Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / km / km-powerpc.h

diff --git a/qemu/roms/u-boot/include/configs/km/km-powerpc.h b/qemu/roms/u-boot/include/configs/km/km-powerpc.h
new file mode 100644 (file)
index 0000000..763c5ba
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/km/km-powerpc.h
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_KEYMILE_POWERPC_H
+#define __CONFIG_KEYMILE_POWERPC_H
+
+/* Do boardspecific init for all boards */
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_LAST_STAGE_INIT
+
+#define CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_CMD_DTT
+#define CONFIG_JFFS2_CMDLINE
+
+/* standard km ethernet_present for piggy */
+#define CONFIG_KM_COMMON_ETH_INIT
+
+/* EEprom support 24C08, 24C16, 24C64 */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3  /* 8 Byte write page */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
+
+#define CONFIG_ENV_SIZE                0x04000         /* Size of Environment */
+#define CONFIG_FLASH_CFI_MTD
+
+#define CONFIG_SYS_MEMTEST_START 0x00100000    /* memtest works on */
+
+#define CONFIG_SYS_MEMTEST_END 0x00f00000      /* 1 ... 15 MB in DRAM  */
+
+#define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
+
+/* Reserve 4 MB for malloc */
+#define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
+
+/******************************************************************************
+ * (PRAM usage)
+ * ... -------------------------------------------------------
+ * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM
+ * ... |<------------------- pram -------------------------->|
+ * ... -------------------------------------------------------
+ * @END_OF_RAM:
+ * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose
+ * @CONFIG_KM_PHRAM: address for /var
+ * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application)
+ * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM
+ */
+
+/* size of rootfs in RAM */
+#define CONFIG_KM_ROOTFSSIZE   0x0
+/* pseudo-non volatile RAM [hex] */
+#define CONFIG_KM_PNVRAM       0x80000
+/* physical RAM MTD size [hex] */
+#define CONFIG_KM_PHRAM                0x100000
+/* resereved pram area at the end of memroy [hex] */
+#define CONFIG_KM_RESERVED_PRAM        0x0
+/* enable protected RAM */
+#define CONFIG_PRAM            0
+
+#define CONFIG_KM_CRAMFS_ADDR  0x800000
+#define CONFIG_KM_KERNEL_ADDR  0x400000        /* 3968Kbytes */
+#define CONFIG_KM_FDT_ADDR     0x7E0000        /* 128Kbytes */
+
+/* architecture specific default bootargs */
+#define CONFIG_KM_DEF_BOOT_ARGS_CPU            ""
+
+#define CONFIG_KM_DEF_ENV_CPU                                          \
+       "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"           \
+       "update="                                                       \
+               "protect off " __stringify(BOOTFLASH_START) " +${filesize} && "\
+               "erase " __stringify(BOOTFLASH_START) "  +${filesize} && "\
+               "cp.b ${load_addr_r} " __stringify(BOOTFLASH_START)     \
+               "  ${filesize} && "                                     \
+               "protect on " __stringify(BOOTFLASH_START) "  +${filesize}\0"\
+       "set_fdthigh=true\0"                                            \
+       ""
+
+#endif /* __CONFIG_KEYMILE_POWERPC_H */