Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / pxm2.h

diff --git a/qemu/roms/u-boot/include/configs/pxm2.h b/qemu/roms/u-boot/include/configs/pxm2.h
new file mode 100644 (file)
index 0000000..6276d43
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/pxm2.h
@@ -0,0 +1,153 @@
+/*
+ * siemens pxm2
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * U-Boot file:/include/configs/am335x_evm.h
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_PXM2_H
+#define __CONFIG_PXM2_H
+
+#define CONFIG_SIEMENS_PXM2
+#define MACH_TYPE_PXM2                 4309
+#define CONFIG_SIEMENS_MACH_TYPE       MACH_TYPE_PXM2
+
+#include "siemens-am33x-common.h"
+
+#define CONFIG_SYS_MPUCLK      720
+#define DXR2_IOCTRL_VAL                0x18b
+#define DDR_PLL_FREQ           266
+
+#define BOARD_DFU_BUTTON_GPIO  59
+#define BOARD_DFU_BUTTON_LED   117
+#define BOARD_LCD_POWER                111
+#define BOARD_BACK_LIGHT       112
+#define BOARD_TOUCH_POWER      57
+
+ /* Physical Memory Map */
+#define CONFIG_MAX_RAM_BANK_SIZE       (512 << 20)     /* 1GB */
+
+/* I2C Configuration */
+#define CONFIG_SYS_I2C_SPEED           400000
+#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
+
+
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x300
+
+#undef CONFIG_SPL_NET_SUPPORT
+#undef CONFIG_SPL_NET_VCI_STRING
+#undef CONFIG_SPL_ETH_SUPPORT
+
+#define CONFIG_PHY_ATHEROS
+
+#define CONFIG_FACTORYSET
+
+/* UBI Support */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#endif
+
+/* Watchdog */
+#define CONFIG_OMAP_WATCHDOG
+
+#ifndef CONFIG_SPL_BUILD
+
+/* Default env settings */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "hostname=pxm2\0" \
+       "nand_img_size=0x500000\0" \
+       "optargs=\0" \
+       "splashpos=m,m\0"       \
+       CONFIG_COMMON_ENV_SETTINGS \
+       "mmc_dev=0\0" \
+       "mmc_root=/dev/mmcblk0p2 rw\0" \
+       "mmc_root_fs_type=ext4 rootwait\0" \
+       "mmc_load_uimage=" \
+               "mmc rescan; " \
+               "setenv bootfile uImage;" \
+               "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
+       "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
+       "importbootenv=echo Importing environment from mmc ...; " \
+               "env import -t $loadaddr $filesize\0" \
+       "mmc_args=run bootargs_defaults;" \
+               "mtdparts default;" \
+               "setenv bootargs ${bootargs} " \
+               "root=${mmc_root} ${mtdparts}" \
+               "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
+               "eth=${ethaddr} " \
+               "\0" \
+       "mmc_boot=run mmc_args; " \
+               "run mmc_load_uimage; " \
+               "bootm ${kloadaddr}\0" \
+       ""
+
+#ifndef CONFIG_RESTORE_FLASH
+/* set to negative value for no autoboot */
+#define CONFIG_BOOTDELAY               3
+
+#define CONFIG_BOOTCOMMAND \
+       "if dfubutton; then " \
+               "run dfu_start; " \
+               "reset; " \
+       "fi; " \
+       "if mmc rescan; then " \
+               "echo SD/MMC found on device ${mmc_dev};" \
+               "if run loadbootenv; then " \
+                       "echo Loaded environment from ${bootenv};" \
+                       "run importbootenv;" \
+               "fi;" \
+               "if test -n $uenvcmd; then " \
+                       "echo Running uenvcmd ...;" \
+                       "run uenvcmd;" \
+               "fi;" \
+               "if run mmc_load_uimage; then " \
+                       "run mmc_args;" \
+                       "bootm ${kloadaddr};" \
+               "fi;" \
+       "fi;" \
+       "run nand_boot;" \
+       "reset;"
+
+#else
+#define CONFIG_BOOTDELAY               0
+
+#define CONFIG_BOOTCOMMAND                     \
+       "setenv autoload no; "                  \
+       "dhcp; "                                \
+       "if tftp 80000000 debrick.scr; then "   \
+               "source 80000000; "             \
+       "fi"
+#endif
+#endif /* CONFIG_SPL_BUILD */
+
+#define CONFIG_VIDEO
+#if defined(CONFIG_VIDEO)
+#define CONFIG_VIDEO_DA8XX
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_CMD_BMP
+#define DA8XX_LCD_CNTL_BASE    LCD_CNTL_BASE
+#define PWM_TICKS      0x1388
+#define PWM_DUTY       0x200
+#define CONFIG_SYS_CONSOLE_BG_COL      0xff
+#define CONFIG_SYS_CONSOLE_FG_COL      0x00
+#endif
+
+#endif /* ! __CONFIG_PXM2_H */