Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / integratorcp.h

diff --git a/qemu/roms/u-boot/include/configs/integratorcp.h b/qemu/roms/u-boot/include/configs/integratorcp.h
new file mode 100644 (file)
index 0000000..608719a
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/integratorcp.h
@@ -0,0 +1,109 @@
+/*
+ * (C) Copyright 2003
+ * Texas Instruments.
+ * Kshitij Gupta <kshitij@ti.com>
+ * Configuation settings for the TI OMAP Innovator board.
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ * Configuration for Compact Integrator board.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "integrator-common.h"
+
+/* Integrator CP-specific configuration */
+#define CONFIG_ARCH_CINTEGRATOR
+#define CONFIG_SYS_HZ_CLOCK            1000000 /* Timer 1 is clocked at 1Mhz */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_SMC91111
+#define CONFIG_SMC_USE_32_BIT
+#define CONFIG_SMC91111_BASE    0xC8000000
+#undef CONFIG_SMC91111_EXT_PHY
+
+/* PL011 configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK     14745600
+#define CONFIG_PL01x_PORTS     { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
+#define CONFIG_CONS_INDEX      0
+#define CONFIG_BAUDRATE                38400
+#define CONFIG_SYS_SERIAL0             0x16000000
+#define CONFIG_SYS_SERIAL1             0x17000000
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_BOOTDELAY       2
+#define CONFIG_BOOTARGS        "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
+#define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
+#define CONFIG_SERVERIP 192.168.1.100
+#define CONFIG_IPADDR 192.168.1.104
+#define CONFIG_BOOTFILE "uImage"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_PROMPT      "Integrator-CP # "      /* Monitor Command Prompt */
+
+/*
+ * FLASH and environment organization
+ * Top varies according to amount fitted
+ * Reserve top 4 blocks of flash
+ * - ARM Boot Monitor
+ * - Unused
+ * - SIB block
+ * - U-Boot environment
+ *
+ * Base is always 0x24000000
+ */
+#define CONFIG_SYS_FLASH_BASE          0x24000000
+#define CONFIG_SYS_FLASH_CFI           1
+#define CONFIG_FLASH_CFI_DRIVER                1
+#define CONFIG_SYS_MAX_FLASH_SECT      64
+#define CONFIG_SYS_MAX_FLASH_BANKS     1               /* max number of memory banks */
+#define PHYS_FLASH_SIZE                        0x01000000      /* 16MB */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ)       /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ)       /* Timeout for Flash Write */
+
+#define CONFIG_SYS_MONITOR_LEN         0x00100000
+#define CONFIG_ENV_IS_IN_FLASH 1
+
+/*
+ * Move up the U-Boot & monitor area if more flash is fitted.
+ * If this U-Boot is to be run on Integrators with varying flash sizes,
+ * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
+ * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
+ * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
+ * embedded in the boot monitor(s) area
+ */
+#if ( PHYS_FLASH_SIZE == 0x04000000 )
+
+#define CONFIG_ENV_ADDR                0x27F00000
+#define CONFIG_SYS_MONITOR_BASE        0x27F40000
+
+#elif (PHYS_FLASH_SIZE == 0x02000000 )
+
+#define CONFIG_ENV_ADDR                0x25F00000
+#define CONFIG_SYS_MONITOR_BASE        0x25F40000
+
+#else
+
+#define CONFIG_ENV_ADDR                0x24F00000
+#define CONFIG_SYS_MONITOR_BASE        0x27F40000
+
+#endif
+
+#define CONFIG_ENV_SECT_SIZE   0x40000         /* 256KB */
+#define CONFIG_ENV_SIZE                8192            /* 8KB */
+
+#endif /* __CONFIG_H */