Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / o2i.h

diff --git a/qemu/roms/u-boot/include/configs/o2i.h b/qemu/roms/u-boot/include/configs/o2i.h
new file mode 100644 (file)
index 0000000..8fe1da5
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/o2i.h
@@ -0,0 +1,66 @@
+/*
+ * (C) Copyright 2012
+ * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFF000000   boot low boot high (standard configuration)
+ * 0x00100000   boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xff000000      /* Standard: boot low */
+#endif
+
+/* Board specific flash config */
+#define CONFIG_SYS_FLASH_BASE          0xff000000
+#define CONFIG_SYS_FLASH_SIZE          0x01000000      /* maximum 16MB */
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT      128
+
+/*
+ * Include common defines for all ifm boards
+ */
+#include "o2dnt-common.h"
+
+/* GPIO configuration */
+#define CONFIG_SYS_GPS_PORT_CONFIG     0x00002006      /* no CAN */
+
+/* Other board specific configs */
+#define CONFIG_SYS_BOOTCS_CFG          0x00087801
+#define CONFIG_SYS_RESET_ADDRESS       0xff000000
+
+#define CONFIG_SYS_MEMTEST_START       0x00100000      /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END         0x03f00000      /* 1 - 63 MB in DRAM  */
+
+#define CONFIG_BOARD_NAME              "o2i"
+#define CONFIG_BOARD_BOOTCMD           "run dhcp_boot"
+#define CONFIG_BOARD_MEM_LIMIT         xstr(62)
+#define BOARD_POST_CRC32_END           xstr(0x01000000)
+
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
+       CONFIG_IFM_DEFAULT_ENV_OLD                                      \
+       CONFIG_IFM_DEFAULT_ENV_NEW                                      \
+       "linbot=ff060000\0"                                             \
+       "lintop=ff15ffff\0"                                             \
+       "rambot=ff160000\0"                                             \
+       "ramtop=ff55ffff\0"                                             \
+       "jffbot=ff560000\0"                                             \
+       "jfftop=ffebffff\0"                                             \
+       "kernel_addr=0xff060000\0"                                      \
+       "ramdisk_addr=0xff160000\0"                                     \
+       "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
+       "ubotop=ff03ffff\0"                                             \
+       "autoload=no\0"                                                 \
+       "dhcp_boot=run dhcpcmd; run flash_mtd\0"                        \
+       "hostname=IFM_SENSOR\0"                                         \
+       "flash_mtd=run mtd_args addip addmem;bootm ${kernel_addr}\0"    \
+       "mtd_args=setenv bootargs root=/dev/mtdblock3 "                 \
+               "rw rootfstype=cramfs\0"                                \
+       "sensorType=O2I100AA\0"                                         \
+       "netretry=once\0"                                               \
+       "master=mw f0000b00 0x00052006;mw f0000b0c ${IOpin};"           \
+               "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"