Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / highbank.h

diff --git a/qemu/roms/u-boot/include/configs/highbank.h b/qemu/roms/u-boot/include/configs/highbank.h
new file mode 100644 (file)
index 0000000..a6202cf
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/highbank.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <config_distro_defaults.h>
+
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_THUMB_BUILD
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_FIT
+#define CONFIG_SYS_BOOTMAPSZ           (16 << 20)
+
+#define CONFIG_SYS_TIMER_RATE          (150000000/256)
+#define CONFIG_SYS_TIMER_COUNTER       (0xFFF34000 + 0x4)
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN          (512 * 1024)
+
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK             150000000
+#define CONFIG_PL01x_PORTS             { (void *)(0xFFF36000) }
+#define CONFIG_CONS_INDEX              0
+
+#define CONFIG_BAUDRATE                        115200
+
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
+#define CONFIG_SYS_BOOTCOUNT_LE                /* Use little-endian accessors */
+#define CONFIG_SYS_BOOTCOUNT_ADDR      0xfff3cf0c
+
+#define CONFIG_MISC_INIT_R
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID    5
+#define CONFIG_SYS_SCSI_MAX_LUN                1
+#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                       CONFIG_SYS_SCSI_MAX_LUN)
+
+#define CONFIG_CALXEDA_XGMAC
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_SCSI
+
+#define CONFIG_BOOT_RETRY_TIME         -1
+#define CONFIG_RESET_TO_RETRY
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds...\nPress <s> to stop or <d> to delay\n", bootdelay
+#define CONFIG_AUTOBOOT_KEYED_CTRLC
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS             16      /* max number of cmd args */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
+                                        sizeof(CONFIG_SYS_PROMPT)+16)
+
+#define CONFIG_SYS_LOAD_ADDR           0x800000
+#define CONFIG_SYS_64BIT_LBA
+
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM_1_SIZE              (4089 << 20)
+#define CONFIG_SYS_MEMTEST_START       0x100000
+#define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_1_SIZE - 0x100000)
+
+/* Environment data setup
+*/
+#define CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_SYS_NVRAM_BASE_ADDR     0xfff88000      /* NVRAM base address */
+#define CONFIG_SYS_NVRAM_SIZE          0x8000          /* NVRAM size */
+#define CONFIG_ENV_SIZE                        0x2000          /* Size of Environ */
+#define CONFIG_ENV_ADDR                        CONFIG_SYS_NVRAM_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE          0x00000000
+#define CONFIG_SYS_TEXT_BASE           0x00008000
+#define CONFIG_SYS_INIT_SP_ADDR                0x01000000
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#endif