Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / h2200.h

diff --git a/qemu/roms/u-boot/include/configs/h2200.h b/qemu/roms/u-boot/include/configs/h2200.h
new file mode 100644 (file)
index 0000000..d026484
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/h2200.h
@@ -0,0 +1,168 @@
+/*
+ * iPAQ h2200 board configuration
+ *
+ * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define MACH_TYPE_H2200                        341
+#define CONFIG_MACH_TYPE               MACH_TYPE_H2200
+
+#define CONFIG_CPU_PXA25X              1
+#define CONFIG_BOARD_H2200
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM_1                   0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE              0x04000000 /* 64 MB */
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_SDRAM_SIZE          PHYS_SDRAM_1_SIZE
+
+#define CONFIG_SYS_INIT_SP_ADDR                0xfffff800
+
+#define CONFIG_ENV_SIZE                        0x00040000
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128*1024)
+
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_MAXARGS             16
+#define CONFIG_SYS_LOAD_ADDR           0xa3000000 /* default load address */
+
+/*
+ * iPAQ 1st stage bootloader loads 2nd stage bootloader
+ * at address 0xa0040000 but bootloader requires header
+ * which is 0x1000 long.
+ *
+ * --- Header begin ---
+ *     .word 0xea0003fe ; b 0x1000
+ *
+ *     .org 0x40
+ *     .ascii "ECEC"
+ *
+ *     .org 0x1000
+ * --- Header end ---
+ */
+
+#define CONFIG_SYS_TEXT_BASE           0xa0041000
+
+/*
+ * Static chips
+ */
+
+#define CONFIG_SYS_MSC0_VAL            0x246c7ffc
+#define CONFIG_SYS_MSC1_VAL            0x7ff07ff0
+#define CONFIG_SYS_MSC2_VAL            0x7ff07ff0
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+
+#define CONFIG_SYS_MECR_VAL            0x00000000
+#define CONFIG_SYS_MCMEM0_VAL          0x00000000
+#define CONFIG_SYS_MCMEM1_VAL          0x00000000
+#define CONFIG_SYS_MCATT0_VAL          0x00000000
+#define CONFIG_SYS_MCATT1_VAL          0x00000000
+#define CONFIG_SYS_MCIO0_VAL           0x00000000
+#define CONFIG_SYS_MCIO1_VAL           0x00000000
+
+#define CONFIG_SYS_FLYCNFG_VAL         0x00000000
+#define CONFIG_SYS_SXCNFG_VAL          0x00040004
+
+#define CONFIG_SYS_MDREFR_VAL          0x0099E018
+#define CONFIG_SYS_MDCNFG_VAL          0x01C801CB
+#define CONFIG_SYS_MDMRS_VAL           0x00220022
+
+#define CONFIG_SYS_PSSR_VAL            0x00000000
+#define CONFIG_SYS_CKEN                        0x00004840
+#define CONFIG_SYS_CCCR                        0x00000161
+
+/*
+ * GPIOs
+ */
+
+#define CONFIG_SYS_GPSR0_VAL           0x01000000
+#define CONFIG_SYS_GPSR1_VAL           0x00000000
+#define CONFIG_SYS_GPSR2_VAL           0x00010000
+
+#define CONFIG_SYS_GPCR0_VAL           0x00000000
+#define CONFIG_SYS_GPCR1_VAL           0x00000000
+#define CONFIG_SYS_GPCR2_VAL           0x00000000
+
+#define CONFIG_SYS_GPDR0_VAL           0xF7E38C00
+#define CONFIG_SYS_GPDR1_VAL           0xBCFFBF83
+#define CONFIG_SYS_GPDR2_VAL           0x000157FF
+
+#define CONFIG_SYS_GAFR0_L_VAL         0x80401000
+#define CONFIG_SYS_GAFR0_U_VAL         0x00000112
+#define CONFIG_SYS_GAFR1_L_VAL         0x600A9550
+#define CONFIG_SYS_GAFR1_U_VAL         0x0005AAAA
+#define CONFIG_SYS_GAFR2_L_VAL         0x20000000
+#define CONFIG_SYS_GAFR2_U_VAL         0x00000000
+
+/*
+ * Serial port
+ */
+
+#define CONFIG_PXA_SERIAL
+#define CONFIG_FFUART
+#define CONFIG_CONS_INDEX              3
+
+#define CONFIG_BAUDRATE                        115200
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 38400, 115200 }
+
+#define CONFIG_CMD_IMPORTENV           1
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_IMI
+
+#define CONFIG_FIT
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT              "> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "$ "
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
+                                       sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_USB_DEV_PULLUP_GPIO     33
+/* USB VBUS GPIO 3 */
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY               2
+#define CONFIG_BOOTCOMMAND             \
+       "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
+       "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
+       "source :script ; " \
+       "bootm ; "
+
+#define CONFIG_USB_GADGET_PXA2XX
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_SUBSET
+
+#define CONFIG_USBNET_DEV_ADDR         "de:ad:be:ef:00:01"
+#define CONFIG_USBNET_HOST_ADDR        "de:ad:be:ef:00:02"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "stdin=serial\0" \
+       "stdout=serial\0" \
+       "stderr=serial\0"
+
+#endif /* __CONFIG_H */