Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / qemu-mips64.h

diff --git a/qemu/roms/u-boot/include/configs/qemu-mips64.h b/qemu/roms/u-boot/include/configs/qemu-mips64.h
new file mode 100644 (file)
index 0000000..e8f5a4c
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/qemu-mips64.h
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * This file contains the configuration parameters for qemu-mips64 target.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_QEMU_MIPS
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_BOOTDELAY       10      /* autoboot after 10 seconds */
+
+#define CONFIG_BAUDRATE                115200
+
+#define CONFIG_TIMESTAMP               /* Print image info with timestamp */
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       "addmisc=setenv bootargs ${bootargs} "                          \
+               "console=ttyS0,${baudrate} "                            \
+               "panic=1\0"                                             \
+       "bootfile=/tftpboot/vmlinux\0"                                  \
+       "load=tftp ffffffff80500000 ${u-boot}\0"                        \
+       ""
+
+#define CONFIG_BOOTCOMMAND     "bootp;bootelf"
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_DHCP
+
+#define CONFIG_DRIVER_NE2000
+#define CONFIG_DRIVER_NE2000_BASE      0xffffffffb4000300
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         115200
+#define CONFIG_SYS_NS16550_COM1                0xffffffffb40003f8
+#define CONFIG_CONS_INDEX              1
+
+#define CONFIG_CMD_IDE
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_SYS_IDE_MAXBUS          2
+#define CONFIG_SYS_ATA_IDE0_OFFSET     0x1f0
+#define CONFIG_SYS_ATA_IDE1_OFFSET     0x170
+#define CONFIG_SYS_ATA_DATA_OFFSET     0
+#define CONFIG_SYS_ATA_REG_OFFSET      0
+#define CONFIG_SYS_ATA_BASE_ADDR       0xffffffffb4000000
+
+#define CONFIG_SYS_IDE_MAXDEVICE       4
+
+#define CONFIG_CMD_RARP
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP            /* undef to save memory */
+
+/* Monitor Command Prompt */
+#if defined(CONFIG_SYS_LITTLE_ENDIAN)
+#define CONFIG_SYS_PROMPT              "qemu-mips64el # "
+#else
+#define CONFIG_SYS_PROMPT              "qemu-mips64 # "
+#endif
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS             16
+
+#define CONFIG_SYS_MALLOC_LEN          128*1024
+
+#define CONFIG_SYS_BOOTPARAMS_LEN      128*1024
+
+#define CONFIG_SYS_MHZ                 132
+
+#define CONFIG_SYS_MIPS_TIMER_FREQ     (CONFIG_SYS_MHZ * 1000000)
+
+/* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE          0xffffffff80000000
+
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR           0xffffffff81000000
+
+#define CONFIG_SYS_MEMTEST_START       0xffffffff80100000
+#define CONFIG_SYS_MEMTEST_END         0xffffffff80800000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+/* The following #defines are needed to get flash environment right */
+#define CONFIG_SYS_TEXT_BASE           0xffffffffbfc00000 /* Rom version */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN         (192 << 10)
+
+#define CONFIG_SYS_INIT_SP_OFFSET      0x400000
+
+/* We boot from this flash, selected with dip switch */
+#define CONFIG_SYS_FLASH_BASE          0xffffffffbfc00000
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_MAX_FLASH_SECT      128
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
+
+/* Address and size of Primary Environment Sector */
+#define CONFIG_ENV_SIZE                0x8000
+
+#define CONFIG_ENV_OVERWRITE   1
+
+#define MEM_SIZE               128
+
+#define CONFIG_LZMA
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CONFIG_SYS_DCACHE_SIZE         16384
+#define CONFIG_SYS_ICACHE_SIZE         16384
+#define CONFIG_SYS_CACHELINE_SIZE      32
+
+#endif /* __CONFIG_H */