Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / o2mnt.h

diff --git a/qemu/roms/u-boot/include/configs/o2mnt.h b/qemu/roms/u-boot/include/configs/o2mnt.h
new file mode 100644 (file)
index 0000000..c2164b5
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/o2mnt.h
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2012
+ * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFF000000   boot low boot high (standard configuration)
+ * 0x00100000   boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xff000000      /* Standard: boot low */
+#endif
+
+/* Board specific flash config */
+#define CONFIG_SYS_FLASH_BASE          0xff000000
+#define CONFIG_SYS_FLASH_SIZE          0x01000000      /* maximum 16MB */
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT      128
+
+/*
+ * Include common defines for all ifm boards
+ */
+#include "o2dnt-common.h"
+
+/* GPIO configuration */
+#define CONFIG_SYS_GPS_PORT_CONFIG     0x00002004      /* no CAN */
+
+/* Other board specific configs */
+#define CONFIG_NETCONSOLE
+
+#define CONFIG_SYS_BOOTCS_CFG          0x00087801
+#define CONFIG_SYS_RESET_ADDRESS       0xff000000
+
+#define CONFIG_SYS_MEMTEST_START       0x00100000      /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END         0x03f00000      /* 1 - 63 MB in DRAM  */
+
+#define CONFIG_BOARD_NAME              "o2mnt"
+#define CONFIG_BOARD_BOOTCMD           "${newcmd}"
+#define CONFIG_BOARD_MEM_LIMIT         xstr(62)
+#define BOARD_POST_CRC32_END           xstr(0x01000000)
+
+#ifndef CONFIG_IFM_SENSOR_TYPE
+#define CONFIG_IFM_SENSOR_TYPE         "O2M110"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
+       CONFIG_IFM_DEFAULT_ENV_OLD                                      \
+       CONFIG_IFM_DEFAULT_ENV_NEW                                      \
+       "linbot=ff060000\0"                                             \
+       "lintop=ff25ffff\0"                                             \
+       "rambot=ff260000\0"                                             \
+       "ramtop=ffc5ffff\0"                                             \
+       "jffbot=ffc60000\0"                                             \
+       "jfftop=ffffffff\0"                                             \
+       "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
+       "ubotop=ff03ffff\0"                                             \
+       "kernel_addr=0xff060000\0"                                      \
+       "ramdisk_addr=0xff260000\0"                                     \
+       "newcmd=run scrprot;run flash_ext2\0"                           \
+       "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} "  \
+               "${ramtop}\0"                                           \
+       "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0"   \
+       "ext2args=setenv bootargs root=/dev/mtdblock3 ro "              \
+               "rootfstype=ext2\0"                                     \
+       "pwm=mw f0000674 0x10006;mw f0000678 0x30000;"                  \
+               "mw f0000678 0x30001;mw f0000670 0x3\0"                 \
+       "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);"           \
+               "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0"       \
+       "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0"                          \
+       "srelease=0.00\0"