Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / o2d300.h

diff --git a/qemu/roms/u-boot/include/configs/o2d300.h b/qemu/roms/u-boot/include/configs/o2d300.h
new file mode 100644 (file)
index 0000000..1af5383
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/o2d300.h
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2012
+ * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFC000000   boot low boot high (standard configuration)
+ * 0x00100000   boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xfc000000      /* Standard: boot low */
+#endif
+
+/* Board specific flash config */
+#define CONFIG_SYS_FLASH_BASE          0xfc000000
+#define CONFIG_SYS_FLASH_SIZE          0x04000000      /* maximum 64MB */
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT      512
+
+/*
+ * Include common defines for all ifm boards
+ */
+#include "o2dnt-common.h"
+
+/*
+ * GPIO configuration:
+ * CS1 SDRAM activate + no CAN + no PCI
+ */
+#define CONFIG_SYS_GPS_PORT_CONFIG      0x8000A004
+
+/* Other board specific configs */
+#define CONFIG_SYS_BOOTCS_CFG          0x00057d01
+#define CONFIG_SYS_RESET_ADDRESS       0xfc000000
+
+#define CONFIG_SYS_MEMTEST_START       0x00100000      /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END         0x07f00000      /* 1 - 127 MB in DRAM */
+
+/* Use redundant environment */
+#define CONFIG_ENV_ADDR_REDUND         (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND         (CONFIG_ENV_SIZE)
+
+#define CONFIG_BOARD_NAME              "o2d300"
+#define CONFIG_BOARD_BOOTCMD           "run dhcp_boot"
+#define CONFIG_BOARD_MEM_LIMIT         xstr(126)
+#define BOARD_POST_CRC32_END           xstr(0x02000000)
+
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
+       CONFIG_IFM_DEFAULT_ENV_OLD                                      \
+       CONFIG_IFM_DEFAULT_ENV_NEW                                      \
+       "autoload=no\0"                                                 \
+       "dhcp_boot=run dhcpcmd;run flash_mtd\0"                         \
+       "flash_mtd=run mtd_args addip addmem;"                          \
+               "bootm ${kernel_addr}\0"                                \
+       "mtd_args=setenv bootargs root=/dev/mtdblock4 "                 \
+               "rw rootfstype=cramfs\0"                                \
+       "linbot=fc080000\0"                                             \
+       "lintop=fc17ffff\0"                                             \
+       "rambot=fc180000\0"                                             \
+       "ramtop=fc57ffff\0"                                             \
+       "jffbot=fc580000\0"                                             \
+       "jfftop=fd39ffff\0"                                             \
+       "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
+       "ubotop=fc03ffff\0"                                             \
+       "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0"      \
+       "halbot=fd3a0000\0"                                             \
+       "haltop=fdf9ffff\0"                                             \
+       "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};"     \
+               "cp.b ${fileaddr} ${halbot} ${filesize}\0"              \
+       "kernel_addr=0xfc060000\0"                                      \
+       "ramdisk_addr=0xfc160000\0"                                     \
+       "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};"           \
+               "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"               \
+       "netretry=once\0"                                               \
+       "protcmd=protect on ${linbot} ${lintop};"                       \
+               "protect on ${rambot} ${ramtop}\0"                      \
+       "o2derror=def_env\0"                                            \
+       "sensorType=O2D300AA\0"