Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / omap3_evm.h

diff --git a/qemu/roms/u-boot/include/configs/omap3_evm.h b/qemu/roms/u-boot/include/configs/omap3_evm.h
new file mode 100644 (file)
index 0000000..b7638fb
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/omap3_evm.h
@@ -0,0 +1,161 @@
+/*
+ * Configuration settings for the TI OMAP3 EVM board.
+ *
+ * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author :
+ *     Manikandan Pillai <mani.pillai@ti.com>
+ * Derived from Beagle Board and 3430 SDP code by
+ *     Richard Woodruff <r-woodruff2@ti.com>
+ *     Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * Manikandan Pillai <mani.pillai@ti.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __OMAP3EVM_CONFIG_H
+#define __OMAP3EVM_CONFIG_H
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap3.h>
+
+/* ----------------------------------------------------------------------------
+ * Supported U-boot commands
+ * ----------------------------------------------------------------------------
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
+#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
+#undef CONFIG_CMD_IMI          /* iminfo                       */
+#undef CONFIG_CMD_IMLS         /* List all found images        */
+
+/* ----------------------------------------------------------------------------
+ * Supported U-boot features
+ * ----------------------------------------------------------------------------
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Display CPU and Board information */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Add auto-completion support */
+#define CONFIG_AUTO_COMPLETE
+
+/* ----------------------------------------------------------------------------
+ * Supported hardware
+ * ----------------------------------------------------------------------------
+ */
+
+/* MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+
+/* SPL */
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
+
+/* Partition tables */
+#define CONFIG_EFI_PARTITION
+#define CONFIG_DOS_PARTITION
+
+/* USB
+ *
+ * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
+ * Enable CONFIG_MUSB_UDD for Device functionalities.
+ */
+#define CONFIG_USB_OMAP3
+#define CONFIG_MUSB_HCD
+/* #define CONFIG_MUSB_UDC */
+
+/* NAND SPL */
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT     64
+#define CONFIG_SYS_NAND_PAGE_SIZE      2048
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0
+#define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9,\
+                                               10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCSIZE                512
+#define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_HW
+#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
+
+/* -----------------------------------------------------------------------------
+ * Include common board configuration
+ * -----------------------------------------------------------------------------
+ */
+#include "omap3_evm_common.h"
+
+/* -----------------------------------------------------------------------------
+ * Default environment
+ * -----------------------------------------------------------------------------
+ */
+#define CONFIG_BOOTDELAY       3
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "loadaddr=0x82000000\0" \
+       "usbtty=cdc_acm\0" \
+       "mmcdev=0\0" \
+       "console=ttyO0,115200n8\0" \
+       "mmcargs=setenv bootargs console=${console} " \
+               "root=/dev/mmcblk0p2 rw " \
+               "rootfstype=ext3 rootwait\0" \
+       "nandargs=setenv bootargs console=${console} " \
+               "root=/dev/mtdblock4 rw " \
+               "rootfstype=jffs2\0" \
+       "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+       "bootscript=echo Running bootscript from mmc ...; " \
+               "source ${loadaddr}\0" \
+       "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+       "mmcboot=echo Booting from mmc ...; " \
+               "run mmcargs; " \
+               "bootm ${loadaddr}\0" \
+       "nandboot=echo Booting from nand ...; " \
+               "run nandargs; " \
+               "onenand read ${loadaddr} 280000 400000; " \
+               "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
+               "if run loadbootscript; then " \
+                       "run bootscript; " \
+               "else " \
+                       "if run loaduimage; then " \
+                               "run mmcboot; " \
+                       "else run nandboot; " \
+                       "fi; " \
+               "fi; " \
+       "else run nandboot; fi"
+
+#endif /* __OMAP3EVM_CONFIG_H */