Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / openrd.h

diff --git a/qemu/roms/u-boot/include/configs/openrd.h b/qemu/roms/u-boot/include/configs/openrd.h
new file mode 100644 (file)
index 0000000..8fab6e6
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/openrd.h
@@ -0,0 +1,126 @@
+/*
+ * (C) Copyright 2009
+ * Net Insight <www.netinsight.net>
+ * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ *
+ * Based on sheevaplug.h:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef _CONFIG_OPENRD_H
+#define _CONFIG_OPENRD_H
+
+/*
+ * Version number information
+ */
+#ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
+# define CONFIG_IDENT_STRING   "\nOpenRD-Ultimate"
+#else
+# ifdef CONFIG_BOARD_IS_OPENRD_CLIENT
+#  define CONFIG_IDENT_STRING  "\nOpenRD-Client"
+# else
+#  ifdef CONFIG_BOARD_IS_OPENRD_BASE
+#   define CONFIG_IDENT_STRING "\nOpenRD-Base"
+#  else
+#   error Unknown OpenRD board specified
+#  endif
+# endif
+#endif
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_SHEEVA_88SV131  1       /* CPU Core subversion */
+#define CONFIG_KIRKWOOD                1       /* SOC Family Name */
+#define CONFIG_KW88F6281       1       /* SOC Name */
+#define CONFIG_MACH_OPENRD_BASE        /* Machine type */
+#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
+#define CONFIG_SYS_MVFS
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_IDE
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ *  Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND          1
+#define CONFIG_ENV_SECT_SIZE           0x20000 /* 128K */
+#else
+#define CONFIG_ENV_IS_NOWHERE          1       /* if env in SDRAM */
+#endif
+/*
+ * max 4k env size is enough, but in case of nand
+ * it has to be rounded to sector size
+ */
+#define CONFIG_ENV_SIZE                        0x20000 /* 128k */
+#define CONFIG_ENV_ADDR                        0x60000
+#define CONFIG_ENV_OFFSET              0x60000 /* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND             "${x_bootcmd_kernel}; " \
+       "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
+       "${x_bootcmd_usb}; bootm 0x6400000;"
+
+#define MTDIDS_DEFAULT         "nand0=nand_mtd"
+#define MTDPARTS_DEFAULT       "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
+       "0x400000@0x100000(uImage),"\
+       "0x1fb00000@0x500000(rootfs)"
+
+#define CONFIG_EXTRA_ENV_SETTINGS      "x_bootargs=console"            \
+       "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0"         \
+       "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"      \
+       "x_bootcmd_usb=usb start\0"                                     \
+       "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"           \
+       "mtdids="MTDIDS_DEFAULT"\0"                                     \
+       "mtdparts="MTDPARTS_DEFAULT"\0"
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+# ifdef CONFIG_BOARD_IS_OPENRD_BASE
+#  define CONFIG_MVGBE_PORTS   {1, 0}  /* enable port 0 only */
+# else
+#  define CONFIG_MVGBE_PORTS   {1, 1}  /* enable both ports */
+# endif
+# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
+#  define CONFIG_PHY_BASE_ADR  0x0
+#  define PHY_NO               "88E1121"
+# else
+#  define CONFIG_PHY_BASE_ADR  0x8
+#  define PHY_NO               "88E1116"
+# endif
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * SATA Driver configuration
+ */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET     MV_SATA_PORT0_OFFSET
+#define CONFIG_SYS_ATA_IDE1_OFFSET     MV_SATA_PORT1_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
+
+#endif /* _CONFIG_OPENRD_BASE_H */