Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / omap3_evm_quick_nand.h

diff --git a/qemu/roms/u-boot/include/configs/omap3_evm_quick_nand.h b/qemu/roms/u-boot/include/configs/omap3_evm_quick_nand.h
new file mode 100644 (file)
index 0000000..4427e88
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/omap3_evm_quick_nand.h
@@ -0,0 +1,93 @@
+/*
+ * Configuration settings for quick boot from NAND on OMAP3 EVM.
+ *
+ * Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author :
+ *     Sanjeev Premi <premi@ti.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __OMAP3_EVM_QUICK_NAND_H
+#define __OMAP3_EVM_QUICK_NAND_H
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap3.h>
+
+/* ----------------------------------------------------------------------------
+ * Supported U-boot commands
+ * ----------------------------------------------------------------------------
+ */
+#define CONFIG_CMD_NAND
+
+/*
+ * Board revision is detected by probing the Ethernet chip.
+ *
+ * When revision is statically configured via CONFIG_STATIC_BOARD_REV,
+ * this option can be removed. Generated binary is leaner by ~16Kbytes.
+ */
+#define CONFIG_CMD_NET
+
+/* ----------------------------------------------------------------------------
+ * Supported U-boot features
+ * ----------------------------------------------------------------------------
+ */
+#define CONFIG_SILENT_CONSOLE
+#define CONFIG_ENV_IS_NOWHERE
+
+/* -----------------------------------------------------------------------------
+ * Include common board configuration
+ * -----------------------------------------------------------------------------
+ */
+#include "omap3_evm_common.h"
+
+/* -----------------------------------------------------------------------------
+ * Default environment
+ * -----------------------------------------------------------------------------
+ */
+#define CONFIG_BOOTDELAY       0
+
+#define CONFIG_EXTRA_ENV_SETTINGS      \
+       "verify=no\0"                   \
+       "silent=1"
+
+#define CONFIG_BOOTCOMMAND                             \
+       "nandecc hw; "  \
+       "nand read.i 0x80000000 280000 300000; "        \
+       "bootm 0x80000000;"
+
+/*
+ * Update the bootargs as necessary e.g. size of memory, partition and fstype
+ */
+#define CONFIG_BOOTARGS                                \
+       "quiet "                        \
+       "console=ttyO0,115200n8 "       \
+       "mem=128M "                     \
+       "noinitrd "                     \
+       "root=/dev/mtdblock4 rw "       \
+       "rootfstype=jffs2 "
+
+/*
+ * SPL
+ */
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT     64
+#define CONFIG_SYS_NAND_PAGE_SIZE      2048
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0
+#define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9,\
+                                               10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCSIZE                512
+#define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_HW
+#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
+
+#endif /* __OMAP3_EVM_QUICK_NAND_H */