--- /dev/null
+/*
+ * (C) Copyright 2006
+ * MicroSys GmbH
+ *
+ * (C) Copyright 2009
+ * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+
+#define CONFIG_MPC5200
+#define CONFIG_MPX5200 1 /* MPX5200 board */
+#define CONFIG_MPC5200_DDR 1 /* use DDR RAM */
+#define CONFIG_IPEK01 /* Motherboard is ipek01 */
+
+#define CONFIG_SYS_TEXT_BASE 0xfc000000
+
+#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200 /* ... at 9600 bps */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+
+/*
+ * Video configuration for LIME GDC
+ */
+#define CONFIG_VIDEO
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_MB862xx
+#define CONFIG_VIDEO_MB862xx_ACCEL
+#define VIDEO_FB_16BPP_WORD_SWAP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */
+/* Lime clock frequency */
+#define CONFIG_SYS_MB862xx_CCF 0x90000 /* geo 166MHz other 133MHz */
+/* SDRAM parameter */
+#define CONFIG_SYS_MB862xx_MMR 0x41c767e3
+#endif
+
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+#define CONFIG_PCI_SCAN_SHOW 1
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+
+#define CONFIG_MII 1
+#define CONFIG_EEPRO100 1
+#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_OHCI_BE_CONTROLLER
+#define CONFIG_USB_STORAGE
+
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP /* BMP support */
+#endif
+#define CONFIG_CMD_DATE /* support for RTC, date/time...*/
+#define CONFIG_CMD_DHCP /* DHCP Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_IDE /* IDE harddisk support */
+#define CONFIG_CMD_IRQ /* irqinfo */
+#define CONFIG_CMD_MII /* MII support */
+#define CONFIG_CMD_PCI /* pciinfo */
+#define CONFIG_CMD_USB /* USB Support */
+
+#define CONFIG_SYS_LOWBOOT 1
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyPSC0\0" \
+ "hostname=ipek01\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} " \
+ "console=${consoledev},${baudrate}\0" \
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr} - ${fdtaddr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0" \
+ "net_nfs=tftp 200000 ${bootfile}; tftp ${fdtaddr} ${fdtfile};" \
+ "run nfsargs addip addtty;" \
+ "bootm ${loadaddr} - ${fdtaddr}\0" \
+ "rootpath=/opt/eldk/ppc_6xx\0" \
+ "bootfile=ipek01/uImage\0" \
+ "load=tftp 100000 ipek01/u-boot.bin\0" \
+ "update=protect off FC000000 +60000; era FC000000 +60000; " \
+ "cp.b 100000 FC000000 ${filesize}\0" \
+ "upd=run load;run update\0" \
+ "fdtaddr=800000\0" \
+ "loadaddr=400000\0" \
+ "fdtfile=ipek01/ipek01.dtb\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* for 133MHz */
+/* PCI clock must be 33, because board will not boot */
+#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for 66MHz */
+
+/*
+ * Open firmware flat tree support
+ */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+#define OF_CPU "PowerPC,5200@0"
+#define OF_SOC "soc5200@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
+
+#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_PCF8563
+#define CONFIG_SYS_I2C_RTC_ADDR 0x51
+
+#define CONFIG_SYS_FLASH_BASE 0xFC000000
+#define CONFIG_SYS_FLASH_SIZE 0x01000000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+/* use CFI flash driver */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SIZE 0x10000
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+
+/*
+ * Memory map
+ */
+#define CONFIG_SYS_MBAR 0xf0000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
+#define CONFIG_SYS_SRAM_BASE 0xF1000000
+#define CONFIG_SYS_SRAM_SIZE 0x00200000
+#define CONFIG_SYS_LIME_BASE 0xE4000000
+#define CONFIG_SYS_LIME_SIZE 0x04000000
+#define CONFIG_SYS_FPGA_BASE 0xC0000000
+#define CONFIG_SYS_FPGA_SIZE 0x10000000
+#define CONFIG_SYS_MPEG_BASE 0xe2000000
+#define CONFIG_SYS_MPEG_SIZE 0x01000000
+#define CONFIG_SYS_CF_BASE 0xe1000000
+#define CONFIG_SYS_CF_SIZE 0x01000000
+
+/* Use SRAM until RAM will be available */
+#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
+/* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
+
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+# define CONFIG_SYS_RAMBOOT 1
+#endif
+
+#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * GPIO configuration
+ */
+#define CONFIG_SYS_GPS_PORT_CONFIG 0x1d556624
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 16
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1...15 MB in DRAM */
+
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
+
+#define CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL HID0_ICE
+
+#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE
+#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_CS3_START CONFIG_SYS_LIME_BASE
+#define CONFIG_SYS_CS3_SIZE CONFIG_SYS_LIME_SIZE
+#define CONFIG_SYS_CS6_START CONFIG_SYS_FPGA_BASE
+#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_FPGA_SIZE
+#define CONFIG_SYS_CS5_START CONFIG_SYS_CF_BASE
+#define CONFIG_SYS_CS5_SIZE CONFIG_SYS_CF_SIZE
+#define CONFIG_SYS_CS7_START CONFIG_SYS_MPEG_BASE
+#define CONFIG_SYS_CS7_SIZE CONFIG_SYS_MPEG_SIZE
+
+#ifdef CONFIG_SYS_PCISPEED_66
+#define CONFIG_SYS_BOOTCS_CFG 0x0006F900
+#define CONFIG_SYS_CS1_CFG 0x0004FB00
+#define CONFIG_SYS_CS2_CFG 0x0006F900
+#else
+#define CONFIG_SYS_BOOTCS_CFG 0x0002F900
+#define CONFIG_SYS_CS1_CFG 0x0001FB00
+#define CONFIG_SYS_CS2_CFG 0x0002F90C
+#endif
+
+/*
+ * Ack active, Muxed mode, AS=24 bit address, DS=32 bit data, 0
+ * waitstates, writeswap and readswap enabled
+ */
+#define CONFIG_SYS_CS3_CFG 0x00FFFB0C
+#define CONFIG_SYS_CS6_CFG 0x00FFFB0C
+#define CONFIG_SYS_CS7_CFG 0x4040751C
+
+#define CONFIG_SYS_CS_BURST 0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE 0x33330000
+
+#define CONFIG_SYS_RESET_ADDRESS 0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00005000
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_IDE_PREINIT
+
+#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
+
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
+
+#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
+
+/* Offset for data I/O */
+#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
+
+/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
+
+/* Interval between registers */
+#define CONFIG_SYS_ATA_STRIDE 4
+
+#endif /* __CONFIG_H */
Code Review / kvmfornfv.git / blobdiff