--- /dev/null
+/*
+ * (C) Copyright 2008-2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_KEYMILE_H
+#define __CONFIG_KEYMILE_H
+
+#define CONFIG_BOOTCOUNT_LIMIT
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DEFAULTENV_VARS
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_SETEXPR
+
+#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
+
+#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+#define CONFIG_HUSH_INIT_VAR
+
+#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define CONFIG_LOADS_ECHO
+#define CONFIG_SYS_LOADS_BAUD_CHANGE
+
+/* Support the IVM EEprom */
+#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
+#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
+#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
+
+#define CONFIG_SYS_FLASH_PROTECTION
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* UBI Support for all Keymile boards */
+#define CONFIG_CMD_UBI
+#define CONFIG_RBTREE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_CONCAT
+
+#define CONFIG_CMD_CRAMFS
+#define CONFIG_CRAMFS_CMDLINE
+
+#ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS
+#define CONFIG_KM_DEF_ENV_BOOTPARAMS \
+ "actual_bank=0\0"
+#endif
+
+#ifndef CONFIG_KM_DEF_NETDEV
+#define CONFIG_KM_DEF_NETDEV \
+ "netdev=eth0\0"
+#endif
+
+#ifndef CONFIG_KM_UBI_PARTITION_NAME_BOOT
+#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
+#endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */
+
+#ifndef CONFIG_KM_UBI_PART_BOOT_OPTS
+#define CONFIG_KM_UBI_PART_BOOT_OPTS ""
+#endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */
+
+#ifndef CONFIG_KM_UBI_PARTITION_NAME_APP
+/* one flash chip only called boot */
+/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
+# define CONFIG_KM_UBI_LINUX_MTD \
+ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \
+ CONFIG_KM_UBI_PART_BOOT_OPTS
+# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \
+ "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0"
+#else /* CONFIG_KM_UBI_PARTITION_NAME_APP */
+/* two flash chips called boot and app */
+/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
+/* app: CONFIG_KM_UBI_PARTITION_NAME_APP */
+# define CONFIG_KM_UBI_LINUX_MTD \
+ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \
+ CONFIG_KM_UBI_PART_BOOT_OPTS " " \
+ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP
+# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \
+ "ubiattach=if test ${boot_bank} -eq 0; then; " \
+ "ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "; else; " \
+ "ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
+#endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
+
+#ifdef CONFIG_NAND_ECC_BCH
+#define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0"
+#define CONFIG_KM_ECC_MODE " eccmode=bch"
+#else
+#define CONFIG_KM_UIMAGE_NAME "uImage\0"
+#define CONFIG_KM_ECC_MODE
+#endif
+
+/*
+ * boottargets
+ * - set 'subbootcmds'
+ * - set 'bootcmd' and 'altbootcmd'
+ * available targets:
+ * - 'release': for a standalone system kernel/rootfs from flash
+ */
+#define CONFIG_KM_DEF_ENV_BOOTTARGETS \
+ "subbootcmds=ubiattach ubicopy cramfsloadfdt set_fdthigh " \
+ "cramfsloadkernel flashargs add_default addpanic boot\0"\
+ "develop=" \
+ "tftp 200000 scripts/develop-${arch}.txt && " \
+ "env import -t 200000 ${filesize} && " \
+ "run setup_debug_env\0" \
+ "ramfs=" \
+ "tftp 200000 scripts/ramfs-${arch}.txt && " \
+ "env import -t 200000 ${filesize} && " \
+ "run setup_debug_env\0" \
+ ""
+
+/*
+ * bootargs
+ * - modify 'bootargs'
+ *
+ * - 'add_default': default bootargs common for all arm/ppc boards
+ * - 'addpanic': add kernel panic options
+ * - 'flashargs': defaults arguments for flash base boot
+ *
+ */
+#define CONFIG_KM_DEF_ENV_BOOTARGS \
+ "add_default=" \
+ "setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off:" \
+ " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \
+ " mem=${kernelmem} init=${init}" \
+ CONFIG_KM_ECC_MODE \
+ " phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
+ " " CONFIG_KM_UBI_LINUX_MTD " " \
+ CONFIG_KM_DEF_BOOT_ARGS_CPU \
+ "\0" \
+ "addpanic=" \
+ "setenv bootargs ${bootargs} panic=1 panic_on_oops=1\0" \
+ "flashargs=" \
+ "setenv bootargs " \
+ "root=mtdblock:rootfs${boot_bank} " \
+ "rootfstype=squashfs ro\0" \
+ ""
+
+/*
+ * flash_boot
+ * - commands for booting from flash
+ *
+ * - 'cramfsloadkernel': copy kernel from a cramfs to ram
+ * - 'ubiattach': attach ubi partition
+ * - 'ubicopy': copy ubi volume to ram
+ * - volume names: bootfs0, bootfs1, bootfs2, ...
+ *
+ * processor specific settings
+ * - 'cramfsloadfdt': copy fdt from a cramfs to ram
+ */
+#define CONFIG_KM_DEF_ENV_FLASH_BOOT \
+ "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0" \
+ "cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0" \
+ "ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR) \
+ " bootfs${boot_bank}\0" \
+ "uimage=" CONFIG_KM_UIMAGE_NAME \
+ CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
+
+/*
+ * constants
+ * - KM specific constants and commands
+ *
+ * - 'default': setup default environment
+ */
+#define CONFIG_KM_DEF_ENV_CONSTANTS \
+ "backup_bank=0\0" \
+ "release=run newenv; reset\0" \
+ "pnvramsize=" __stringify(CONFIG_KM_PNVRAM) "\0" \
+ "testbootcmd=setenv boot_bank ${test_bank}; " \
+ "run ${subbootcmds}; reset\0" \
+ ""
+
+#ifndef CONFIG_KM_DEF_ENV
+#define CONFIG_KM_DEF_ENV \
+ CONFIG_KM_DEF_ENV_BOOTPARAMS \
+ CONFIG_KM_DEF_NETDEV \
+ CONFIG_KM_DEF_ENV_CPU \
+ CONFIG_KM_DEF_ENV_BOOTTARGETS \
+ CONFIG_KM_DEF_ENV_BOOTARGS \
+ CONFIG_KM_DEF_ENV_FLASH_BOOT \
+ CONFIG_KM_DEF_ENV_CONSTANTS \
+ "altbootcmd=run bootcmd\0" \
+ "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \
+ "bootcmd=km_checkbidhwk && " \
+ "setenv bootcmd \'if km_checktestboot; then; " \
+ "setenv boot_bank ${test_bank}; else; " \
+ "setenv boot_bank ${actual_bank}; fi;" \
+ "run ${subbootcmds}; reset\' && " \
+ "setenv altbootcmd \'setenv boot_bank ${backup_bank}; " \
+ "run ${subbootcmds}; reset\' && " \
+ "saveenv && saveenv && boot\0" \
+ "bootlimit=3\0" \
+ "cramfsloadfdt=" \
+ "cramfsload ${fdt_addr_r} " \
+ "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \
+ "fdt_addr_r="__stringify(CONFIG_KM_FDT_ADDR) "\0" \
+ "init=/sbin/init-overlay.sh\0" \
+ "load_addr_r="__stringify(CONFIG_KM_KERNEL_ADDR) "\0" \
+ "load=tftpboot ${load_addr_r} ${u-boot}\0" \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ ""
+#endif /* CONFIG_KM_DEF_ENV */
+
+#define CONFIG_VERSION_VARIABLE /* include version env variable */
+
+#endif /* __CONFIG_KEYMILE_H */
Code Review / kvmfornfv.git / blobdiff