Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / mv-common.h

diff --git a/qemu/roms/u-boot/include/configs/mv-common.h b/qemu/roms/u-boot/include/configs/mv-common.h
new file mode 100644 (file)
index 0000000..721b75d
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/mv-common.h
@@ -0,0 +1,154 @@
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * This file contains Marvell Board Specific common defincations.
+ * This file should be included in board config header file.
+ *
+ * It supports common definations for Kirkwood platform
+ * TBD: support for Orion5X platforms
+ */
+
+#ifndef _MV_COMMON_H
+#define _MV_COMMON_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_MARVELL         1
+
+/*
+ * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define        CONFIG_SYS_TEXT_BASE    0x00600000
+#endif /* CONFIG_SYS_TEXT_BASE */
+
+/* additions for new ARM relocation support */
+#define CONFIG_SYS_SDRAM_BASE  0x00000000
+
+/*
+ * CLKs configurations
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
+#define CONFIG_SYS_NS16550_CLK         CONFIG_SYS_TCLK
+#define CONFIG_SYS_NS16550_COM1                MV_UART_CONSOLE_BASE
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX      1       /*Console on UART0 */
+#define CONFIG_BAUDRATE                        115200
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, \
+                                         115200,230400, 460800, 921600 }
+/* auto boot */
+#define CONFIG_BOOTDELAY       3       /* default enable autoboot */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs  */
+#define CONFIG_INITRD_TAG      1       /* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS 1     /* enable memory tag */
+
+#define        CONFIG_SYS_PROMPT       "Marvell>> "    /* Command Prompt */
+#define        CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
+#define        CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
+               +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN  (1024 * 1024 * 4) /* 4MiB for malloc() */
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CONSOLE_INFO_QUIET      /* some code reduction */
+#define CONFIG_ARCH_CPU_INIT   /* call arch_cpu_init() */
+#define CONFIG_ARCH_MISC_INIT  /* call arch_misc_init() */
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */
+#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
+#define CONFIG_SYS_LOAD_ADDR   0x00800000      /* default load adr- 8M */
+#define CONFIG_SYS_MEMTEST_START 0x00800000    /* 8M */
+#define CONFIG_SYS_MEMTEST_END 0x00ffffff      /*(_16M -1) */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000    /* Rst Vector Adr */
+#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
+
+/* ====> Include platform Common Definitions */
+#include <asm/arch/config.h>
+
+/*
+ * DRAM Banks configuration, Custom config can be done in <board>.h
+ */
+#ifndef CONFIG_NR_DRAM_BANKS
+#define CONFIG_NR_DRAM_BANKS   CONFIG_NR_DRAM_BANKS_MAX
+#else
+#if (CONFIG_NR_DRAM_BANKS > CONFIG_NR_DRAM_BANKS_MAX)
+#error CONFIG_NR_DRAM_BANKS Configurated more than available
+#endif
+#endif /* CONFIG_NR_DRAM_BANKS */
+
+/* ====> Include driver Common Definitions */
+/*
+ * Common NAND configuration
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#endif
+
+/*
+ * Common SPI Flash configuration
+ */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH               1
+#define CONFIG_SPI_FLASH_MACRONIX      1
+#endif
+
+/*
+ * Common USB/EHCI configuration
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI                /* Enable EHCI USB support */
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_SUPPORT_VFAT
+#endif /* CONFIG_CMD_USB */
+
+/*
+ * File system
+ */
+#ifdef CONFIG_SYS_MVFS
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_LZO
+#endif
+
+#endif /* _MV_COMMON_H */