Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / pogo_e02.h

diff --git a/qemu/roms/u-boot/include/configs/pogo_e02.h b/qemu/roms/u-boot/include/configs/pogo_e02.h
new file mode 100644 (file)
index 0000000..a81d452
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/pogo_e02.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2012
+ * David Purdy <david.c.purdy@gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef _CONFIG_POGO_E02_H
+#define _CONFIG_POGO_E02_H
+
+/*
+ * Machine type definition and ID
+ */
+#define MACH_TYPE_POGO_E02             3542
+#define CONFIG_MACH_TYPE               MACH_TYPE_POGO_E02
+#define CONFIG_IDENT_STRING            "\nPogo E02"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131                /* CPU Core subversion */
+#define CONFIG_KIRKWOOD                        /* SOC Family Name */
+#define CONFIG_KW88F6281               /* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
+#define CONFIG_SYS_MVFS
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/* Remove or override few declarations from mv-common.h */
+#undef CONFIG_SYS_PROMPT       /* previously defined in mv-common.h */
+#define CONFIG_SYS_PROMPT      "PogoE02> "
+
+/*
+ *  Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SECT_SIZE           0x20000 /* 128K */
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE                        0x20000 /* 128k */
+#define CONFIG_ENV_OFFSET              0x60000 /* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND \
+       "setenv bootargs $(bootargs_console); " \
+       "run bootcmd_usb; " \
+       "bootm 0x00800000 0x01100000"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
+       "32M(rootfs),-(data)\0"\
+       "mtdids=nand0=orion_nand\0"\
+       "bootargs_console=console=ttyS0,115200\0" \
+       "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
+       "ext2load usb 0:1 0x01100000 /uInitrd\0"
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS     {1, 0}  /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR    0
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * File system
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_LZO
+
+#endif /* _CONFIG_POGO_E02_H */