Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / devkit3250.h

diff --git a/qemu/roms/u-boot/include/configs/devkit3250.h b/qemu/roms/u-boot/include/configs/devkit3250.h
new file mode 100644 (file)
index 0000000..bd96a7d
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/devkit3250.h
@@ -0,0 +1,101 @@
+/*
+ * Embest/Timll DevKit3250 board configuration file
+ *
+ * Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_DEVKIT3250_H__
+#define __CONFIG_DEVKIT3250_H__
+
+/* SoC and board defines */
+#include <linux/sizes.h>
+#include <asm/arch/cpu.h>
+
+/*
+ * Define DevKit3250 machine type by hand until it lands in mach-types
+ */
+#define MACH_TYPE_DEVKIT3250           3697
+#define CONFIG_MACH_TYPE               MACH_TYPE_DEVKIT3250
+
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/*
+ * Memory configurations
+ */
+#define CONFIG_NR_DRAM_BANKS           1
+#define CONFIG_SYS_MALLOC_LEN          SZ_1M
+#define CONFIG_SYS_SDRAM_BASE          EMC_DYCS0_BASE
+#define CONFIG_SYS_SDRAM_SIZE          SZ_64M
+#define CONFIG_SYS_TEXT_BASE           0x83FA0000
+#define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE + SZ_32K)
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - SZ_1M)
+
+#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + SZ_32K)
+
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + SZ_4K \
+                                        - GENERATED_GBL_DATA_SIZE)
+
+/*
+ * Serial Driver
+ */
+#define CONFIG_SYS_LPC32XX_UART                2   /* UART2 */
+#define CONFIG_BAUDRATE                        115200
+
+/*
+ * NOR Flash
+ */
+#define CONFIG_CMD_FLASH
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_MAX_FLASH_SECT      71
+#define CONFIG_SYS_FLASH_BASE          EMC_CS0_BASE
+#define CONFIG_SYS_FLASH_SIZE          SZ_4M
+#define CONFIG_SYS_FLASH_CFI
+
+/*
+ * U-Boot General Configurations
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE              1024
+#define CONFIG_SYS_PBSIZE              \
+       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS             16
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE                        SZ_128K
+
+/*
+ * U-Boot Commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
+
+/*
+ * Boot Linux
+ */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_BOOTDELAY               3
+
+#define CONFIG_BOOTFILE                        "uImage"
+#define CONFIG_BOOTARGS                        "console=ttyS2,115200n8"
+#define CONFIG_LOADADDR                        0x80008000
+
+/*
+ * Include SoC specific configuration
+ */
+#include <asm/arch/config.h>
+
+#endif  /* __CONFIG_DEVKIT3250_H__*/