--- /dev/null
+/*
+ * MATRIX VISION GmbH mvBlueLYNX-X
+ *
+ * Derived from omap3_beagle.h:
+ * (C) Copyright 2006-2008
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * Configuration settings for the TI OMAP3530 Beagle board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP34XX 1 /* which is a 34XX */
+#define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */
+#define CONFIG_MACH_TYPE MACH_TYPE_MVBLX
+#define CONFIG_OMAP_GPIO
+#define CONFIG_OMAP_COMMON
+
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO 1
+#define CONFIG_DISPLAY_BOARDINFO 1
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_OF_LIBFDT 1
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_REVISION_TAG 1
+#define CONFIG_SERIAL_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE (2 << 10) /* 2 KiB */
+ /* Sector */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
+#define CONFIG_SERIAL1 1 /* UART1 */
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
+ 115200}
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_MMC 1
+#define CONFIG_OMAP_HSMMC 1
+#define CONFIG_DOS_PARTITION 1
+
+/* silent console by default */
+#define CONFIG_SYS_DEVICE_NULLDEV 1
+#define CONFIG_SILENT_CONSOLE 1
+
+/* USB */
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_OMAP3 1
+#define CONFIG_TWL4030_USB 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
+#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1
+#define CONFIG_USBD_VENDORID 0x164c
+#define CONFIG_USBD_PRODUCTID_GSERIAL 0x0201
+#define CONFIG_USBD_PRODUCTID_CDCACM 0x0201
+#define CONFIG_USBD_MANUFACTURER "MATRIX VISION GmbH"
+#define CONFIG_USBD_PRODUCT_NAME "mvBlueLYNX-X"
+
+/* no FLASH available */
+#define CONFIG_SYS_NO_FLASH
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_IMI /* iminfo */
+#undef CONFIG_CMD_IMLS /* List all found images */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_FPGA
+
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER 1
+
+/* Environment information */
+#undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */
+#define CONFIG_BOOTDELAY 0
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR "S"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "silent=true\0" \
+ "loadaddr=0x82000000\0" \
+ "usbtty=cdc_acm\0" \
+ "console=ttyO0,115200n8\0" \
+ "mpurate=600\0" \
+ "vram=12M\0" \
+ "dvimode=1024x768-24@60\0" \
+ "defaultdisplay=dvi\0" \
+ "loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\
+ "/lib/firmware/mvblx/${fpgafilename}; then " \
+ "fpga load 0 ${loadaddr} ${filesize}; " \
+ "fi;\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "mmcrootfstype=ext3 rootwait\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
+ "vram=${vram} " \
+ "omapfb.mode=dvi:${dvimode} " \
+ "omapfb.debug=y " \
+ "omapdss.def_disp=${defaultdisplay} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype} " \
+ "mvfw.fpgavers=${fpgavers} " \
+ "${cmdline_suffix}\0" \
+ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+ "importbootenv=echo Importing environment from mmc ...; " \
+ "env import -t $loadaddr $filesize\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "mmcbootcmd= " \
+ "echo Trying mmc${mmcdev}; " \
+ "mmc dev ${mmcdev}; " \
+ "if mmc rescan; then " \
+ "setenv mmcroot /dev/mmcblk${mmcdev}p2 rw; " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadbootenv; then " \
+ "echo Loading boot environment from mmc${mmcdev}; " \
+ "run importbootenv; " \
+ "fi;" \
+ "run loadfpga; " \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "fi;" \
+ "fi\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "setenv mmcdev 1;" \
+ "run mmcbootcmd || " \
+ "setenv mmcdev 0;" \
+ "run mmcbootcmd"
+
+
+#define CONFIG_AUTO_COMPLETE 1
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT "mvblx # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_ALT_MEMTEST 1 /* alternative memtest with looping */
+#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END (0x9dffffff) /* end = 448 MB */
+#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */
+
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
+
+#define CONFIG_ENV_IS_NOWHERE 1
+
+/*----------------------------------------------------------------------------
+ * Network Subsystem (SMSC9211 Ethernet from SMSC9118 family)
+ *----------------------------------------------------------------------------
+ */
+#if defined(CONFIG_CMD_NET)
+ #define CONFIG_SMC911X 1
+ #define CONFIG_SMC911X_32_BIT
+ #define CONFIG_SMC911X_BASE 0x2C000000
+#endif /* (CONFIG_CMD_NET) */
+
+#define CONFIG_FPGA_COUNT 1
+#define CONFIG_FPGA
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_DONT_USE_CONF_DONE
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 0xA0>>1 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 2^4 = 16-byte pages */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+#define CONFIG_SYS_EEPROM_SIZE 256 /* Bytes */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_EEPROM_BUS_NUM 2
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_OMAP3_SPI
+
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+#endif /* __CONFIG_H */
Code Review / kvmfornfv.git / blobdiff