Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / origen.h

diff --git a/qemu/roms/u-boot/include/configs/origen.h b/qemu/roms/u-boot/include/configs/origen.h
new file mode 100644 (file)
index 0000000..8258338
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/origen.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_ORIGEN_H
+#define __CONFIG_ORIGEN_H
+
+#include <configs/exynos4-dt.h>
+
+#define CONFIG_SYS_PROMPT              "ORIGEN # "
+
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE     exynos4210-origen
+
+/* High Level Configuration Options */
+#define CONFIG_EXYNOS4210              1       /* which is a EXYNOS4210 SoC */
+#define CONFIG_ORIGEN                  1       /* working with ORIGEN*/
+
+#define CONFIG_SYS_DCACHE_OFF          1
+
+/* ORIGEN has 4 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS           4
+#define CONFIG_SYS_SDRAM_BASE          0x40000000
+#define PHYS_SDRAM_1                   CONFIG_SYS_SDRAM_BASE
+#define SDRAM_BANK_SIZE                        (256 << 20)     /* 256 MB */
+
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + 0x6000000)
+#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+#define CONFIG_SYS_TEXT_BASE           0x43E00000
+
+#define CONFIG_MACH_TYPE               MACH_TYPE_ORIGEN
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (80 * SZ_1M))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL2
+#define CONFIG_BAUDRATE                        115200
+
+/* Console configuration */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_DEFAULT_CONSOLE         "console=ttySAC1,115200n8\0"
+
+#define CONFIG_SYS_MEM_TOP_HIDE        (1 << 20)       /* ram console */
+
+#define CONFIG_SYS_MONITOR_BASE        0x00000000
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP                        0x00000BAD
+#define S5P_CHECK_DIDLE                        0xBAD00000
+#define S5P_CHECK_LPA                  0xABAD0000
+
+#undef CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DHCP
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+/* MMC SPL */
+#define CONFIG_SPL
+#define COPY_BL2_FNPTR_ADDR    0x02020030
+#define CONFIG_SPL_TEXT_BASE   0x02021410
+
+#define CONFIG_BOOTCOMMAND     "fatload mmc 0 40007000 uImage; bootm 40007000"
+
+#define CONFIG_IDENT_STRING            " for ORIGEN"
+
+#define CONFIG_CLK_1000_400_200
+
+/* MIU (Memory Interleaving Unit) */
+#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV         0
+#define CONFIG_ENV_SIZE                        (16 << 10)      /* 16 KB */
+#define RESERVE_BLOCK_SIZE             (512)
+#define BL1_SIZE                       (16 << 10) /*16 K reserved for BL1*/
+#define CONFIG_ENV_OFFSET              (RESERVE_BLOCK_SIZE + BL1_SIZE)
+
+#define CONFIG_SPL_LDSCRIPT    "board/samsung/common/exynos-uboot-spl.lds"
+#define CONFIG_SPL_MAX_FOOTPRINT       (14 * 1024)
+
+#define CONFIG_SYS_INIT_SP_ADDR                0x02040000
+
+/* U-boot copy size from boot Media to DRAM.*/
+#define COPY_BL2_SIZE          0x80000
+#define BL2_START_OFFSET       ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
+#define BL2_SIZE_BLOC_COUNT    (COPY_BL2_SIZE/512)
+
+#endif /* __CONFIG_H */