Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / iconnect.h

diff --git a/qemu/roms/u-boot/include/configs/iconnect.h b/qemu/roms/u-boot/include/configs/iconnect.h
new file mode 100644 (file)
index 0000000..a58f076
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/iconnect.h
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2009-2012
+ * Wojciech Dubowik <wojciech.dubowik@neratec.com>
+ * Luka Perkov <luka@openwrt.org>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef _CONFIG_ICONNECT_H
+#define _CONFIG_ICONNECT_H
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING    " Iomega iConnect"
+
+/*
+ * High level configuration options
+ */
+#define CONFIG_FEROCEON_88FR131                /* CPU Core subversion */
+#define CONFIG_KIRKWOOD                        /* SOC Family Name */
+#define CONFIG_KW88F6281               /* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
+
+/*
+ * Machine type
+ */
+#define CONFIG_MACH_TYPE       MACH_TYPE_ICONNECT
+
+/*
+ * Compression configuration
+ */
+#define CONFIG_BZIP2
+#define CONFIG_LZMA
+#define CONFIG_LZO
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH            /* declare no flash (NOR/SPI) */
+#define CONFIG_SYS_MVFS
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT      "iconnect => "
+
+/*
+ * Environment variables configuration
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SECT_SIZE   0x20000
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+#define CONFIG_ENV_SIZE                0x20000
+#define CONFIG_ENV_OFFSET      0x80000
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND \
+       "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "     \
+       "ubi part rootfs; "                                             \
+       "ubifsmount ubi:rootfs; "                                       \
+       "ubifsload 0x800000 ${kernel}; "                                \
+       "bootm 0x800000"
+
+#define CONFIG_MTDPARTS \
+       "mtdparts=orion_nand:"          \
+       "0x80000@0x0(uboot),"           \
+       "0x20000@0x80000(uboot_env),"   \
+       "-@0xa0000(rootfs)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "console=console=ttyS0,115200\0"        \
+       "mtdids=nand0=orion_nand\0"             \
+       "mtdparts="CONFIG_MTDPARTS              \
+       "kernel=/boot/uImage\0"                 \
+       "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
+
+/*
+ * Ethernet driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS     {1, 0}  /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR    11
+#undef CONFIG_RESET_PHY_R
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * File system
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+
+#endif /* _CONFIG_ICONNECT_H */