Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / o2dnt2.h

diff --git a/qemu/roms/u-boot/include/configs/o2dnt2.h b/qemu/roms/u-boot/include/configs/o2dnt2.h
new file mode 100644 (file)
index 0000000..3636c0e
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/o2dnt2.h
@@ -0,0 +1,69 @@
+/*
+ * (C) Copyright 2012
+ * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFC000000   boot low boot high (standard configuration)
+ * 0x00100000   boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xfc000000      /* Standard: boot low */
+#endif
+
+/* Board specific flash config */
+#define CONFIG_SYS_FLASH_BASE          0xfc000000
+#define CONFIG_SYS_FLASH_SIZE          0x04000000      /* maximum 64MB */
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT      512
+
+/*
+ * Include common defines for all ifm boards
+ */
+#include "o2dnt-common.h"
+
+/* additional commands */
+#define CONFIG_CMD_ITEST
+
+/*
+ * GPIO configuration:
+ * CS1 SDRAM activate + no CAN + no PCI
+ */
+#define CONFIG_SYS_GPS_PORT_CONFIG     0x8000A004
+
+/* Other board specific configs */
+#define CONFIG_SYS_BOOTCS_CFG          0x00057d01
+#define CONFIG_SYS_RESET_ADDRESS       0xfc000000
+
+#define CONFIG_SYS_MEMTEST_START       0x00100000      /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END         0x07f00000      /* 1 - 127 MB in DRAM */
+
+#define CONFIG_BOARD_NAME              "o2dnt2"
+#define CONFIG_BOARD_BOOTCMD           "run flash_self"
+#define CONFIG_BOARD_MEM_LIMIT         xstr(126)
+#define BOARD_POST_CRC32_END           xstr(0x01000000)
+
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
+       CONFIG_IFM_DEFAULT_ENV_OLD                                      \
+       CONFIG_IFM_DEFAULT_ENV_NEW                                      \
+       "linbot=fc060000\0"                                             \
+       "lintop=fc15ffff\0"                                             \
+       "rambot=fc160000\0"                                             \
+       "ramtop=fc55ffff\0"                                             \
+       "jffbot=fc560000\0"                                             \
+       "jfftop=fce5ffff\0"                                             \
+       "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
+       "ubotop=fc03ffff\0"                                             \
+       "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0"    \
+       "calbot=fce60000\0"                                             \
+       "caltop=fcffffff\0"                                             \
+       "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};"     \
+               "cp.b ${fileaddr} ${calbot} ${filesize}\0"              \
+       "kernel_addr=0xfc060000\0"                                      \
+       "ramdisk_addr=0xfc160000\0"                                     \
+       "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};"           \
+               "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"