--- /dev/null
+/*
+ * Copyright (c) 2012 Michael Walle
+ * Michael Walle <michael@walle.cc>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CONFIG_LSXL_H
+#define _CONFIG_LSXL_H
+
+/*
+ * Version number information
+ */
+#if defined(CONFIG_LSCHLV2)
+#define CONFIG_IDENT_STRING " LS-CHLv2"
+#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
+#define CONFIG_MACH_TYPE 3006
+#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
+#elif defined(CONFIG_LSXHL)
+#define CONFIG_IDENT_STRING " LS-XHL"
+#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
+#define CONFIG_MACH_TYPE 2663
+/* CONFIG_SYS_TCLK is 200000000 by default */
+#else
+#error "unknown board"
+#endif
+
+/*
+ * General configuration options
+ */
+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD /* SOC Family Name */
+#define CONFIG_KW88F6281 /* SOC Name */
+
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_RANDOM_MACADDR
+#define CONFIG_LIB_RAND
+#define CONFIG_KIRKWOOD_GPIO
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/*
+ * Enable u-boot API for standalone programs.
+ */
+#define CONFIG_API
+
+/*
+ * Commands configuration
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_USB
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/* ST M25P40 */
+#undef CONFIG_SPI_FLASH_MACRONIX
+#define CONFIG_SPI_FLASH_STMICRO
+#undef CONFIG_ENV_SPI_MAX_HZ
+#define CONFIG_ENV_SPI_MAX_HZ 25000000
+#undef CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_SF_DEFAULT_SPEED 25000000
+
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * Environment variables configurations
+ */
+#ifdef CONFIG_SPI_FLASH
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 8
+#define CONFIG_ENV_IS_IN_SPI_FLASH 1
+#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE 0x10000 /* 64k */
+#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_LOADADDR 0x00800000
+#define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootsource=hdd\0" \
+ "hdpart=0:1\0" \
+ "bootcmd_net=bootp 0x00100000 uImage " \
+ "&& tftpboot 0x00800000 uInitrd " \
+ "&& bootm 0x00100000 0x00800000\0" \
+ "bootcmd_hdd=ide reset " \
+ "&& ext2load ide ${hdpart} 0x00100000 /uImage " \
+ "&& ext2load ide ${hdpart} 0x00800000 /uInitrd " \
+ "&& bootm 0x00100000 0x00800000\0" \
+ "bootcmd_usb=usb start " \
+ "&& fatload usb 0:1 0x00100000 /uImage " \
+ "&& fatload usb 0:1 0x00800000 /uInitrd " \
+ "&& bootm 0x00100000 0x00800000\0" \
+ "bootcmd_rescue=run config_nc_dhcp; run nc\0" \
+ "eraseenv=sf probe 0 " \
+ "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
+ " +" __stringify(CONFIG_ENV_SIZE) "\0" \
+ "config_nc_dhcp=setenv autoload_old ${autoload}; " \
+ "setenv autoload no " \
+ "&& bootp " \
+ "&& setenv ncip " \
+ "&& setenv autoload ${autoload_old}; " \
+ "setenv autoload_old\0" \
+ "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
+ "setenv ncip; setenv gatewayip; setenv ethact; " \
+ "setenv bootfile; setenv dnsip; " \
+ "setenv bootsource hdd; run ser\0" \
+ "restore_env=run standard_env; saveenv; reset\0" \
+ "ser=setenv stdin serial; setenv stdout serial; " \
+ "setenv stderr serial\0" \
+ "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0"
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
+#define CONFIG_PHY_BASE_ADR 7
+#undef CONFIG_RESET_PHY_R
+#endif /* CONFIG_CMD_NET */
+
+#ifdef CONFIG_CMD_IDE
+#undef CONFIG_IDE_LED
+#undef CONFIG_SYS_IDE_MAXBUS
+#define CONFIG_SYS_IDE_MAXBUS 1
+#undef CONFIG_SYS_IDE_MAXDEVICE
+#define CONFIG_SYS_IDE_MAXDEVICE 1
+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#endif
+
+#endif /* _CONFIG_LSXL_H */
Code Review / kvmfornfv.git / blobdiff