Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / omap5_uevm.h

diff --git a/qemu/roms/u-boot/include/configs/omap5_uevm.h b/qemu/roms/u-boot/include/configs/omap5_uevm.h
new file mode 100644 (file)
index 0000000..7e2ecd5
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/omap5_uevm.h
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2013
+ * Texas Instruments Incorporated.
+ * Sricharan R   <r.sricharan@ti.com>
+ *
+ * Configuration settings for the TI EVM5430 board.
+ * See ti_omap5_common.h for omap5 common settings.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_OMAP5_EVM_H
+#define __CONFIG_OMAP5_EVM_H
+
+/* Define the default GPT table for eMMC */
+#define PARTS_DEFAULT \
+       "uuid_disk=${uuid_gpt_disk};" \
+       "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+
+#include <configs/ti_omap5_common.h>
+
+#define CONFIG_CONS_INDEX              3
+#define CONFIG_SYS_NS16550_COM3                UART3_BASE
+#define CONFIG_BAUDRATE                        115200
+
+/* MMC ENV related defines */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV         1       /* SLOT2: eMMC(1) */
+#define CONFIG_ENV_SIZE                        (128 << 10)
+#define CONFIG_ENV_OFFSET              0xE0000
+#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_CMD_SAVEENV
+
+/* Enhance our eMMC support / experience. */
+#define CONFIG_CMD_GPT
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+#define CONFIG_HSMMC2_8BIT
+#define CONFIG_SUPPORT_EMMC_BOOT
+
+/* Required support for the TCA642X GPIO we have on the uEVM */
+#define CONFIG_TCA642X
+#define CONFIG_CMD_TCA642X
+#define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
+#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
+
+/* USB UHH support options */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
+#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
+#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
+
+/* Enabled commands */
+#define CONFIG_CMD_DHCP                /* DHCP Support                 */
+#define CONFIG_CMD_NET         /* bootp, tftpboot, rarpboot    */
+#define CONFIG_CMD_NFS         /* NFS support                  */
+
+/* USB Networking options */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+#define CONSOLEDEV             "ttyO2"
+
+/* Max time to hold reset on this board, see doc/README.omap-reset-time */
+#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC       16296
+
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID    1
+#define CONFIG_SYS_SCSI_MAX_LUN                1
+#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                               CONFIG_SYS_SCSI_MAX_LUN)
+
+#endif /* __CONFIG_OMAP5_EVM_H */