Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / malta.h

diff --git a/qemu/roms/u-boot/include/configs/malta.h b/qemu/roms/u-boot/include/configs/malta.h
new file mode 100644 (file)
index 0000000..a29b86b
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/malta.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#ifndef _MALTA_CONFIG_H
+#define _MALTA_CONFIG_H
+
+#include <asm/addrspace.h>
+#include <asm/malta.h>
+
+/*
+ * System configuration
+ */
+#define CONFIG_MALTA
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_MEMSIZE_IN_BYTES
+
+#define CONFIG_PCI
+#define CONFIG_PCI_GT64120
+#define CONFIG_PCI_MSC01
+#define CONFIG_PCI_PNP
+#define CONFIG_PCNET
+#define CONFIG_PCNET_79C973
+#define PCNET_HAS_PROM
+
+#define CONFIG_MISC_INIT_R
+#define CONFIG_RTC_MC146818
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
+
+/*
+ * CPU Configuration
+ */
+#define CONFIG_SYS_MHZ                 250     /* arbitrary value */
+#define CONFIG_SYS_MIPS_TIMER_FREQ     (CONFIG_SYS_MHZ * 1000000)
+
+#define CONFIG_SWAP_IO_SPACE
+
+/*
+ * Memory map
+ */
+#define CONFIG_SYS_TEXT_BASE           0xbe000000 /* Rom version */
+#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_SDRAM_BASE          0x80000000 /* Cached addr */
+#define CONFIG_SYS_MEM_SIZE            (256 * 1024 * 1024)
+
+#define CONFIG_SYS_INIT_SP_OFFSET      0x400000
+
+#define CONFIG_SYS_LOAD_ADDR           0x81000000
+#define CONFIG_SYS_MEMTEST_START       0x80100000
+#define CONFIG_SYS_MEMTEST_END         0x80800000
+
+#define CONFIG_SYS_MALLOC_LEN          (128 * 1024)
+#define CONFIG_SYS_BOOTPARAMS_LEN      (128 * 1024)
+#define CONFIG_SYS_BOOTM_LEN           (64 * 1024 * 1024)
+
+/*
+ * Console configuration
+ */
+#if defined(CONFIG_SYS_LITTLE_ENDIAN)
+#define CONFIG_SYS_PROMPT              "maltael # "
+#else
+#define CONFIG_SYS_PROMPT              "malta # "
+#endif
+
+#define CONFIG_SYS_CBSIZE              256
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
+                                        sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS             16
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+
+/*
+ * Serial driver
+ */
+#define CONFIG_BAUDRATE                        115200
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         (115200 * 16)
+#define CONFIG_SYS_NS16550_COM1                CKSEG1ADDR(MALTA_GT_UART0_BASE)
+#define CONFIG_SYS_NS16550_COM2                CKSEG1ADDR(MALTA_MSC01_UART0_BASE)
+#define CONFIG_CONS_INDEX              1
+
+/*
+ * Flash configuration
+ */
+#define CONFIG_SYS_FLASH_BASE          (KSEG1 | MALTA_FLASH_BASE)
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_MAX_FLASH_SECT      128
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE           0x20000
+#define CONFIG_ENV_SIZE                        CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR \
+       (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
+
+/*
+ * Commands
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+
+#define CONFIG_SYS_LONGHELP            /* verbose help, undef to save memory */
+
+#endif /* _MALTA_CONFIG_H */