Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / omap3_evm_quick_mmc.h

diff --git a/qemu/roms/u-boot/include/configs/omap3_evm_quick_mmc.h b/qemu/roms/u-boot/include/configs/omap3_evm_quick_mmc.h
new file mode 100644 (file)
index 0000000..50929aa
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/omap3_evm_quick_mmc.h
@@ -0,0 +1,93 @@
+/*
+ * Configuration settings for quick boot from MMC on OMAP3 EVM.
+ *
+ * Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author :
+ *     Sanjeev Premi <premi@ti.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __OMAP3_EVM_QUICK_MMC_H
+#define __OMAP3_EVM_QUICK_MMC_H
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap3.h>
+
+/* ----------------------------------------------------------------------------
+ * Supported U-boot commands
+ * ----------------------------------------------------------------------------
+ */
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
+/*
+ * Board revision is detected by probing the Ethernet chip.
+ *
+ * When revision is statically configured via CONFIG_STATIC_BOARD_REV,
+ * this option can be removed. Generated binary is leaner by ~16Kbytes.
+ */
+#define CONFIG_CMD_NET
+
+/* ----------------------------------------------------------------------------
+ * Supported U-boot features
+ * ----------------------------------------------------------------------------
+ */
+#define CONFIG_SILENT_CONSOLE
+#define CONFIG_ENV_IS_NOWHERE
+
+/* ----------------------------------------------------------------------------
+ * Supported hardware
+ * ----------------------------------------------------------------------------
+ */
+
+/* MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* -----------------------------------------------------------------------------
+ * Include common board configuration
+ * -----------------------------------------------------------------------------
+ */
+#include "omap3_evm_common.h"
+
+/* -----------------------------------------------------------------------------
+ * Default environment
+ * -----------------------------------------------------------------------------
+ */
+#define CONFIG_BOOTDELAY       0
+
+#define CONFIG_EXTRA_ENV_SETTINGS      \
+       "verify=no\0"                   \
+       "silent=1"
+
+#define CONFIG_BOOTCOMMAND                     \
+       "mmc rescan 0; "                        \
+       "fatload mmc 0 0x82000000 uImage; "     \
+       "bootm 0x82000000;"
+
+/*
+ * Update the bootargs as necessary e.g. size of memory, partition and fstype
+ */
+#define CONFIG_BOOTARGS                        \
+       "quiet "                        \
+       "console=ttyO0,115200n8 "       \
+       "mem=128M "                     \
+       "noinitrd "                     \
+       "root=/dev/mmcblk0p2 rw "       \
+       "rootfstype=ext3 rootwait"
+
+/*
+ * SPL
+ */
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
+
+#endif /* __OMAP3_EVM_QUICK_MMC_H */