Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / dreamplug.h

diff --git a/qemu/roms/u-boot/include/configs/dreamplug.h b/qemu/roms/u-boot/include/configs/dreamplug.h
new file mode 100644 (file)
index 0000000..b1ca859
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/dreamplug.h
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2011
+ * Jason Cooper <u-boot@lakedaemon.net>
+ *
+ * Based on work by:
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Siddarth Gore <gores@marvell.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef _CONFIG_DREAMPLUG_H
+#define _CONFIG_DREAMPLUG_H
+
+/*
+ * FIXME: This belongs in mach-types.h.  However, we only pull mach-types
+ * from Linus' kernel.org tree.  This hasn't been updated primarily due to
+ * the recent arch/arm reshuffling.  So, in the meantime, we'll place it
+ * here.
+ */
+#include <asm/mach-types.h>
+#ifdef MACH_TYPE_DREAMPLUG
+#error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
+#else
+#define MACH_TYPE_DREAMPLUG            3550
+#endif
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING    "\nMarvell-DreamPlug"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_SHEEVA_88SV131  1       /* CPU Core subversion */
+#define CONFIG_KIRKWOOD                1       /* SOC Family Name */
+#define CONFIG_KW88F6281       1       /* SOC Name */
+#define CONFIG_MACH_TYPE       MACH_TYPE_DREAMPLUG
+#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ *  Environment variables configurations
+ */
+#ifdef CONFIG_SPI_FLASH
+#define CONFIG_ENV_IS_IN_SPI_FLASH     1
+#define CONFIG_ENV_SECT_SIZE           0x10000 /* 64k */
+#else
+#define CONFIG_ENV_IS_NOWHERE          1       /* if env in SDRAM */
+#endif
+
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH               1
+#define CONFIG_HARD_SPI                        1
+#define CONFIG_KIRKWOOD_SPI            1
+#define CONFIG_SPI_FLASH_MACRONIX      1
+#define CONFIG_ENV_SPI_BUS             0
+#define CONFIG_ENV_SPI_CS              0
+#define CONFIG_ENV_SPI_MAX_HZ          50000000 /* 50 MHz */
+#endif
+
+/*
+ * max 4k env size is enough, but in case of nand
+ * it has to be rounded to sector size
+ */
+#define CONFIG_ENV_SIZE                        0x1000  /* 4k */
+#define CONFIG_ENV_ADDR                        0x100000
+#define CONFIG_ENV_OFFSET              0x100000 /* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND             "setenv ethact egiga0; " \
+       "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
+       "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
+       "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
+       "bootm 0x6400000;"
+
+#define CONFIG_EXTRA_ENV_SETTINGS      \
+       "x_bootcmd_ethernet=ping 192.168.2.1\0" \
+       "x_bootcmd_usb=usb start\0"     \
+       "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
+       "x_bootargs=console=ttyS0,115200\0"     \
+       "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS     {1, 1}  /* enable both ports */
+#define CONFIG_PHY_BASE_ADR    0
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * SATA Driver configuration
+ */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET     MV_SATA_PORT0_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
+
+/*
+ * RTC driver configuration
+ */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_MV
+#endif /* CONFIG_CMD_DATE */
+
+#define CONFIG_SYS_ALT_MEMTEST
+
+/*
+ * display enhanced info about the cpu at boot.
+ */
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_OF_LIBFDT
+
+#endif /* _CONFIG_DREAMPLUG_H */