimage; bootm 0x40007FC0\0" \
+       "updatemmc=" \
+               "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
+               "mmc boot 0 1 1 0\0" \
+       "updatebackup=" \
+               "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
+               "mmc boot 0 1 1 0\0" \
+       "updatebootb=" \
+               "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
+       "lpj=lpj=3981312\0" \
+       "ubifsboot=" \
+               "set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
+               CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+               CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
+       "tftpboot=" \
+               "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+               CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
+               CONFIG_ENV_COMMON_BOOT \
+               "; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
+       "nfsboot=" \
+               "set bootargs root=/dev/nfs rw " \
+               "nfsroot=${nfsroot},nolock,tcp " \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:" \
+               "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
+               "; run bootk\0" \
+       "ramfsboot=" \
+               "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
+               "${console} ${meminfo} " \
+               "initrd=0x43000000,8M ramdisk=8192\0" \
+       "mmcboot=" \
+               "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+               "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
+               "run loaduimage; bootm 0x40007FC0\0" \
+       "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+       "boottrace=setenv opts initcall_debug; run bootcmd\0" \
+       "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
+       "verify=n\0" \
+       "rootfstype=ext4\0" \
+       "console=" CONFIG_DEFAULT_CONSOLE \
+       "mtdparts=" MTDPARTS_DEFAULT \
+       "mbrparts=" MBRPARTS_DEFAULT \
+       "meminfo=crashkernel=32M@0x50000000\0" \
+       "nfsroot=/nfsroot/arm\0" \
+       "bootblock=" CONFIG_BOOTBLOCK "\0" \
+       "ubiblock=" CONFIG_UBIBLOCK" \0" \
+       "ubi=enabled\0" \
+       "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
+       "mmcdev=0\0" \
+       "mmcbootpart=2\0" \
+       "mmcrootpart=3\0" \
+       "opts=always_resume=1"
+
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_SAMSUNG_ONENAND
+#define CONFIG_SYS_ONENAND_BASE                0x0C000000
+
+#include <asm/arch/gpio.h>
+/*
+ * I2C Settings
+ */
+#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7)
+#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6)
+
+#define CONFIG_CMD_I2C
+
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0
+#define CONFIG_SOFT_I2C_READ_REPEATED_START
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS 7
+
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX8998
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_SOFT_SPI
+#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
+#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1)
+#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3)
+#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0)
+#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3)
+
+#define SPI_DELAY udelay(1)
+#undef SPI_INIT
+#define SPI_SCL(bit) universal_spi_scl(bit)
+#define SPI_SDA(bit) universal_spi_sda(bit)
+#define SPI_READ universal_spi_read()
+#ifndef        __ASSEMBLY__
+void universal_spi_scl(int bit);
+void universal_spi_sda(int bit);
+int universal_spi_read(void);
+#endif
+
+/* Common misc for Samsung */
+#define CONFIG_MISC_COMMON
+
+#define CONFIG_MISC_INIT_R
+
+/* Download menu - Samsung common */
+#define CONFIG_LCD_MENU
+#define CONFIG_LCD_MENU_BOARD
+
+/* Download menu - definitions for check keys */
+#ifndef __ASSEMBLY__
+#include <power/max8998_pmic.h>
+
+#define KEY_PWR_PMIC_NAME              "MAX8998_PMIC"
+#define KEY_PWR_STATUS_REG             MAX8998_REG_STATUS1
+#define KEY_PWR_STATUS_MASK            (1 << 7)
+#define KEY_PWR_INTERRUPT_REG          MAX8998_REG_IRQ1
+#define KEY_PWR_INTERRUPT_MASK         (1 << 7)
+
+#define KEY_VOL_UP_GPIO                        exynos4_gpio_get(2, x2, 0)
+#define KEY_VOL_DOWN_GPIO              exynos4_gpio_get(2, x2, 1)
+#endif /* __ASSEMBLY__ */
+
+/* LCD console */
+#define LCD_BPP                        LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
+
+/*
+ * LCD Settings
+ */
+#define CONFIG_EXYNOS_FB
+#define CONFIG_LCD
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_LD9040
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
+
+#define LCD_XRES       480
+#define LCD_YRES       800
+
+#endif /* __CONFIG_H */