Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / ms7722se.h

diff --git a/qemu/roms/u-boot/include/configs/ms7722se.h b/qemu/roms/u-boot/include/configs/ms7722se.h
new file mode 100644 (file)
index 0000000..1c8ada6
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/ms7722se.h
@@ -0,0 +1,115 @@
+/*
+ * Configuation settings for the Hitachi Solution Engine 7722
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __MS7722SE_H
+#define __MS7722SE_H
+
+#define CONFIG_CPU_SH7722      1
+#define CONFIG_MS7722SE                1
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_SAVEENV
+
+#define CONFIG_BAUDRATE                115200
+#define CONFIG_BOOTDELAY       3
+#define CONFIG_BOOTARGS                "console=ttySC0,115200 root=1f01"
+
+#define CONFIG_VERSION_VARIABLE
+#undef  CONFIG_SHOW_BOOT_PROGRESS
+
+/* SMC9111 */
+#define CONFIG_SMC91111
+#define CONFIG_SMC91111_BASE    (0xB8000000)
+
+/* MEMORY */
+#define MS7722SE_SDRAM_BASE    (0x8C000000)
+#define MS7722SE_FLASH_BASE_1  (0xA0000000)
+#define MS7722SE_FLASH_BANK_SIZE       (8*1024 * 1024)
+
+#define CONFIG_SYS_TEXT_BASE   0x8FFC0000
+#define CONFIG_SYS_LONGHELP                            /* undef to save memory */
+#define CONFIG_SYS_CBSIZE              256             /* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE              256             /* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS             16              /* max args accepted for monitor commands */
+#define CONFIG_SYS_BARGSIZE            512             /* Buffer size for Boot Arguments passed to kernel */
+#define CONFIG_SYS_BAUDRATE_TABLE      { 115200 }      /* List of legal baudrate settings for this board */
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE    1
+#define CONFIG_CONS_SCIF0      1
+#undef  CONFIG_SYS_CONSOLE_INFO_QUIET                  /* Suppress display of console information at boot */
+#undef  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef  CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START       (MS7722SE_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
+
+#undef  CONFIG_SYS_ALT_MEMTEST         /* Enable alternate, more extensive, memory test */
+#undef  CONFIG_SYS_MEMTEST_SCRATCH     /* Scratch address used by the alternate memory test */
+
+#undef  CONFIG_SYS_LOADS_BAUD_CHANGE   /* Enable temporary baudrate change while serial download */
+
+#define CONFIG_SYS_SDRAM_BASE  (MS7722SE_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE  (64 * 1024 * 1024)      /* maybe more, but if so u-boot doesn't know about it... */
+
+#define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)       /* default load address for scripts ?!? */
+
+#define CONFIG_SYS_MONITOR_BASE        (MS7722SE_FLASH_BASE_1) /* Address of u-boot image
+                                                       in Flash (NOT run time address in SDRAM) ?!? */
+#define CONFIG_SYS_MONITOR_LEN (128 * 1024)            /* */
+#define CONFIG_SYS_MALLOC_LEN  (256 * 1024)            /* Size of DRAM reserved for malloc() use */
+#define CONFIG_SYS_BOOTMAPSZ   (8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#undef  CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO                    /* print 'E' for empty sector on flinfo */
+
+#define CONFIG_SYS_FLASH_BASE          (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */
+
+#define CONFIG_SYS_MAX_FLASH_SECT      150             /* Max number of sectors on each
+                                                       Flash chip */
+
+/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
+#define CONFIG_SYS_MAX_FLASH_BANKS     2
+#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
+                                 CONFIG_SYS_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
+                               }
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT    (3 * 1000)      /* Timeout for Flash erase operations (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    (3 * 1000)      /* Timeout for Flash write operations (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT     (3 * 1000)      /* Timeout for Flash set sector lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT   (3 * 1000)      /* Timeout for Flash clear lock bit operations (in ms) */
+
+#undef  CONFIG_SYS_FLASH_PROTECTION                    /* Use hardware flash sectors protection instead of U-Boot software protection */
+
+#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE   1
+#define CONFIG_ENV_SECT_SIZE   (8 * 1024)
+#define CONFIG_ENV_SIZE                (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
+#define CONFIG_ENV_OFFSET              (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)       /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ    33333333
+#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_TMU_CLK_DIV         (4)     /* 4 (default), 16, 64, 256 or 1024 */
+
+#endif /* __MS7722SE_H */